WLAN Ethernet Gateways aid machine-to-machine networking.

WAGO Corp.    Germantown, WI 53022
May 02, 2013 Capable of wirelessly transmitting data up to 1,300 ft line-of-sight, 2.5 GHz Model 758-916 and 5 GHz Model 758-917 replace Ethernet network cables by pairing with each other or Access Point of same radio technology. IP65 housing, featuring integrated antenna, permits enclosure-free installation in industrial environments, while on-unit LEDs provide diagnostics/operational status updates. Applications include motion-intensive, disconnected mobile, or hard-to-connect machinery.

Programmable Logic Controller provides network redundancy.

WAGO Corp.    Germantown, WI 53022
Apr 02, 2013 Capable of withstanding constant shock and vibration, Model 750-885 Media Redundancy Controller features 2 redundant networks backed by dual, independent Ethernet interfaces and 1 MB of data memory. Ethernet ports permit operation over independent networks and paths, which are accessible via different IP addresses and MAC IDs. If Path 1 fails, Path 2 resumes communication. Providing up to 32 GB of extra memory, SD card supports back-up-and-restore, file transfer, and time-stamping/data logging.

Terminal Blocks aid PCB manufacture via pluggable design.

WAGO Corp.    Germantown, WI 53022
Mar 22, 2013 Available in 3.5, 5.0, and 7.5 mm pin spacing, picoMAX® eCOM Pinstrip Pluggable Terminal Blocks support OEMs manufacturing automation, test/measurement, and process electronics. Efficiency and usability are enhanced via elimination of pin housing. Push-in (solid and ferruled conductors) and push-button terminations (stranded conductors) accelerate high-density PCB manufacturing and installation, while factory-installed straight or angled pins allow horizontal or vertical PCB mounting.

I/O Modules offer hardware delay times of less than 10 ms.

WAGO Corp.    Germantown, WI 53022
Mar 12, 2013 Available for SPEEDWAY 767 I/O-SYSTEM, Models 767-3806 8DI, 767-4808 8DO (0.1 A), and 767-5401 DIO (0.2 A) are engineered for hard, real-time requirements of motion control-based automation. Modules support high-speed packaging sensors and actuators, such as solenoids/valves and proximity switches. Machine-mount units connect to actuators via 4 shielded M12 ports that prevent EMC interference. In addition to inversion, simulation, and diagnostics, modules offer variety of configurable functions.

Pluggable Connector System carries ratings up to 15 A/300 V.

WAGO Corp.    Germantown, WI 53022
Feb 25, 2013 Intended for PCB applications, picoMAX® employs dual-purpose spring design that applies force of one CAGE CLAMP®S contact spring for vibration-resistance up to 20 g and absolute connection integrity in temperatures up to 125°C. Dynamic contact force from Cr-Ni stainless steel spring clamps conductors and connects header pin. Offered in 2–12 pole configurations with 3.5, 5, or 7.5 mm pin spacing, picoMAX supports wire-to-wire, wire-to-board, board-to-wire, and panel feedthrough connections.

Thermal Transfer Printer expedites marking process.

WAGO Corp.    Germantown, WI 53022
Feb 25, 2013 Able to print 100 terminal block markers in 10.7 sec, Ethernet-ready smartPRINTER weighs 4.4 lb, measures 6.9 in. long, and is integrated with ProServe® Design and Engineering software. Markers for 25 terminal blocks can be printed and installed within 15.5 sec. Solution marks WMB markers, exclusive Continuous Marking Strips, wire/cable markers, push-button plates, and adhesive labels. Promoting wiring accuracy, Multi-Line Marking creates up to 3 lines of text per terminal block.

DC/DC Converters feature touch-safe design.

WAGO Corp.    Germantown, WI 53022
Feb 13, 2013 Packing characteristics of 110 V power supply into 6 mm wide DIN-rail terminal block, 859 Series eliminates redundant power supplies for 5–12 V applications, including running 24 Vdc sensors and other controls on battery power. All models feature short-circuit protected outputs, reverse voltage protection, and TVS diode protection. Line regulation from 0.5–2%, varying by model, ensures power consistency, while efficiency up to 85% limits heat generation and power draw.

Fieldbus Coupler is compatible with 31.25 µs Sercos cycles.

WAGO Corp.    Germantown, WI 53022
Feb 01, 2013 IP67 SPEEDWAY 767-1311 links fieldbus level to Sercos V1.2 real-time Ethernet fieldbus system. Supporting all Sercos cycle times, coupler integrates into Sercos system via Standardized Sercos Profiles and Device Description (SDDML). Machine-mount unit offers 8 high-speed digital inputs to capture binary signals from switches/sensors with 10 µs scanning cycle. Product connects to range of WAGO-I/O-SYSTEM modules, supporting real-time applications with I/O cycles of 250 µs.

Ethernet I/O Controller is Smart Grid-ready.

WAGO Corp.    Germantown, WI 53022
Jan 23, 2013 Based on ETHERNET 2.0 Controller with SD Card, 750-880/0025-0002 ECO Telecontroller supports Smart Grid integration of small, localized renewable energy producers. DIN-rail mount product converts signals via connected I/O into utility-friendly, IEC-compliant data. Maximizing space within compact substation control cabinets, unit integrates Ethernet switch and dual Ethernet ports. SD Card Memory Expansion slot supplements 1 MB data memory with up to 32 GB of additional memory.

Power Distribution Units have 38 mm depth, 1.47 in. profile.

WAGO Corp.    Germantown, WI 53022
Dec 21, 2012 Routing power supplies to PLCs, I/O, and associated components within space-restricted panels, DIN-rail mount Power Distribution Blocks include 4 models rated up to 30 A and one model up to 65 A. There are 2 poles for connecting both sides of power supply output and daisy-chaining offered on 30 A block, and connection configurations range from 2 x 8 to 2 x 24; 65 A unit is single-pole block. CAGE CLAMP® Spring Pressure Technology minimizes installation time for all conductors AWG 28–12.