Latest New Product News from Sumner Mfg. Co.
Portable Aluminum Gantry Lift has lockable legs and casters.Sumner Mfg. Co. Houston, TX 77088 4036
Nov 19, 2012 Suited for mechanical contractors, GH2T Gantry Lift features 4,400 lb capacity and comes in 8, 10, 12, and 15 ft as well as 3, 4, and 5 m sizes. Unit consists of two A-frames, each with two 8 in. casters that lock at 90° angles, and frame legs that lock in opened or closed position using pushbutton release. Set screw on trolley secures it to cross beam offered in 7 sizes. Designed to be erected by 2-man crew, product has ground to lifting eye height range of 83-113 in. and weighs 285-331 lb.
Aluminum Gantry Lift offers 4,400 lb capacity.Sumner Mfg. Co. Houston, TX 77088 4036
Apr 23, 2012 Intended for mechanical contractors, Model GH2T is available with cross beams in 8, 10, 12, and 15 ft sizes as well as 3, 4, and 5 m sizes. Two A-frames lock in folded position using plunger pins and feature removable quick action locking pin. With adjustable lifting handle, height adjustments can be made in 6 in. increments. Minimum and maximum heights from ground to lifting eye are 83 and 113 in., respectively, and maximum height to top of trolley is 113.5 in.
Rotary Internal Ground Clamp suits pipe welding applications.Sumner Mfg. Co. Houston, TX 77088 4036
Apr 17, 2012 With positive ground and firm hold, Rotary Internal Ground Clamp keeps ground wire stationary as pipe rotates in welding applications. Brass product, able to be used horizontally or vertically with manual, semi-automatic, or fully automatic welding applications, has 3 mandrels that provide contact to pipe ID. C-type rotary ground incorporates stationary and movable contact plate that rotates 360°, positive anti-arc bearings take loads up to 500 A.
Contractor Lift moves 450 lb loads vertically up to 17 ft.Sumner Mfg. Co. Houston, TX 77088 4036
Feb 01, 2012 Featuring stowed height of 62 ¾ in., Model 2416 is equipped with stabilizer legs and 4 mast sections that extend or lower as user cranks lift winch. Reversible fork can be fitted with fork extensions, pipe cradles, or 24 x 28 in. steel tray. Inside-mast cable feed keeps cable out of operator's face, while pulley guards prevent load cables from coming off during transport. Positioned behind winch assembly and at bottom of unit, wheels enable user to lay lift down and roll it into vehicle.
Weld Gas Analyzers measure oxygen in weld gas chambers.Sumner Mfg. Co. Houston, TX 77088 4036
Nov 30, 2011 Designed to monitor oxygen levels in welding applications where avoiding oxidation is critical, Ar-Gone Weld Gas Analyzer measures oxygen levels down to 0.01%, while hermetically sealed Argo-Naught Weld Gas Analyzer measures oxygen down to 0.1%. Both units feature replaceable batteries and oxygen sensors. Supplied in nylon case, analyzers include 6½ ft rubber hose with stainless steel probe, rubber aspirator bulb, carrying strap, and operator manual.
Pipe Clamp secures pipe and fittings to pipe stands.Sumner Mfg. Co. Houston, TX 77088 4036
Nov 29, 2011 Designed to secure ¾-6 in. diameter pipe to standard vee head pipe stands, Hold-E steel frame pipe clamp is equipped with quick release button that allows welder to open and close gripping arms in seconds. After positioning ram, few turns of feed screw secures pipe or tubing to jack stand. Measuring 10.31 x 2.12 x 15.75 in. in stored position, clamp is suitable for holding pipe during flange fit-up or when fabricating pipe with branches.
Inflatable Weld Purge Dams help minimize argon consumption.Sumner Mfg. Co. Houston, TX 77088 4036
Nov 29, 2011 Designed for use with 2-14 in. diameter stainless pipe, Inflatable Weld Purge Dams create reduced oxygen weld chamber where it is critical to avoid oxidation in weld. Units are constructed using primary and secondary inflatable dam at either end that are covered with heat- and spark-resistant double-stitched Proban® cotton and connected with 12-14 in. armored stainless steel spinal hose. Dams are suitable for welding exotic metals such as stainless, duplex, or titanium.
Pipe Jack features folding legs for compact storage.Sumner Mfg. Co. Houston, TX 77088 4036
Sep 23, 2005 Pack-Jack, part No. 781100, has folding legs made from 1 in. square tubing and adjustment screw made from heavy wall tubing. In folded position, legs are less susceptible to damage and occupy one third of space taken up by non-folded jack. Product comes with standard vee head, but ball transfers can be used with vee for alternate head option. Able to handle up to 36 in. dia pipe, it has 2,000 lb capacity and carrying handle for portability.
Material Handling Carts fold and store without tools.Sumner Mfg. Co. Houston, TX 77088 4036
Jun 28, 2004 Mac Rackâ„¢ and Mac Rack IIâ„¢ each have 8 storage arms and are suited for transporting conduit, strut, threaded rod, PVC pipe, and copper tubing. With one large cradle, Bundle Macâ„¢ transports larger quantities of same materials. Functioning as platform truck, Flat Macâ„¢ moves large, heavy objects around jobsite, while 'Tainer Macâ„¢ lifts boxed wire, hand tools, and other jobsite materials to elevated location. Each stackable cart has 6 in. casters and powder-coat finish.
Wire Carts have spindle-locking mechanism.Sumner Mfg. Co. Houston, TX 77088 4036
Jun 28, 2004 Offered in 4 models, Caddy Mac® wire carts feature wire guides for smooth feeding from spool (Caddy Mac No. 3) and bottom platform that allows cart to be used as dolly (Caddy Mac No. 1 and 3). Spindle-locking system ensures that spindles stay put during transportation. Spindles swing out to set position, facilitating loading of wire spools. Caddy Mac No. 3 can hold one 24 in. dia spool, while Caddy Mac No. 2 holds up to 24 smaller spools.
Click below for more Product News from Sumner Mfg. Co.
Other Company News From Sumner Mfg. Co.
Nov 05, 2012
Sumner Manufacturing Announces New Ultra Qwik Clamp & Ultra Qwik Fit
|Home | My ThomasNet News® | Industry Market Trends® | Submit Release | Advertise | Contact News | About Us|
Brought to you by Thomasnet.com
Browse ThomasNet Directory|