Saw Blade cuts plywood and plywood veneers.

Forrest Manufacturing Co., Inc.    Clifton, NJ 07014
Aug 04, 2011 Made from corrosion-resistant C-4 micrograin carbide, Ply Veneer Worker Blade delivers rip and cross cuts of 2-sided plywood, finished or unfinished. It also provides finish-quality cross cuts on hardwood laminated sheet products and natural wood of all types. Measuring 10 in. in diameter with 10° hook and 70 teeth, blade performs flawless cuts without splintering or fuzz and without chip-outs on either top or bottom surfaces.

Woodworking Blades deliver clean, quiet cuts.

Forrest Manufacturing Co., Inc.    Clifton, NJ 07014
Mar 18, 2011 Suited for use with most table, circular, and panel saws, 12 in. dia Woodworker II blades are available with 1 or 5/8 in. bore or can be customized to end-user specifications. Products are engineered from corrosion-resistant C-4 micrograin carbide and have 1/8 in. kerf. Suited for making clean cross cuts, 48-tooth design facilitates feeding, and sharp teeth points have 25° bevel. Hand-straightened for perfect flatness, blades have side runout of ±.001 in.

Compound Miter Saw Blade features 7/64 in. kerf.

Forrest Manufacturing Co., Inc.    Clifton, NJ 07014
Feb 18, 2011 Designed specifically for Kapex KS 120 Sliding Compound Miter Saw, Signature Line Chop Master Blade features 10.2362 in. diameter and 1.1811 in. bore. Unit is made with corrosion-resistant C-4 micro-grain carbide, 90 carbide teeth, and angled carbide points. Designed to run cool and cut smoothly at any angle without bottom splintering, side scoring, or vibration, blade can produce delicate pre-finished crown molding, picture frame molding, and composite molding.

Woodworking Blade creates quality mortise, tenon joints.

Forrest Manufacturing Co., Inc.    Clifton, NJ 07014
Dec 02, 2010 Intended for use by advanced woodworkers, Duraline Tenoning Blade facilitates and accelerates production of clean, reliable mortise and tenon joints. Tenon can be created in 2 steps, and perimeter concentricity and side runout are rated at ±.001. Suited for use with most all types of tenoning jigs, product is engineered from corrosion-resistant C-4 micrograin carbide and has 60 teeth as well as No. 6 grind with alternate top bevel/raker.

Woodworking Saw Blades suit plunge cut circular saws.

Forrest Manufacturing Co., Inc.    Clifton, NJ 07014
Jul 30, 2010 Custom WoodWorker I Blades are available as 20 mm bore/160 mm blade for Festool TS 55 EQ Model saw and as 30 mm bore/210 mm blade for TS 75 EQ Model saw. Blades deliver high quality cross-cuts with both hardwoods and softwoods, eliminating problem of bottom splintering when cross-cutting ply veneers of oak and birch. Blades also feature optimal perimeter concentricity and side runout of ±.001 in., along with clearances on blade teeth that eliminate side scoring.

Carbide 12 in. Saw Blade has 90-tooth, cool-running design.

Forrest Manufacturing Co., Inc.    Clifton, NJ 07014
Jun 07, 2010 Featuring 90 teeth, 12 in. diameter, and 5/8 in. center hole, Signature Line Chop Master blade (Catalog No. CM12905115A) may be used on any 12 in. sliding compound miter saw, chop saw, or radial arm saw. Cool running design enables quiet, smooth cuts at any angle without bottom splintering, side scoring, or vibration. Made with corrosion-resistant C-4 micro-grain carbide, blade features angled points that facilitate penetration into wood and composites.

Saw Blade minimizes woodworking waste.

Forrest Manufacturing Co., Inc.    Clifton, NJ 07014
Apr 28, 2010 Designed to work with lighter duty saws, Ultra Thin 080 Woodworker II has .080 in. kerf and .060 in. body for minimal resistance when cutting. Blade thinness, coupled with alternate top bevel (ATB) grind, allows carbide-tipped teeth to cut with scoring action, minimizing resistance and tearout while promoting precision. Engineered from corrosion-resistant C-4 micrograin carbide, hand-straightened blade has 10 in. dia, 5/8 in. bore, 40 teeth, and 20° positive hook.

Saw Blades fit trim and plunge saws.

Forrest Manufacturing Co., Inc.    Clifton, NJ 07014
Mar 09, 2010 Made of corrosion-resistant C-4 micrograin carbide, Woodworker II and Woodworker I Blades are 40-tooth, alternate top bevel blades available in 4 3/8, 4 ½, and 5 3/8 in. diameters with 20 mm, 3/8 in., and 10 mm bores, respectively, to fit Makita®, Porter-Cable, and DeWalt® skill saws. Blades have 20° hook, so each tooth leans forward to help pull wood into blade. Alternate top bevel blades with 5° hook, designed specifically for Festool plunge saws, are also available.

Saw Blade offers optimized cross-cutting capability.

Forrest Manufacturing Co., Inc.    Clifton, NJ 07014
Oct 09, 2009 Suited for table, panel, and circular saws, 1048 Woodworker II features 48 teeth, 20° face hook, and 25° bevel, making it suited for cross-cutting everything from soft woods to plywood veneers. Sharp points allow blade to cleanly slice through wood fibers as it cuts across grain and to operate quietly with minimized vibration. Available in 10 in. diameter with 1/8 in. kerf, and 5/8 in. bore, blade can also produce smooth rips without side scoring or splintering.

Saw Blade features 90 teeth and optimized angles.

Forrest Manufacturing Co., Inc.    Clifton, NJ 07014
Jul 14, 2009 Available in 10 and 12 in. diameters with 5/8 or 1 in. center holes, Signature Line Chop Master blade cuts any wood or composite material and has angled carbide points for minimized cutting pressure without bottom splintering, side scoring, or vibration. Unit features corrosion-resistant C-4 micrograin carbide saw blade tips, optimal perimeter concentricity, minimal noise, and side runout to ±.001 in. as well as -5° hook to control feed rate.