Latest New Product News from Master Bond, Inc.
Two Part, Flame-Retardant Epoxy cures at room temperature.Master Bond, Inc. Hackensack, NJ 07601
May 02, 2013 Compliant with UL 94V-0 specification, EP21FRNS-2 epoxy has non-halogen filler and suits potting, encapsulation, and casting applications. Moderate viscosity epoxy features 1:1 mix ratio by weight and withstands exposure to chemicals, water, fuels, lubricants, and acids. Serviceable over -51 to +90°C temperature range, product bonds metals, glass, ceramics, and many plastics. It is available in ½ pint, pint, quart, and 1 and 5 gal kits and in syringes, bubble packs, and gun dispensers.
High-Strength Epoxy meets NASA low outgassing specifications.Master Bond, Inc. Hackensack, NJ 07601
Jul 26, 2012 Able to adhere to metals, glass, ceramics, and plastics and withstand temperatures from 4K to +400°F, Supreme 10HT exhibits tensile shear strength in excess of 3,600 psi and T-peel strength up to 30 pli. Flexibility and toughness foster resistance to thermal cycling, mechanical shock, vibration, and stress fatigue cracking. Able to withstand exposure to variety of chemicals, single-part system eliminates mixing and cures in 60-75 minutes at 250°F. Cured epoxy acts as electrical insulator.
One-Part Epoxy adheres to metal and ceramics.Master Bond, Inc. Hackensack, NJ 07601
Feb 24, 2012 Primarily used for testing adhesion or cohesive strength of flame sprayed coatings as per ASTM C633 specification, Master Bond EP15 features tensile strength exceeding 12,000 psi at room temperature and viscosity of 40,000-65,000 cps. Chemical-resistant product is serviceable from -60 to 250°F and withstands thermal cycling. Applied with brush, paint roller, or spatula, 100% reactive system cures in 60-90 minutes at 300-350°F with minimal shrinkage.
Epoxy Adhesive/Sealant meets USP Class VI requirements.Master Bond, Inc. Hackensack, NJ 07601
Jan 13, 2012 Suited for medical applications, silver-filled EP3HTSMED is 100% reactive with tensile shear strength exceeding 1,000 psi and volume resistivity less than 0.001 Wcm. Thixotropic paste requires no mixing and needs only contact pressure during heat cure of 20-40 min at 300°F or 40-90 min at 250°F. Serviceable over temperature range of -60 to 400°F, electrically conductive product is resistant to severe thermal cycling as well as water, fuels, oil, and most organic solvents.
UV Curable Epoxy exhibits strength, chemical resistance.Master Bond, Inc. Hackensack, NJ 07601
Nov 22, 2011 Formulated for bonding, sealing, and coating, UV16 single-component, no-mix system cures in 1 min or less at room temperature with commercial UV light sources. This 100% reactive epoxy, uninhibited by oxygen, does not release any solvents or volatiles during cure. Cured in thicknesses up to 0.125 in. with 2%-3% shrinkage rate, solution delivers tensile strength exceeding 4,100 psi and Shore D hardness greater than 75. Product has viscosity of 200-400 cps and adheres to array of substrates.
Low Thermal Expansion Epoxy passes NASA low outgassing tests.Master Bond, Inc. Hackensack, NJ 07601
Apr 20, 2011 Formulated with blend of polymeric and inorganic materials, 100% reactive EP30LTE-LO is used for bonding, sealing, casting, and coating applications. This 2-component epoxy exhibits dimensional stability and is serviceable over -60 to +250°F range. CTE is 12x10-6 in./in./°C, and shrinkage rate is less than 0.0002 in./in. Producing bonds with tensile strength over 5,000 psi, electrically insulative product bonds to metals, glass, ceramics, wood, vulcanized rubbers, and plastics.
Flexible Epoxy withstands cryogenic conditions.Master Bond, Inc. Hackensack, NJ 07601
Mar 25, 2011 Serviceable over wide range of 4 K to 250°F, Polymer System EP37-3FLF cures at room temperature in 2-3 days or faster at elevated temperatures. Optically clear, 2-component epoxy offers non-critical 1:1 mix ratio and low mixed viscosity of 1,400-1,500 cps. With bond shear strength exceeding 2,000 psi and T-peel strength of 25 pli, flexible epoxy bonds to metals, glass, ceramics, rubber, and many plastics, and may serve as potting, encapsulating, and casting system.
Chemically Resistant Epoxy withstands one year in sulfuric acid.Master Bond, Inc. Hackensack, NJ 07601
Mar 03, 2011 Used for coating, lining, bonding, or sealing, EP21AR withstand acidic environments - including immersion in 96-98% sulfuric acid and 36% hydrochloric acid for over one year. This 2-component epoxy, with dielectric strength of 400 V/mil, also acts as electrical insulator and is serviceable from -60 to +275°F. It produces abrasion-resistant bonds with tensile strength over 10,000 psi, shear strength exceeding 2,700 psi, and compressive strength greater than 14,000 psi at 75°F.
Structural Epoxy Adhesive resists high temperatures.Master Bond, Inc. Hackensack, NJ 07601
Jan 20, 2011 Formulated for structural applications in extreme environments with temperatures from -80 to +425°F, Master Bond Supreme 33 bonds to metals, glass, ceramics, wood, vulcanized rubbers, and many plastics. Toughened 2-component adhesive resists thermal cycling, thermal shock, and impact as well as water, oil, and many organic solvents. Designed to cure at room temperature in 48-72 hr, 100% reactive epoxy achieves shear strength over 2,500 psi and tensile shear strength greater than 7,500 psi.
Epoxy Adhesive features single-component, non-drip formula.Master Bond, Inc. Hackensack, NJ 07601
Jan 14, 2011 Designed to bond to similar and dissimilar substrates, Master Bond EP13ND requires no mixing, has unlimited working life at room temperature, and features service operating temperature of -60 to 450°F. Product cures at temperatures of 300-350°F in 60-90 minutes. Upon cure, adhesive obtains tensile shear strengths in excess of 3,500 psi at 75°F. Formula is 100% reactive, does not contain solvents or diluents, and offers resistance to fuels, acids, bases, oils, and many solvents.
Click below for more Product News from Master Bond, Inc.
Other Company News From Master Bond, Inc.
May 14, 2013
Addition Cured Silicone Meets USP Class VI and ISO 10993-5 Specifications for Biocompatibility and Cytoxicity
Jan 18, 2013
Chemical Resistant, High Strength Two Component Epoxy Withstands Elevated Temperatures
Oct 24, 2012
Dimensionally Stable Epoxy Based UV Curable System with High Temperature Resistance
Jul 22, 2012
"High Strength, One Component Epoxy Meets NASA Low Outgassing Specifications
Jul 14, 2011
Medical Grade Epoxy Adhesive Withstands High Temperatures and Repeated Sterilization
Feb 08, 2011
Silver Conductive Epoxy Meets NASA Low Outgassing Standards
Sep 07, 2010
Room Temperature Curing Flexibilized Epoxy Combines High Strength and Toughness with Chemical and Abrasion Resistance
Aug 12, 2010
Thermally Conductive, Low Viscosity Epoxy Features Cryogenic Serviceability
Jun 08, 2010
One Part High Strength Epoxy With High Thermal Conductivity Meets NASA Low Outgassing Specifications
May 06, 2010
Single Component Snap Cure Epoxy has Outstanding Electrical Properties and Chemical Resistance
Mar 27, 2010
Adhesive for Fiberglass Remarkably Resistant to High Temperature
Oct 29, 2009
UV Curable Compound with Superior Gap Filling Properties
Sep 10, 2009
Low Exotherm Potting Compound Specially Designed for Heat Sensitive Components
May 20, 2009
Revolutionary Polyethylene Adhesive Requires No Pretreatment
Apr 22, 2009
Radio-Opaque Medical Adhesive in the Service of Radiographic Imaging
Feb 26, 2009
A Versatile Aerospace Epoxy Conquers Cryogenic Wind Tunnel
Aug 19, 2008
New Cost Effective, High Conductivity Epoxy
Dec 26, 2007
Cost Effective Anti-Static Electrically Conductive Latex Coating
Dec 25, 2006
Thermally Conductive Epoxy is Exceptionally Flexible
|Home | My ThomasNet News® | Industry Market Trends® | Submit Release | Advertise | Contact News | About Us|
Brought to you by Thomasnet.com
Browse ThomasNet Directory|