DC-DC Converters support remote I/O applications.

WAGO Corp.    Germantown, WI 53022
May 21, 2013 Running 24 Vdc controls from 12 Vdc batteries or chargers, 789 Series powers I/O within mobile manufacturing, remote energy production, and material handling applications. Units operate from input ranges of 8–16 Vdc or 19.2–28.8 Vdc and provide up to 90% efficiency; input polarity safeguards electronics. Measuring 17.5 mm wide, converters feature temperature range of -25 to +55°C or -40 to +70°C, and include vibration-resistant, maintenance-free CAGE CLAMP® Spring Pressure terminations.

WLAN Ethernet Gateways aid machine-to-machine networking.

WAGO Corp.    Germantown, WI 53022
May 02, 2013 Capable of wirelessly transmitting data up to 1,300 ft line-of-sight, 2.5 GHz Model 758-916 and 5 GHz Model 758-917 replace Ethernet network cables by pairing with each other or Access Point of same radio technology. IP65 housing, featuring integrated antenna, permits enclosure-free installation in industrial environments, while on-unit LEDs provide diagnostics/operational status updates. Applications include motion-intensive, disconnected mobile, or hard-to-connect machinery.

Programmable Logic Controller provides network redundancy.

WAGO Corp.    Germantown, WI 53022
Apr 02, 2013 Capable of withstanding constant shock and vibration, Model 750-885 Media Redundancy Controller features 2 redundant networks backed by dual, independent Ethernet interfaces and 1 MB of data memory. Ethernet ports permit operation over independent networks and paths, which are accessible via different IP addresses and MAC IDs. If Path 1 fails, Path 2 resumes communication. Providing up to 32 GB of extra memory, SD card supports back-up-and-restore, file transfer, and time-stamping/data logging.

Terminal Blocks aid PCB manufacture via pluggable design.

WAGO Corp.    Germantown, WI 53022
Mar 22, 2013 Available in 3.5, 5.0, and 7.5 mm pin spacing, picoMAX® eCOM Pinstrip Pluggable Terminal Blocks support OEMs manufacturing automation, test/measurement, and process electronics. Efficiency and usability are enhanced via elimination of pin housing. Push-in (solid and ferruled conductors) and push-button terminations (stranded conductors) accelerate high-density PCB manufacturing and installation, while factory-installed straight or angled pins allow horizontal or vertical PCB mounting.

I/O Modules offer hardware delay times of less than 10 ms.

WAGO Corp.    Germantown, WI 53022
Mar 12, 2013 Available for SPEEDWAY 767 I/O-SYSTEM, Models 767-3806 8DI, 767-4808 8DO (0.1 A), and 767-5401 DIO (0.2 A) are engineered for hard, real-time requirements of motion control-based automation. Modules support high-speed packaging sensors and actuators, such as solenoids/valves and proximity switches. Machine-mount units connect to actuators via 4 shielded M12 ports that prevent EMC interference. In addition to inversion, simulation, and diagnostics, modules offer variety of configurable functions.

Pluggable Connector System carries ratings up to 15 A/300 V.

WAGO Corp.    Germantown, WI 53022
Feb 25, 2013 Intended for PCB applications, picoMAX® employs dual-purpose spring design that applies force of one CAGE CLAMP®S contact spring for vibration-resistance up to 20 g and absolute connection integrity in temperatures up to 125°C. Dynamic contact force from Cr-Ni stainless steel spring clamps conductors and connects header pin. Offered in 2–12 pole configurations with 3.5, 5, or 7.5 mm pin spacing, picoMAX supports wire-to-wire, wire-to-board, board-to-wire, and panel feedthrough connections.

Thermal Transfer Printer expedites marking process.

WAGO Corp.    Germantown, WI 53022
Feb 25, 2013 Able to print 100 terminal block markers in 10.7 sec, Ethernet-ready smartPRINTER weighs 4.4 lb, measures 6.9 in. long, and is integrated with ProServe® Design and Engineering software. Markers for 25 terminal blocks can be printed and installed within 15.5 sec. Solution marks WMB markers, exclusive Continuous Marking Strips, wire/cable markers, push-button plates, and adhesive labels. Promoting wiring accuracy, Multi-Line Marking creates up to 3 lines of text per terminal block.

DC/DC Converters feature touch-safe design.

WAGO Corp.    Germantown, WI 53022
Feb 13, 2013 Packing characteristics of 110 V power supply into 6 mm wide DIN-rail terminal block, 859 Series eliminates redundant power supplies for 5–12 V applications, including running 24 Vdc sensors and other controls on battery power. All models feature short-circuit protected outputs, reverse voltage protection, and TVS diode protection. Line regulation from 0.5–2%, varying by model, ensures power consistency, while efficiency up to 85% limits heat generation and power draw.

Fieldbus Coupler is compatible with 31.25 µs Sercos cycles.

WAGO Corp.    Germantown, WI 53022
Feb 01, 2013 IP67 SPEEDWAY 767-1311 links fieldbus level to Sercos V1.2 real-time Ethernet fieldbus system. Supporting all Sercos cycle times, coupler integrates into Sercos system via Standardized Sercos Profiles and Device Description (SDDML). Machine-mount unit offers 8 high-speed digital inputs to capture binary signals from switches/sensors with 10 µs scanning cycle. Product connects to range of WAGO-I/O-SYSTEM modules, supporting real-time applications with I/O cycles of 250 µs.

Ethernet I/O Controller is Smart Grid-ready.

WAGO Corp.    Germantown, WI 53022
Jan 23, 2013 Based on ETHERNET 2.0 Controller with SD Card, 750-880/0025-0002 ECO Telecontroller supports Smart Grid integration of small, localized renewable energy producers. DIN-rail mount product converts signals via connected I/O into utility-friendly, IEC-compliant data. Maximizing space within compact substation control cabinets, unit integrates Ethernet switch and dual Ethernet ports. SD Card Memory Expansion slot supplements 1 MB data memory with up to 32 GB of additional memory.