Latest New Product News from Graymills Corporation
Immersion Parts Washers utilize 3,000 gph agitation pump.Graymills Corporation Chicago, IL 60613
Jun 03, 2011 Made of heavy gauge metal with powder coated exterior, TL Series Liftkleen(TM) Semi-Automatic Washers accommodate parts up to 47 x 18 x 24 in. For water-based applications, units are available in stainless steel with insulated tank and thermostatically adjustable heat up to 180°F. Electro-pneumatic lift mechanisms provide 300 lb capacity with adjustable stroke/speed settings. Automatic open-and-close lid, filtered detail brush, and recirculation pump allow spot cleaning of hard-to-reach areas.
Solvent Parts Washer meets environmental regulations.Graymills Corporation Chicago, IL 60613
Jun 03, 2011 Compliant with freeboard ratio/rule of .75, Handikleen(TM) model PL36-FB features 16/18 gauge steel construction with powder coated exterior and removable work shelf. Upon removal of shelf, 20 gal unit may be used as soak tank. Built-in filtration and pump deliver cleaning and rinsing action through flexible metal flush hose, and bottom drain facilitates fluid change-outs. Other features include abrasive-resistant, 170 gpm pump; external drain shelf; and 170 gph flow.
Ultrasonic Parts Washer is PLC controlled.Graymills Corporation Chicago, IL 60613
Dec 17, 2008 Super Sonic Liftkleen Parts Washer features heated, full-immersion cleaning coupled with ultrasonics to thoroughly wash intricate and difficult-to clean parts. Features include touchscreen interface, filter system, and automated lift, agitation platform, and lid that facilitate loading/unloading of parts. Heavy-duty stainless steel construction makes it rugged and reliable, and dual-wall fully insulated tank conserves energy.
Heated Aqueous Parts Washer is made from recycled plastic.Graymills Corporation Chicago, IL 60613
Jul 15, 2008 Model PH822-A environmentally minded, solvent-free parts washer offers electrical control interface to provide complete machine status to operator. Unit features flow-thru work brush, flexible stay put nozzle, adjustable thermostat, 300 gph pump, GFCI protection, and triple-action filtration. Washer is 4-legged, and comes with sink and stainless steel work shelf which can be removed to expose 10 in. deep soak area.
Multistage Pump suits through-the-tool applications.Graymills Corporation Chicago, IL 60613
Sep 13, 2006 Available in 6 models, MVP multistage pump offers range of pressures up to 320 psi and flow up to 24 gpm. Pump operates with all stainless steel impellers, housing, and intake. Suited for end milling, drilling, boring, and reaming applications, pump can be mounted horizontally and vertically.
Parts Washer provides full immersion cleaning.Graymills Corporation Chicago, IL 60613
Sep 13, 2006 Providing 250 lb load capacity, Sonic Liftkleen is equipped with 125-gal cleaning tank, as well as transducers that evenly distribute ultrasonic waves to eliminate blind spots. Agitation lift platform facilitates load/unload and provides up/down stroke that flushes away dirt while part is immersed in cleaning solution. Weir chamber and sparger bar continuously remove oil and other floating debris from fluid surface so parts emerge from tank without passing through residue.
Bioremediating Parts Cleaners eliminate hazardous waste.Graymills Corporation Chicago, IL 60613
Mar 17, 2005 Made of high-density polypropylene, Models BIO436 and BIO536 feature solid-state electronic controls and 300 gph pump that delivers heated, aqueous, non-hazardous, pH-neutral cleaning solution through Flow-Thru brush or adjustable nozzle. Built-in safety features include low liquid level protection, ground fault circuit indicator, and clearly marked status indicator lights.
Oil/Water Separator maintains quality of coolant.Graymills Corporation Chicago, IL 60613
May 14, 2004 Model OSEP-2 portable fluid-conditioning filtration system and oil/water separator removes tramp oils from water-based coolants used in machining centers. Featuring 17 gal capacity and heavy-duty casters, system can be moved throughout plant. It helps keep bacteria levels to minimum, as well as smoking caused by oils in coolant coming in contact with hot tooling. Model OSEP-2 requires 50 psi for operation; no electrical connection is needed.
Parts Washers provide on-the-spot cleaning.Graymills Corporation Chicago, IL 60613
Mar 15, 2004 Models DH436/DH536 feature thermoplastic sink, drum-style reservoir, and 30-gal cleaning solution capacity. Pump delivers 300 gph of heated, aqueous cleaning fluid. Safety package includes ground fault circuit interrupter, low level fluid control, and pilot light to indicate heater function. Both models have wide stable bases that support 300 lb parts load in 36 x 22 x 9 in. deep tank. Model DH436 is lidded, while Model DH536 has stainless steel backsplash with no lid.
Parts Washer cleans dirt without use of abrasive media.Graymills Corporation Chicago, IL 60613
Mar 31, 2003 Tempest 20 Aqueous Jet Spray Cabinet Parts Washer features stainless steel work chamber measuring 36 x 38 x 28 in. and handles loads up to 500 lb. It includes roll out, 20 gal, stainless steel cleaning solution reservoir; reusable 110 mesh filter, and 1500 W electric heater. One horsepower pump generates 600 psi through hand-held adjustable spray nozzle and strips deposits from intricate passages. Fluid is continuously filtered to trap chips and other solids.
Click below for more Product News from Graymills Corporation
Other Company News From Graymills Corporation
Nov 20, 2010
New All-In-One Parts Washer Resource Catalog
Aug 05, 2009
Graymills Cleaners Meet Clean Air Requirements
Dec 05, 2008
High Pressure Coolant Pumps for 'Through-the-Tool' Applications
|Home | My ThomasNet News® | Industry Market Trends® | Submit Release | Advertise | Contact News | About Us|
Brought to you by Thomasnet.com
Browse ThomasNet Directory|