LED High Bay Light operates in hazardous areas.

Larson Electronics, LLC    Kemp, TX 75143
Jun 17, 2013 Rated at 240 W, Model HAL-HB-240W-LED comes close to replicating 1,000 W metal halide illumination. Unit is available with 19, 25, 40, or 125° optic configuration, and is designed for Class 1 Division 2 areas where dusts or vapors are expected only under unusual situations. Operating on 90–277 Vac, 50/60 Hz, standard 19,000 lumen configuration is available in 6,500, 4,300, and 3,500 k white color.

Small Area LED Light features curved, non-snag design.

Larson Electronics, LLC    Kemp, TX 75143
Jun 12, 2013 Measuring 1.81 in. long and .53 in. thick, LEDSM-1X30-C Bat Wing Light features wing-shaped, low-profile, minimally intrusive design for small areas such as closets, walkways, and stairwells. Operating on 12 Vdc while drawing 30 mA, light is also suitable for utility panels, control system panels, meters and gauges, where operators need light that will not catch on clothing or gloves.

Hazardous Location LED Light includes battery backup system.

Larson Electronics, LLC    Kemp, TX 75143
Jun 11, 2013 Featuring explosion proof design, Model EPL-EMG-48-4L-LED-G2 features four 4 ft LED tubes, copper-free aluminum housing, and heavy-gauge aluminum reflectors with high-gloss finish. Automatic battery backup system maintains onboard battery at fully charged state during normal operation. If power is cut, emergency backup automatically kicks in and powers light for UL standard of 90 minutes. Light runs from standard 120-277 Vac universal voltages but is also available in 12/24 Vdc configurations.

Explosionproof Fluorescent Emergency Light resists corrosion.

Larson Electronics, LLC    Kemp, TX 75143
Jun 04, 2013 Approved for Class 1 Div 2 locations, Model HALP-EMG-48-2L-T8 utilizes two 2 ft long T8 fluorescent bulbs that produce combined total of 5,900 lumens. Unit runs from standard 120–277 Vac electrical current, but when power is abnormally cut, emergency battery backup automatically kicks in and runs light for 90 minutes at reduced output. Fixture features glass reinforced polyester body with poured in gasket, acrylic lens that also acts as diffuser, and stainless steel latches for access to lamps.

Explosion Proof LED Emergency Light integrates battery backup.

Larson Electronics, LLC    Kemp, TX 75143
Jun 04, 2013 Accommodating needs of operators in hazardous locations, EPL-EMG-48-4L-LED-G2 uses second generation LED tubes with 50,000 hr rating and has automatic battery backup system for 90 min of continued operation during power failures/outages. Failsafe unit is U.S./Canada UL approved Class 1 Division 1 and 2 as well as Class 2 Division 1 and 2 for areas where flammable chemical and petrochemical vapors are present. Also, light carries paint spray booth certification with T6 temperature rating.

Pneumatic Light Tower features dual metal halide lamps.

Larson Electronics, LLC    Kemp, TX 75143
May 31, 2013 Producing flood pattern capable of illuminating 2+ acres, PLM-18-2X1000W employs lamp assembly comprised of two 1,000 W metal halide fixtures. Lamps produce 110,000 lm each and are mounted with independent brackets for adjustability. Able to be deployed in minutes by one person, adjustable 3-stage tower is powered by compressed air provided via included 1/3 hp compressor. Full extended height is 18 ft, and minimum collapsed height is 8 ft.

LED Emergency Light operates in hazardous locations.

Larson Electronics, LLC    Kemp, TX 75143
May 30, 2013 Approved for Class 1 Div 2 locations, Model HALP-EMG-48-2L-LED-G2 features glass reinforced polyester construction and acrylic diffuser lens cover sealed with gasket for resistance to wetness, rust, and corrosion. Explosion proof fixture operates from 120–277 Vac during normal operation, but if power is abruptly cut, emergency backup battery automatically engages and powers light for 90 min. Once power is restored, operation returns to normal and charging system returns battery to ready state.

Pneumatic Light Tower features 5 LED fixtures.

Larson Electronics, LLC    Kemp, TX 75143
May 28, 2013 Extendable to 18 ft using 1/3 hp compressor, Model PLM-18-5X150W-LED features five 150 W LED lamps producing total of 79,350 lm of light output in wide flood pattern for uniform coverage of large scale work areas. Industrial-grade lights are IP68-rated waterproof to submersion up to 3 m. Units have extruded aluminum housings and shatterproof polycarbonate lenses. Operating from standard 110–120 Vac power sources, tower can be mounted to trailers, truck beds, or any secure flat surface.

Dual Head LED Light Tower operates in hazardous locations.

Larson Electronics, LLC    Kemp, TX 75143
May 23, 2013 Equipped with dual 150 W LED light fixtures, explosionproof HAL-2X150MCE-LED produces 29,580 lm of light capable of illuminating 36,000 ft² work area. LED lights are fitted within heavy-duty housings constructed of powder coated aluminum with hinged tempered glass doors. Assemblies are sealed with gaskets and are IP65-rated, making them resistant to wet and corrosive environments. Height adjustable tower assembly, constructed of non-sparking aluminum, is mounted to wheeled cart for portability.

Heavy-Duty LED Light delivers over 29,000 lumens.

Larson Electronics, LLC    Kemp, TX 75143
May 22, 2013 Fitted with PWM LED drivers and CREE XLamp-XPG® emitters, Model LEDP5W-60-1227-20C provides 29,580 lumens of light output from 300 W of power. Unit features extruded aluminum housing and unbreakable polycarbonate lens. Rated IP68 waterproof to 3 m of submersion, light is equipped with waterproof inline transformer and 20 ft of cord that allows operation with standard 120–277 Vac. By disconnecting transformer, users can run light from 12 or 24 Vdc power source.