XRF Analyzer enables lab-quality analysis in remote locations.

AMETEK Spectro Analytical Instruments Inc.    Mahwah, NJ 07430
Mar 26, 2013 Measuring 10.7 x 12.1 x 12.1 in., SPECTROSCOUT Portable Energy Dispersive X-ray Fluorescence Analyzer provides elemental analysis of environmental and geological samples, even in remote locations. Unit features large sample compartment, X-ray tube, onboard processor, and battery pack. SPECTROSCOUT provides precise measurements from trace to major concentrations across range of relevant elements from heavy elements, such as uranium, to light elements, such as sodium, with 10–15 min turnaround.

Handheld XRF Spectrometer analyzes precious metals.

AMETEK Spectro Analytical Instruments Inc.    Mahwah, NJ 07430
Dec 21, 2012 With application package for precious metal analysis, SPECTRO xSORT can identify gold and silver content in jewelry alloys within seconds. Non-destructive measurement, conducted upon button actuation, makes portable instrument suitable for applications in archaeometallurgy. For precious metal recycling, unit offers security for buyer and seller by showing precious metal content to both parties. Optional integrated video camera can be used to precisely determine measuring point.

Spectrometer uses ETV for solid material analysis.

AMETEK Spectro Analytical Instruments Inc.    Mahwah, NJ 07430
Dec 17, 2012 Using electrothermal vaporization for sample introduction, SPECTRO ARCOS ICP-OES Spectrometer penetrates sensitivity range of flow discharge sector field mass spectrometers, opening application areas in solid material analysis. When using ETV, solid samples are vaporized in oven at up to 3,000°C. Graphite vaporization chamber uses argon as inert gas. After vaporization, analyte is transported as dry aerosol to ICP instrument with argon/reaction gas stream. Sample vaporization takes just 2 minutes.

Mobile Metal Analyzers include plasma generator.

AMETEK Spectro Analytical Instruments Inc.    Mahwah, NJ 07430
Mar 13, 2012 Incorporating transport trolley and 15 in. display, SPECTROTEST Metal Analyzers utilize pluggable UV probe for both spark and arc excitation. Units can identify low-alloy steels using carbon content in rapid arc excitation mode. In spark excitation mode, devices can analyze carbon, phosphorous, and sulfur. Incorporated plasma generator makes it possible to do hundreds of measurements with single battery charge, and ICAL logic system monitors correct state of measuring system.

Handheld EDXRF Spectrometer enables high-throughput analysis.

AMETEK Spectro Analytical Instruments Inc.    Mahwah, NJ 07430
Oct 19, 2011 SPECTRO xSORT energy dispersive X-ray fluorescence (EDXRF) spectrometer enables in-field elemental testing and spectro-chemical analysis of metals and other materials. Available with integrated video camera and GPS, instrument provides grade identification and material verification for metals and most alloys within 2 sec of clicking trigger; light-metal alloys require 12 sec to process. Other features include grade libraries, SDD detector, and detection limits down to ppm range.

Spectrometer can perform trace analysis of pure metals.

AMETEK Spectro Analytical Instruments Inc.    Mahwah, NJ 07430
Jun 30, 2011 SPECTROLAB offers photomultiplier detectors relative to single spark evaluation and time-resolved spectroscopy along with flexible line selection and ability to combine analytical and reference lines from charge-coupled device detectors. Optical resolution and 750 nm focal width in both optical segments maximize results for trace analysis of pure metals as well as examination of all conceivable material combinations and alloys. Instrument makes entire spectrum, from 120-780 nm, available.

Mass Spectrometer provides simultaneous measurements.

AMETEK Spectro Analytical Instruments Inc.    Mahwah, NJ 07430
Jun 09, 2010 Featuring inductively coupled plasma, SPECTRO MS simultaneously records entire elemental spectrum between lithium and uranium for every analysis. Ion optic transports ions from plasma into spectrometer, while removing neutral particles and photons from beam. Direct charge detector with 4,800 channels is placed in focal plane of spectrometer measuring mass spectrum with average of 20 channels/isotope. By recording contents of different isotopes, instrument opens variety of applications.

Spectrometer provides ultra-trace analysis.

AMETEK Spectro Analytical Instruments Inc.    Mahwah, NJ 07430
Mar 08, 2007 Providing focal length of 750 mm, SPECTRO ARCOS Inductively Coupled Plasma-Optical Emission Spectrometer utilizes 32 linear CCD detectors in Paschen-Runge mount ORCA for simultaneous recording of wavelengths from 130-770 nm. Generator uses tube with max input power of 5 kW. Low-temperature ceramic tube is forced air cooled by internal ventilation system, eliminating need for liquid coolants. In time resolution mode, sampling frequencies up to 10 measurements/sec can be achieved.

X-Ray Fluorescence Analyzer includes control software.

AMETEK Spectro Analytical Instruments Inc.    Mahwah, NJ 07430
Mar 08, 2007 SPECTRO iQ II features Silicon Drift Detector unit derived from SPECTRO XEPOS XRF, as well as software control interface allowing addition of optional touch-screen computer and structure menus enabling non-technical personnel to start, monitor, evaluate, and document analytical processes. It uses polarized excitation to perform multi-elemental analysis of solid, powder, and liquid samples for process control.

Spectrometer includes arc excitation ignition.

AMETEK Spectro Analytical Instruments Inc.    Mahwah, NJ 07430
Jan 05, 2007 Comprised of optic, readout system, power distribution, rechargeable battery, and cleaning system, hand-held iSORT provides on-site identification and analysis of iron, nickel, titanium, aluminum, copper, and cobalt metals without manual operator intervention. Intelligent ICAL calibration software controls instrument status independently from external influences. Applications include incoming quality control, material testing in production, and material failure analysis.