Signal Conditioner provides analog and RS-485 outputs.

Macro Sensors    Pennsauken, NJ 08110 1334
May 16, 2013 Compatible with most LVDT and RVDT linear position sensors, EAZY-CAL LVC 4000 digitally communicates with up to 16 devices simultaneously and can be connected together in master/slave configuration for multiple channel applications. DIN rail-mount unit features digital calibration using 2 pushbutton front panel controls to set zero and full scale. To facilitate LVDT linear position sensor operation in extreme environments, signal conditioners can be remotely located by up to 100+ ft.

LVDT Linear Position Sensors target power generation markets.

Macro Sensors    Pennsauken, NJ 08110 1334
Nov 12, 2012 UL/ULC listed and ATEX-approved, HLR 750 Series is suitable for gas turbine environments. Sensors are constructed entirely of stainless steel and are hermetically sealed for resistance against environmental elements. With electronics remotely located, AC-operated units can withstand temperature of 300°F on turbine. Available in full-scale measurement ranges from ±1 in. to ±10 in., sensors offer repeatability better than 0.01% of FS and non-linearity of less than 0.25% of full range output.

LVDT Position Sensors perform in harsh environments.

Macro Sensors    Pennsauken, NJ 08110 1334
Apr 17, 2012 Environmentally robust CD 375 Series LVDT position sensors operate in temperatures of -65 to +400°F and in pressures up to 35 kpsi. Sensor case is vented to equalize pressure inside and outside LVDT linear position sensor. Measuring 3/8 in diameter, AC-operated sensors are designed for dynamic measurement such as valve and pneumatic cylinder positionings. They are available in full-scale measurement ranges from ±0.025 to ±1.0 in.

LVDT-Based Gaging Probes offer precise measuring capabilities.

Macro Sensors    Pennsauken, NJ 08110 1334
Feb 28, 2012 Available in 3 standard ranges of +0.020, +0.100, and +0.200 in., BB Series LVDT dimensional gaging probes combine AC-LVDT with linear ball bearing assembly to reduce radial play and core skewing, resulting in repeatability of 0.000006 in. Spring-loaded LVDTs feature rubber bellows covering probe shaft to prevent contaminants from entering into bearing. Probes are available in 4 models including full bridge, half bridge, pneumatic and soft touch.

LVDT Position Sensors ensure quality control in steel mills.

Macro Sensors    Pennsauken, NJ 08110 1334
Jan 20, 2012 Environmentally sealed to IP68 standard, rated to 185°F, and protected against dust ingress, Steel Mill Position Sensors monitor position of milling frames that support rollers during hot rolling process, ensuring frames do not deform or shift. Radial configuration with rod ends facilitates installation, while pre-calibrated on-board electronics eliminate need to configure signal conditioners. Available in ±0.015 to ±10.0 in. ranges, non-contact sensors provide 0-10 V, 4-20 mA, and ±10 V outputs.

LVDT Linear Position Sensor operates in hazardous locations.

Macro Sensors    Pennsauken, NJ 08110 1334
Nov 07, 2011 Constructed of stainless steel and rated to 212°F, intrinsically safe HLR series is UL-/ULC-listed for hazardous locations Class I, Division 1, Groups A/B/C/D and Class I, Zone 2. Contactless position measurement accommodates critical applications in hostile environments of gas/steam turbine plants, chemical process plants, and paper mills. Offering measurement ranges from ±1 to ±10 in. FS, series delivers repeatability better than 0.01% FS typ and non-linearity of less than 0.25% FRO.

Sensor Package suits linear position gaging applications.

Macro Sensors    Pennsauken, NJ 08110 1334
Jun 13, 2011 Combining spring-loaded, AC-operated LVDT position sensors with EAZY-CAL(TM) Mini-Module LVDT Signal Conditioner, EAZY-GAGE Bundle provides fully calibrated and complete linear position gaging system ready for immediate operation. Package can be specified with variety of GHSA/R 750 Series position sensors with stroke ranges from 0.10-4.00 in. Operating on nominal 15-30 Vdc power input, DIN rail-mount signal conditioner provides 0-10 Vdc or 4-20 mA output and can be remotely located by up to 100+ ft.

LVDT Signal Conditioners include 4-20 mA output model.

Macro Sensors    Pennsauken, NJ 08110 1334
Apr 20, 2011 While alternatively available with 0-10 Vdc output, EAZY-CAL(TM) MMX Series Mini-Module LVDT Signal Conditioner with 4-20 mA output supports process control and factory automation applications with extended cable run requirements. Calibration can be accomplished in seconds via 2 front panel pushbuttons. Measuring 2.77 x 3.35 x 0.7 in., single-channel modules support most manufacturers' LVDT position sensors with plug-and-play compatibility and can be remotely located up to 100+ ft.

Spring Loaded Linear Position Sensors suit general industrial use.

Macro Sensors    Pennsauken, NJ 08110 1334
Mar 01, 2011 Constructed of stainless steel, GPA Series Spring-Loaded Linear Position Sensors are available in ranges from ±0.050 to ±2.00 in. with maximum linearity error of ±0.25% FRO. They include ½-20 UNF 2A thread on housing, allowing OEM to install it into mating threaded part or use two hex nuts for bulkhead mounting. Electrical interface is via 3 ft long Teflon® insulated/shielded cable and units provide various analog or digital outputs when connected to any standard LVDT signal conditioner.

Linear Position Sensors utilize magnetostrictive technology.

Macro Sensors    Pennsauken, NJ 08110 1334
Jan 14, 2011 Available in ranges of 11.8-39.4 in., MLW Series of Long Stroke Position Sensors provide absolute position measurement of displacements up to 1.2 m. Units are powered by 24 Vdc and have less than ±0.25% linearity and ±0.01% repeatability over full scale with analog voltage, current, and SSI outputs. Featuring self-contained electronics, stainless steel probe, and die cast probe head with IP66 rating, transducers are suited for hydraulic cylinder and actuator feedback applications.