Handheld Voltage Detectors indicate voltages down to 5 Vac.

HD Electric Co.    Waukegan, IL 60085
Oct 08, 2012 Always on and ready to use, LV-5 Stray Voltage Detector can detect voltage from 5–600 Vac with direct contact and above 600 Vac at distance. Unit has utility-grade, waterproof design and flashing red LED that indicates when voltage is present. VP-1 Voltage Probe, designed to be used as handheld direct contact secondary voltage detector from 50–600 Vac, and as proximity voltage detector for higher voltages, uses both flashing red light and beeper to indicate when voltage is present.

Voltmeter Kit measures up to 80 kV with add-on resistors.

HD Electric Co.    Waukegan, IL 60085
Sep 06, 2012 Powered by standard 9 V alkaline battery, DVM-80UVK Universal Voltmeter Kit features triple auto ranging 3.5-digit display that reads in kilovolts from 5 V to 80 kV with accuracy within 1% of reading. Meter includes backlit display, Peak Hold mode, and auto shut-off. Supplied with variety of accessories, kit enables users to measure AC and DC voltages, measure voltage on elbow test points, and test underground cables for faults.

Voltage Detector offers 7 ranges from 120 V to 69 kV.

HD Electric Co.    Waukegan, IL 60085
Aug 13, 2012 When voltage is detected, PRX-69D Distribution Proximity Voltage Detector gives audible and visual indication with typical detection distance of 10 in. Non-contact unit has ability to detect voltage on most elbow test points at 120 V setting. With rechargeable internal battery, device can be charged from 12 Vdc automotive outlets or from 115-240 Vac. Full charge takes 3 hours and delivers 1 week of continuous use.

Carrying Case Lanyard protects personal voltage detector.

HD Electric Co.    Waukegan, IL 60085
Jul 16, 2012 Combining carrying case and lanyard, C-10 Series protects V-Watch personal voltage detector when not in use and acts as lanyard when device is in use. Variants include C-10FR, which is made with high-visibility safety green material and shielded with outer layer of flame-resistant material, and C-10, which is made with black shielded material. Both effectively turn off V-Watch when not in use, feature rugged swivel clip, and allow for proper mid-chest positioning via adjustable lanyard.

Voltmeter Kit suits overhead and underground applications.

HD Electric Co.    Waukegan, IL 60085
Nov 17, 2011 Supplied in soft-sided, multi-functional carrying bag with built-in bucket hooks, Model DVM-80UVK is designed to perform voltmeter and phasing operations for virtually all overhead and underground applications. Kit includes dual stick phasing voltmeter with overhead hook probes for use up to 40 kV, as well as add-on resistor sticks for measurements up to 80 kV. Kit also contains underground bushing probes, cable fault tester, and shotgun hotstick adapters.

Voltage Detector comes with 9 selectable voltage ranges.

HD Electric Co.    Waukegan, IL 60085
Nov 29, 2010 Featuring electronic touch pad with large buttons, PRX-500 proximity voltage detector can identify voltage from 120 V up to 500 kV. Unit offers audible and visual indication of voltage detected from elbow test points up to highest transmission voltages. Rechargeable internal battery can be charged from truck or wall outlet.

Digital Voltage Indicator can measure elbow test points.

HD Electric Co.    Waukegan, IL 60085
Feb 01, 2010 Designed to read voltage on conductor from 0.1-500 kV line-to-ground, direct contact DVI-500 displays voltage on large 3-digit ultra-bright LED display. Compact unit provides audible indication when voltage is detected, allowing user to distinguish between nominal and induced voltages. Display is easy to read on end of long hotstick and can be used on overhead lines or in underground applications.

General Purpose Dual Voltage Leakage Tester is portable.

HD Electric Co.    Waukegan, IL 60085
Aug 01, 2008 Model PT-5000W High Voltage DC Leakage Tester is designed to test primary distribution voltage or secondary voltage equipment for faults or high leakage currents. It can only be used on cables or equipment that have been verified to be de-energized and discharged. Suited for checking for leakage on cables, transformers, capacitors, joints, terminations, and insulators, unit allows test voltage to be set to either 500 or 5,000 Vdc.

Cable Identifier tests both underground and overhead cables.

HD Electric Co.    Waukegan, IL 60085
May 27, 2008 With ability to identify correct phases of de-energized and discharged overhead and underground cables, PF-50 Cable Identifier consists of transmitter and receiver that are designed to be hand-held, with or without gloves, or that can be mounted and used on hotsticks. High test voltage enables device to test full mile of cable. Bright red LEDs on both units indicate that PF-50 units are connected to same cable.

Voltmeter can take readings on capacitive test points.

HD Electric Co.    Waukegan, IL 60085
Jun 29, 2007 Model DVM-80T Digital Voltmeter & Phasing Set with Capacitive Test Point Mode measures voltages up to 40 kV and up to 80 kV with pair of add-on resistors. Phase Accurate Technology makes all voltage readings made from line-to-line or line-to-ground accurate and repeatable to within 1%. With 2-stick design, unit can be used in overhead and underground applications. Digital meter displays true rms voltage on conductor.