Telescopic Linear Actuator incorporates high-speed drive.

SERAPID, Inc.    Sterling Heights, MI 48314
Nov 22, 2010 RigiBelt has non-magnetic design and integrates compact drive system, which is rated up to 300 mm/s and has 1,000 N capacity. Drive integrates into existing environments and is made of non-magnetic materials such as aluminum, POM, and other stainless materials. Entirely mechanical, actuator is made of 2 reinforced plastic belts that interlock together to form rigid telescopic column. It moves quickly while telescoping in and out and can provide horizontal or vertical motion.

Spindle Actuators are powered with 24 Vdc motor.

SERAPID, Inc.    Sterling Heights, MI 48314
Apr 06, 2010 Designed for small load capacities and low cycles, spindle actuators feature strokes up to 1,500 mm, push/pull force of 5,660 N, and speed of 25 mm/sec. They have electronic controlled emergency stop, anodized aluminum housing, and pushrod made of either aluminum or steel. With fully adjustable mounting, units are suited for lifting or pulling loads in environments with no space constraints. Actuators feature cut off at either end position using integrated limit switches.

Telescopic Mast can be deployed at wind speeds up to 80 mph.

SERAPID, Inc.    Sterling Heights, MI 48314
Oct 15, 2009 Designed for communications, reconnaissance, and surveillance applications, Telescopic Mast System can reach heights of 60 ft or more with loads of over 1,000 lb, and is capable of resisting lateral loads and withstanding high wind situations. Self-guided lifting column is powered by Rigid Chain, which is a mechanical actuator that is flexible in one direction and forms steel beam in other direction. Custom-designed as well as harsh environment models are available.

Telescopic Linear Actuator offers transfer speed of 6.5 fps.

SERAPID, Inc.    Sterling Heights, MI 48314
Sep 28, 2009 Providing push-pull solution with Rigid Chain, RollBeam Mechanical Actuator can be used for vertical as well as horizontal transfer, since chain can be stored above or below path of travel. Standard models cover applications up to 50 tons and offer travel distance of 3.3 ft to virtually unlimited. Suited for heavy-duty applications, actuator is also available in versions that operate in harsh environments.

Bolster Extensions feature motorized design.

SERAPID, Inc.    Sterling Heights, MI 48314
Sep 02, 2009 Designed for Quick Die eXchange (QDX) equipment, Motorized Bolster Extensions (MBEs) combine functionality of bolster extensions and push-pull systems into one integrated unit. They support die outside of press and move die in and out of press. Able to be loaded with overhead crane or fork-truck, each product features Rigid Chain Technology that allows die to be positioned several inches onto bolster without special attachments. Capacity ranges from 10-25 tons.

Telescopic Linear Actuator has non-magnetic design.

SERAPID, Inc.    Sterling Heights, MI 48314
Apr 01, 2009 Made of 2 reinforced plastic belts that interlock together to form rigid telescopic column, RigiBelt is totally mechanical and can provide horizontal or vertical motion. RigiBelt SD (Standard Drive) is self-contained, off-the-shelf actuator driven by 24 Vdc motor. Supporting capacities from 10 N to 85 daN and speeds from 25-50 mm/sec, actuator weighs 2 kg and is suited for use in medical, pharmaceutical, aerospace, architectural, and industrial markets.

Quick Die Change Clamps come in sizes ranging from 20-100 kN.

SERAPID, Inc.    Sterling Heights, MI 48314
Mar 06, 2009 Designed to work with dies with flat edge, PSH C-Clamp forms bracket device when mounted on T-profiled base, which is then manually inserted into slot on bolster or slide. Hydraulically activated clamp can be opened with spring, and clamping height can be individually configured through height of base piece or using custom-sized spacer.

Linear Beam functions as rodless linear actuator.

SERAPID, Inc.    Sterling Heights, MI 48314
Aug 01, 2007 Providing versatility across many different industries, LinearBeam can withstand harsh, demanding operating conditions while extending forces up to 2 hundred tons. Unit can also extend to virtually any stroke length without limitation. Possible applications include nuclear waste transport, steel mill transfer, off-shore skid movement, and furnace loading.

High-Temperature Clamps suit forging applications.

SERAPID, Inc.    Sterling Heights, MI 48314
Jul 31, 2007 Installed on press bolster or ram, TBHS Escaping Arc Clamp moves in arced path to eliminate possibility of sticking. It is designed for forging applications where die swelling is of concern and suits automated systems where position sensing is required. Optional sensors are available to detect clamped and unclamped positions, and mechanical safety detent ensures dies will not drop in case of pressure failure. Range of sizes is available, accommodating dies from 2-63 metric tons.

Rigid Chain incorporates non-magnetic actuator.

SERAPID, Inc.    Sterling Heights, MI 48314
Jul 11, 2007 Made of reinforced plastic and stainless steel, RigiBelt has 2 belts that come together with zipper-like action to form rigid column. Solution moves quietly while telescoping in and out and is stored in compact magazine. Driven with electric motor, chain can handle loads from 2-1,100 lbf, is entirely mechanical, and comes in stroke lengths up to 6 ft unguided. Product suits any kind of positioning in medical equipment and areas where non-magnetic components are essential.