Needle-Bonding Adhesives increased throughput via cure speed.

Dymax Corp.    Torrington, CT 06790
Jun 05, 2013 With typical cure time of 2.5 sec or less, 1400 Series LED-curable needle bonders increase production speed and throughput while promoting quality control with aid of fluorescing technology. Adhesives cure with 385 or 405 nm wavelengths, allowing design flexibility within automation process, and are available in 15 L pails. Products pass ISO 10993-5 Cytotoxicity testing and support short-term (<29 days) implantation or single-use disposable device applications.

UV Light-Curing Flood-Lamps are CE-marked for global use.

Dymax Corp.    Torrington, CT 06790
May 16, 2013 Designed to optimize safety for process-controlled cures, ECE Series is capable of curing adhesives, coatings, and inks. Lamps are suitable for curing parts with large bond lines or for simultaneously curing of multiple parts in trays. Modular units consist of power supply, reflector housing, and 400 W metal halide UV-curing bulb. By adding accessories such as UV shielding and shutter assemblies, lamps can be used as turnkey bench-top systems or integrated into automated assembly process.

FIP/CIP Gasket helps eliminate adhesion loss-induced failures.

Dymax Corp.    Torrington, CT 06790
Apr 25, 2013 Intended for fuel cell sealing applications, Ultra Light-Weld® GA-145 UV/Visible light-curable Form-In-Place (FIP) and Cure-In-Place (CIP) gasket is formulated to be tack free, soft, and flexible with low outgassing after cure. Chemical-resistant product, which can be dispensed in intricate and complex configurations, supports in-line curing and bonds to metals, glass, and PC. Gasket cures on demand and exhibits resistance to high-temperature and high-moisture environments.

LED Curable Coating targets medical micro circuits.

Dymax Corp.    Torrington, CT 06790
Apr 09, 2013 Developed to be tack-free after curing, MD® 1901-M helps prevent potential defects that could occur from components being handled too soon.  Flexible product is ISO-10993-5 approved for customers who are looking for medical grade electronics coating, seal, or moisture barrier. Able to resist cracking or delamination while board is being flexed, low-durometer coating is suited for circuits used in hearing aids, wound-care devices, and medical pumps.

Adhesive is resistant to high temperature and moisture.

Dymax Corp.    Torrington, CT 06790
Mar 04, 2013 Intended for glass-to-glass and glass-to-metal applications, Ultra Light-Weld® 431 can be used in high-temperature and high-moisture environments while maintaining adhesion and flexibility. Product bonds upon exposure to UV/Vis light for immediate use in assembly process, and minimal shrinkage reduces stress on bond line or larger cured surfaces. This adhesive may also be considered for use in bonding various plastics, ceramic, and FR4.

Water-Dilutable Oligomer exhibits water resistance after cure.

Dymax Corp.    Torrington, CT 06790
Mar 01, 2013 Providing water-barrier coating with anti-fogging characteristics, Bomar™ XR-9416 contains no water but is infinitely dilutable. Uncured 100%-solids material has viscosity of 7,000 cP at 25°C and is suited for wood coatings. When water penetrates wood, wood swells at surface and optimizes adhesion of coating without need for separate primer step, resulting in tack-free, tough, flexible coatings with water, chemical, and stain resistance.

Conformal Coating eliminates need for additional processing.

Dymax Corp.    Torrington, CT 06790
Mar 01, 2013 Specially formulated to cure in shadowed areas underneath components on printed circuit boards, Dual-Cure 9482 is tack-free immediately after curing, helping to avoid defects such as fingerprints. Light- and moisture-cure coating is engineered for thicknesses up to 0.010 in. and demonstrates optimal re-workability. Fluorescing vivid blue when exposed to UV light, 9482 enables obvious detection of coating presence before and after cure.

Hand-Held Spray Guns handle medium- and high-viscosity fluids.

Dymax Corp.    Torrington, CT 06790
Aug 13, 2012 Available in standard- and high-flow models, Series SG-100 facilitates manual spraying of materials for masking and coating applications. Pneumatically operated systems can dispense from pressurized cartridges, bottles, and pails. All wetted components are stainless steel, Teflon®, or Kalrez® for compatibility with variety of fluids. With adjustment of material flow and spray atomization, spray guns deliver dispensing accuracy with minimal material waste.

Valve Dispensing System is built for accuracy, consistency.

Dymax Corp.    Torrington, CT 06790
Jul 20, 2012 Utilizing pneumatic, NC diaphragm valve, Model 475 dispenses low- to high-viscosity fluids. Design of internal diaphragm and adjacent parts prevents migration of fluid into actuating section within valve, while diaphragm toughness and materials selection for component construction promote extended life between maintenance schedules. Along with 25 micron air filter regulator, features include integrated shutoff valve and pressure exhaust as well as stroke adjustment knob.

Digital Syringe Dispenser replaces squeeze bottles.

Dymax Corp.    Torrington, CT 06790
Apr 17, 2012 Suited for low- to high-viscosity materials, Model SD-100 is compatible with variety of syringe sizes ranging from 3-55 cc. Digital timer has range of 0.01-9,999 seconds, giving operator precise control over fluid dispense. Adjustable vacuum suck-back results in clean, drip-free shut-off of materials. Featuring portable design, Model SD-100 is suited for use as operator work station and can also be integrated into automated process by connecting external signal to system input.