Open Chassis Surge Protection Modules target OEM applications.

Zero Surge Inc.    Frenchtown, NJ 08825
Feb 28, 2013 Available in 5, 8, 15, and 20 A models, OEM surge protection modules can be specified in open frame and DIN rail mounts. Spectrum WVR® wide voltage range technology senses and suppresses power line surges over voltage range of 85-175 V, while TSC® total surge cancellation technology incorporates WVR and adds value by canceling residual surge for zero let-through energy. Modules inherently remove EMI/RFI noise interference from power lines that could disrupt signals and degrade equipment.

Surge Suppression Unit suits emergency management centers.

Zero Surge Inc.    Frenchtown, NJ 08825
Dec 12, 2012 Integrating four 15 A NEMA5 and four 20 A NEMA5 always-on receptacles, 1U rackmount Model 8R-1U-20W-I delivers 24/7 failure-free service and continuously shields equipment and sensitive electronics from potentially damaging surges. Patented WVR®  Wide Voltage Range filter technology effectively senses and suppresses surges over voltage range of 85–175 V and will remove any EMI/RFI fluctuations from power lines that could disrupt signals and degrade equipment over time.

Surge Protectors support multiple rooms or outlets.

Zero Surge Inc.    Frenchtown, NJ 08825
Dec 05, 2012 Featuring failure-free design, TRU-BLOCK™ Series includes panel-mount versions for one or more rooms and either 20 A/120 V or 20 A/240 V applications, and plug-in versions with 15 A capacity for up to 8 outlets. Units minimize let-through voltage levels of 330 V or less to safeguard sensitive electronics and will suppress surge current, voltage, and duration over voltage range of 175 V MCOV. In addition, products will remove EMI/RFI noise from power lines that could adversely affect equipment.

Surge Suppression Filter protects data center operations.

Zero Surge Inc.    Frenchtown, NJ 08825
Sep 04, 2012 With integrated Total Surge Cancellation (TSC) technology, power quality filters (Model IR-2U-30T-120) shield uninterruptible power supplies (UPSs) as well as connected rack-mounted equipment and sensitive electronics from dangerously high and damaging surge energy. In addition to delivering failure-free service during surges to eliminate potential for loss or corruption of critical stored data, products remove any EMI/RFI fluctuations from power lines.

Branch Circuit Surge Protectors cover wide voltage range.

Zero Surge Inc.    Frenchtown, NJ 08825
Jul 20, 2012 Delivering surge suppression for commercial and industrial applications, FF1 Series integrates filter system to provide protection for 1 or multiple branch circuits. Spectrum WVR® filter technology senses and suppresses power line surges over 85-175 V range. Also, filters protect against noise damage by removing EMI/RFI disturbances from power line. NEMA 1 enclosures have screw cover, and 20 A versions can be supplied with flush covers for recessed mounting.

Surge Protector offers protection from Category B surges.

Zero Surge Inc.    Frenchtown, NJ 08825
Dec 15, 2006 Unlike common surge suppressors that use fixed clamping voltage components, WVR-TSC(TM) is fully dynamic and operates over entire 85-265 V range. Non-MOV filters preserve ground wire integrity, helping to eliminate interference and damage. Because WVR-TSC cancels surge voltage at output, response time, clamping voltage, suppressed voltage, and max current rating are not relevant.

Surge Protectors plug into outlet or computer.

Zero Surge Inc.    Frenchtown, NJ 08825
Oct 18, 2002 Models 2R8 and 2R8IEC are 2 receptacle, 8 A stand-alone models that protect typical computer systems. IEC model comes with IEC connector and cord, with standard 120 V plug. This allows surge protector to be plugged into standard outlet or used directly with IEC connectors. Model 2R8IEC, with optional Spectrum WVRâ„¢ (wide voltage range) technology, operates from 85 to 265 V and allows unit to be used for 120, 208, and 240 V applications.

Surge Protection works during brownouts.

Zero Surge Inc.    Frenchtown, NJ 08825
Aug 05, 2002 Unlike fixed clamping level devices which do not activate during brownouts, Spectrum WVRâ„¢ features dynamic clamp for instantaneous response to surge current and voltage. This provides protection against surge damage during brownout conditions.

Surge Suppressor fits on DIN rail.

Zero Surge Inc.    Frenchtown, NJ 08825
Apr 29, 2002 Surge suppressor, for 120 and 240 V applications, fits standard 32 and 35 mm DIN rails, and is also avaialable in panel-mount version for control panel or other applications. Surge supressor has screw terminals and can be ordered with Spectrum WVR(TM) wide voltage range technology, which will operate from 85 to 265V. Product is X10 carrier-current compatible.

Power Distribution Unit offers series mode technology.

Zero Surge Inc.    Frenchtown, NJ 08825
Jan 07, 2002 Available as 19 in. rack mount or 17 in. modular, PDU features total of 10 outlets, 4 sequentially switched, 4 normally switched, and 2 always on. It includes switch selectable delay, power failure reset latch, remote control capabilities, and daisy chaining. Low voltage shut-down function will automatically shut down in opposite sequence of start-up if voltage drops below 95 V. 15 and 20 A models are available.