Latest New Product News from Schurter, Inc.
Compact Fuses provide primary protection of 3-phase systems.Schurter, Inc. Santa Rosa, CA 95403
Mar 21, 2014 Providing 1,500 A breaking capacity at 500 Vac, Series SHF 6.3x32 safeguards electronic systems and operators in event of catastrophic short circuit incident. Units are available in 10 current ratings from 1–8 A with time-lag characteristic according to UL 248-14. Operating from -40 to +85°C, RoHS-compliant fuses are suited for HVAC systems, PV systems, frequency converters, and power electronics. Units are available with panel or board mount clips and holders as well as pigtail leads.
SMD Fuses offer breaking capacity of 1,500 A.Schurter, Inc. Santa Rosa, CA 95403
Mar 04, 2014 Offering total of 19 current ratings from 160 mA to 10 A at voltages up to 277 Vac and 250 Vdc, UMT-H Series with time-lag characteristic is capable of providing reliable overcurrent protection while protecting against short circuits up to 1,500 A at rated voltage. Series is suited for primary protection of power supply units as well as protection of single phase industrial appliances, including devices required to meet explosion protection standards according to IEC 60079-11.
Cord Retaining System is available for IEC C8 appliance inlets.Schurter, Inc. Santa Rosa, CA 95403
Dec 18, 2013 Requiring one screw for fastening to panel, cord retention system features retaining clip for IEC C8 inlets and mating cord sets. Clips fit SCHURTER series 2576 flange mount and 2578 snap in mount inlets. System is offered as complete kit, including retainer clip, inlet, and power supply cord. Designed and tested to achieve 200 N retention force with SCHURTER C8 inlets and mating cord, clip is also available separately for retrofitting.
Power Connector is compatible with V-Lock cord sets.Schurter, Inc. Santa Rosa, CA 95403
Dec 04, 2013 To prevent unintended disconnection of power from equipment, KEA series power entry module mates with V-Lock cord sets. No additional hardware is required to install cord retaining system; cord set safely latches into notch in plastic housing and is removed by depressing latch. Suited for medical devices as well as IT and audio equipment, solution features C14 inlet, 1- or 2-pole fuseholder for 5 x 20 mm fuses, 4.8 x 0.8 mm quick-connect or PCB terminals, and screw-on or snap-in mounting.
Shock-Safe Fuseholders are UL rated up to 16 A at 400 Vac.Schurter, Inc. Santa Rosa, CA 95403
Nov 27, 2013 Offering 7 mounting options, FPG series accepts 5 x 20 mm fuses. Thermoplastic version, also available, meets requirements of IEC 60335-1 edition 4.0 for appliances in unattended use. Available with IP40 or IP67 seal protection for 5 x 20 mm fuses with front and rear panel mounting and either vertical or horizontal PCB mounting, products come with fuse carriers and slotted or finger grip caps. Terminal connections are made with quick-connect, solder, and PCB pins.
Seal Kit gives cord connector/inlet connection IP54 protection.Schurter, Inc. Santa Rosa, CA 95403
Sep 17, 2013 Available for 5707 series power entry module, seal kit provides IP54 rating between inlet and cord connector as to prevent dust or splashing water from entering between them when equipment is plugged in. Independent testing laboratories have examined and confirmed reliability of sealing kit according to IEC 60529. To ensure tightness of IP54 with these sealed versions in actual use, safety bracket or retaining bail included in kit must be used to secure cord set to equipment.
EMC Filter rids noise in high-power inverters.Schurter, Inc. Santa Rosa, CA 95403
Jul 05, 2013 With rated current ranging from 150–2,500 A at 520 or 760 V, FMCC SOL is designed for high attenuation of electromagnetic interference in 3-phase systems. UL-approved unit complements existing FMER SOL DC filter for use in inverters where both AC and DC lines require filtering, such as those used for photovoltaic and wind harvesting systems. FMCC SOL is also suited for solo use in 3-phase grid-connected industrial and commercial systems.
SMD Fuse offers 14 rated currents from 500 mA to 10 A.Schurter, Inc. Santa Rosa, CA 95403
Jul 05, 2013 Suitable for voltages up to 250 Vac and 125 Vdc, quick-acting Model UMF 250 provides over current and short circuit protection in primary and secondary circuits. Unit features breaking capacity up to 200 A at rated voltage. Measuring 3 x 10.1 mm, surface mount fuse offers alternative to traditional 5 x 20 mm cartridge fuses. Halogen-free device is RoHS-compliant and suited for power supplies, medical and lighting equipment as well as electronic devices in home and industry.
SMD Fuse offers 1,500 A breaking capacity at 277 Vac/250 Vdc.Schurter, Inc. Santa Rosa, CA 95403
Jun 18, 2013 Designed for applications where cartridge fuse is used, UMT-H Universal Modular Fuse is offered with 6 rated currents from 160 mA to 2 A. Dimensions of 5.3 x 16 mm help conserve board space compared to 5 x 20 mm cartridge fuses to allow for downsizing, while position of device markings makes key information – approvals, current rating, and voltages – immediately available. Spacing between end caps (>10 mm) meets IEC 60079-11 for applications requiring components for explosion protection.
IEC Appliance Inlet secures power components to PCBs.Schurter, Inc. Santa Rosa, CA 95403
May 21, 2013 Compact GSP4, IEC C20 appliance inlet features PCB terminals for L, N, and E and 6.3 x 0.8 mm quick connect or solder tab for additional grounding to chassis. Unit is snapped in or screwed on to PCB before soldering. Included stabilizing posts absorb withdrawal and insertion force. Unit carries ENEC and CCC approvals for 16A / 250 Vac, is UL approved for 20 A/250 Vac, and is CSA approved for 18 A/250 Vac while fulfilling glow-wire test requirements for equipment according to IEC 60335-1.
Click below for more Product News from Schurter, Inc.
Other Company News From Schurter, Inc.
Nov 06, 2013
Compact Power Connector Is Now V-Lock Compatible
Sep 13, 2013
Components Approved for Use in Unattended Household Appliances
Feb 18, 2013
Versatile Power Entry Module Now Offered with Custom Wires
May 04, 2011
Schurter Touts Broad Range of Standard EMC Filters
Aug 06, 2008
The UMT 250 Offers More Versatility with Extended Current Ratings
Feb 19, 2008
Piezo Switches Operate in Hot and Ice Cold Conditions
|Home | My ThomasNet News® | Industry Market Trends® | Submit Release | Advertise | Contact News | About Us|
Brought to you by Thomasnet.com
Browse ThomasNet Directory|