Voltage Measurement Circuits feature simultaneous sampling.

Maxim Integrated Products    Sunnyvale, CA 94086
May 06, 2013 Model MAX14920, 12-channel analog front-end ICs are available in 64-pin, 10 mm² TQFP package and MAX14921, 16-channel units come in 80-pin, 12 mm² TQFP. Both operate over -40 to +85°C temperature range. Maximizing accuracy of cell voltage readings through common-mode level shifting and high-precision amplifier, ICs provide cell voltage measurements of up to ±0.5 mV and manage up to 16 battery cell packs. Units help lengthen life of rechargeable Li-Ion battery packs in UPS systems and more.

DAB Receiver enables SDR via RF to Bits® architecture.

Maxim Integrated Products    Sunnyvale, CA 94086
Apr 22, 2013 Supplied in 40-pin, 6 x 6 mm TQFN package, MAX2173 integrates radio tuner, ADC, and digital filtering. This RF to Bits tuner, specified over -40 to +85°C range for digital audio broadcast (DAB) applications in automobiles and other mobile DAB/FM products, uses digital I²S output to interface directly to DSPs. Performance and flexible RF front-end supports DAB, FM, and Terrestrial Digital Multimedia Broadcast (T-DMB) applications in FM, VHF band-III, and L-band frequency bands.

Battery Fuel Gauge constantly updates remaining battery status.

Maxim Integrated Products    Sunnyvale, CA 94086
Mar 19, 2013 Available in 0.4 mm pitch, 9-bump WLP, Model MAX17050 integrates coulomb counting with ModelGauge technology, automatically compensating for aging, temperature, and discharge rate. ModelGauge™ m3 algorithm makes continuous micro corrections and eliminates sudden jumps in battery's state of charge, enabling users to trust resulting battery information, including health and maximum battery usage. Device is suited for smartphones, tablets, mobile radios, and portable medical/fitness equipment.

RGB Laser Driver targets automotive projectors.

Maxim Integrated Products    Sunnyvale, CA 94086
Jan 23, 2013 With less than 1 W total module power, 8-bit Model MAX3601 drives 3 RGB lasers for pico laser projectors in automobiles. IC enables lasers to project bright, vivid images onto heads-up displays to alert driver while optimizing safety. With 80 mW bias current, device achieves maximum light output with optimal power efficiency. MAX3601 is available in 3 x 3.5 mm, 42-bump WLP and 5 x 5 mm, 40-pin TQFN package, which is specified over -40 to +105°C temperature range.

Energy-Measurement Processors provide utility-grade sensing.

Maxim Integrated Products    Sunnyvale, CA 94086
Jan 21, 2013 Featuring fully autonomous operation, single-phase Models 78M6610+PSU/78M6610+LMU provide utility-grade sensing and diagnostics for existing designs. Internal RC oscillator and low baud rate serial interface eliminate need for crystals. Model 78M6610+PSU is designed for real-time monitoring of data centers, servers, and telecom/data equipment, while Model 78M6610+LMU offers general-purpose solution for applications such as white-good appliances, smart plugs, EV chargers, and solar inverters.

Li-Ion Battery Fuel Gauge maximizes battery runtime.

Maxim Integrated Products    Sunnyvale, CA 94086
Jan 03, 2013 Operating at 23 µA, MAX17048 automatically detects when battery enters low-current state and switches into low-power 4 µA hibernate mode, while still providing accurate fuel gauging. ModelGauge™ algorithm provides state of charge and compensates for temperature and load variation. Available in 0.9 x 1.7 mm WLP and 2 x 2 mm TDFN packages, gauge is suitable for portable battery-powered applications, such as smartphones, wireless handsets, and mobile accessories.

Bipolar 16-bit ADCs integrate internal reference with buffer.

Maxim Integrated Products    Sunnyvale, CA 94086
Dec 14, 2012 Available in 9 mm² package, 12-pin Models MAX11166 and MAX11167 feature Beyond-the-Rails™ technology, which supports ±5 V input signal from single positive 5 V rail, eliminating need for negative power supplies. Devices communicate using SPI-compatible serial interface at 2.5, 3, 3.3, or 5 V logic levels and have sample rates of 500 ksps and 250 ksps, respectively. At 19.5 mW and 1 µA in shutdown mode, ADCs are applicable for precision measurement applications.

Authentication Chipset protects against counterfeiting.

Maxim Integrated Products    Sunnyvale, CA 94086
Dec 11, 2012 Providing secure authentication between systems and peripherals, DeepCover™ Chipset comprises DS2465 secure co-processor with integrated 1-Wire® master and DS28E15/DS28E22/DS28E25 1-Wire secure authenticators. DS2465 performs SHA-256 coprocessing to operate slave devices that provide SHA-256 authentication security. Physical tamper protection thwarts most probable security attacks at die level. By ensuring that only licensed peripherals are used with OEM equipment, chipset protects revenue stream.

Integrated MCU provides protection for financial terminals.

Maxim Integrated Products    Sunnyvale, CA 94086
Dec 05, 2012 With standards-compliant security features, DeepCover™ MAX32590 suits financial terminals and trusted devices such as multimedia-enabled, portable EFT-POS terminals. External memory encryption and integrity checking simplify system integration while promoting IP and attack protection strength. Along with ARM926 core, single-chip MCU integrates dual external memory controllers and connectivity options that include 10/100 Ethernet MAC and USB host and device controller.

Integrated DAC supports industrial test and measurement.

Maxim Integrated Products    Sunnyvale, CA 94086
Nov 19, 2012 Available in a 24-pin TSOP package, 18-bit MAX5318 integrates output and reference buffer amplifier, providing high-precision voltage source for industrial test and measurement, factory automation, and process control. Unit features fast settling time of 3 µs and ±2 LSB accuracy over -40 to +105°C temperature range. Negative supply option allows full INL and DNL performance down to 0 V.