Rough Face Milling Cutter features multi-edge design.

Sandvik Coromant Co.    Fair Lawn, NJ 07410
Mar 06, 2013 Available in 4-10 in. dia, CoroMill 357 is suitable for roughing and cubing in steel and cast iron on ISO 50 and larger machines. Double-sided, pentagonal inserts are housed in shim-protected tip seats, and cutter body has insert clamping system that facilitates and accelerates insert indexing. Taking depth of cut up to 0.394 in. with feed per tooth up to 0.0276 in./z, cutters feature support faces radially, axially, and on base that prevent deformation and ensure consistent performance.

Precision Hydraulic Chuck serves milling, drilling operations.

Sandvik Coromant Co.    Fair Lawn, NJ 07410
Feb 27, 2013 Available in pencil, slender, or heavy-duty design, CoroChuck™ 930 is balanced according to DIN 69888. Brazed membrane, maximizing secure clamping with 2 supports on each side, promotes precision as well as pull-out security, while design ensures optimal torque transmission. Based on hydraulic tool clamping system, chuck can be tightened or released with dedicated torque wrench and holds tolerances within microns. Precision run-out can be measured at less than 157 µin. at 2.5 x DC.

Exchangeable Head Milling System has internal coolant holes.

Sandvik Coromant Co.    Fair Lawn, NJ 07410
Feb 06, 2013 With precisely positioned internal coolant holes that optimize effect of coolant jet, CoroMill 316® can be applied for high-feed face milling, slot milling, helical interpolation, shoulder milling, profile milling, and chamfer milling of components in material groups from ISO P to ISO S. System allows machine shops to switch between various operations, such as cutter type, radius variation, teeth frequency, geometry, and grade. End mills are also suitable for 5-axis milling of flanks.

High-Feed Milling Cutter features 5-edge design.

Sandvik Coromant Co.    Fair Lawn, NJ 07410
Jan 25, 2013 Intended for roughing to semi-finishing, CoroMill 419 is available in 1.25–4 in. dia range with various insert grades and geometries to accommodate needs of most materials and applications. Through coolant on all cutters promotes wet machining efficiency, while compressed air cooling option aids chip evacuation in deep cavity milling and helical interpolation. Features ensure productivity in applications requiring light cutting action and extended tool life.

Solid Carbide Reamers come in spiral and straight flute designs.

Sandvik Coromant Co.    Fair Lawn, NJ 07410
Dec 17, 2012 With dedicated geometries and internal coolant, CoroReamer 435 is suitable for wide range of materials, while CoroReamer 835 is intended for steel and stainless steel materials. Reamers are available in spiral flute design for through holes and straight flute design for blind holes. Supplied in standard diameter range of 0.156–0.787 in., with achievable tolerance of IT7, reamers offer solution when high surface quality finish and close tolerances are required.

Multi-Material End Mills suit roughing, finishing, and profiling.

Sandvik Coromant Co.    Fair Lawn, NJ 07410
Nov 07, 2012 Available in variety of component sizes and shapes, Multi-Material End Mills minimize requirement to change tools for every different operation. Units feature reinforced end teeth to avoid premature chipping, cylindrical land width, and flat relief for maximum stability. Coating on insert grade GC1630 is extremely resistant to wear and is especially suitable for roughing and finishing dry or wet.

Micro-Grained Carbide Drill offers application versatility.

Sandvik Coromant Co.    Fair Lawn, NJ 07410
Oct 26, 2012 Available with internal and external coolant, CoroDrill 460–XM drill works with diverse materials. Coating has finishing treatment to reduce coefficient of friction, and web design promotes cross-sectional strength that, combined with flute volume, enhances chip evacuation. Point angle of 140° is suited for multi-application drilling, with optimized centering capabilities and low-thrust force design. Drill comes in 0.118–0.787 in. dia and drill lengths 2X–5X drill diameter.

Exchangeable Tip Drill suits steel and cast iron applications.

Sandvik Coromant Co.    Fair Lawn, NJ 07410
Oct 10, 2012 Able to be tailored to optimize applications via diameter (0.472–1.020 in.), step, and length (3X, 5X, and 8X drill diameter) options, CoroDrill 870 features secure interface between drill body and tip that ensures reliability and precision. Tip change procedure helps maximize active machining time, while cutting edge geometries and grades increase penetration rates, provide safe cutting process, help maintain chip control, and promote extended tool life.

Light Cutting Insert enhances gear milling operations.

Sandvik Coromant Co.    Fair Lawn, NJ 07410
Jun 11, 2012 Suited for smaller gear milling machines, including CoroMill® 170 precision gear milling cutter, -PL geometry flank insert utilizes grade GC1030 and features positive chip breaker that minimizes unwanted cutting forces and vibration. This lends to reduced power consumption or ability to run accelerated and extended cycles. Working in steel application area, typ operations include rough milling of internal/external gears as well as machining of gear wheels in 12-22 module range.

Solid Carbide Micro Drill produces holes from 0.073-0.116 in. in diameter.

Sandvik Coromant Co.    Fair Lawn, NJ 07410
May 29, 2012 Featuring thin TiAlN coating that helps retain cutting edge geometry, CoroDrill 862 produces holes in steel, stainless steel, cast iron, and aluminum. Post treatment, combined with specially designed point geometry, minimizes thrust forces, while Advanced Chip Management flute geometry helps evacuate chips. Available in drill lengths of 8-12 x D, CoroDrill 862 achieves hole tolerance of IT8-IT9. Internal coolant holes deliver coolant directly to tip of drill, even at deep drilling depths.