Latest New Product News from Aremco Products, Inc.
High-Temperature White Coating suits applications to 1,500°F.Aremco Products, Inc. Valley Cottage, NY 10989
Sep 19, 2014 Consisting of single-part, waterborne, inorganic coating, Ceramacoat™ 845-WHT bonds well to glass and quartz components in applications to 1,500°F. Odorless product is formulated to viscosity range of 400–700 cP with solids content of 41.3% by weight and 22.9% by volume, and density of 1.80–1.85 g/cc. Applied by dipping or pneumatic spray equipment, coating has typical dry film thickness of less than 0.001 in. After curing, film is abrasion and moisture resistant, with no outgassing.
Potting Compound encapsulates high-temp resistance heaters.Aremco Products, Inc. Valley Cottage, NY 10989
Aug 08, 2014 Consisting of hydraulic-setting, phosphate-bonded, zirconium oxide filled ceramic compound, Ceramacast™ 646N is suitable for encapsulating and potting high temperature electrical components such as resistance heaters, hot gas igniters, thermocouples, and strain gauges used in applications to 3,000°F. Cured material demonstrates shrinkage rate of less than 1%, volume resistivity of 109 Ω-cm, dielectric strength of 250 V/mil, and compressive strength of 11,500 psi.
High Temperature Adhesive suits applications to 2,300°F.Aremco Products, Inc. Valley Cottage, NY 10989
Jun 09, 2014 Formulated for bonding and coating mica, glass-ceramics, and metals, Ceramabond™ 632 features dielectric strength of 150 V/mil at room temperature, coefficient of thermal expansion of 4.7 ppm/°F, and viscosity of 10,000–25,000 cp. Specific gravity is 1.45–1.50 g/cc and pH is 11.0. Applied using brush, syringe, or pneumatic dispenser, mica-filled adhesive sets rapidly at room temperature and step cures at 200°F and 500°F for 2 hours each. Cured material resists most acids, solvents, and fuels.
Potassium Silicate Binder produces high-temperature coatings.Aremco Products, Inc. Valley Cottage, NY 10989
May 14, 2014 Inorganic, water-dispersed Ceramabind™ 643-1, resistant to temperatures to 3,000°F, mixes with range of oxide and metallic powders into inert, electrically, chemically, and wear-resistant material that will not outgas under ultra high vacuum (UHV). Typical uses include formulating corrosion protective coatings for high-temperature metal structures as well as producing chemically resistant adhesives and patching compounds. Viscosity is 50–60 cP, and solids content by weight is 30.0–35.0%.
Protective White Coating serves high-temperature applications.Aremco Products, Inc. Valley Cottage, NY 10989
Apr 30, 2014 Used to coat lighting fixtures and industrial process equipment up to applications of 1,100°F, Corr-Paint™ CP4040 single-part, white-pigmented, silicone-based water-dispersible coating system adheres to glass, quartz, ceramic, as well as carbon and stainless steel. Coating dries at room temperature and can be cured in-situ or more rapidly at 450°F in 1 hr or 480ºF in 45 min. Cured coating is color stable at high temperatures and resistant to oxidation, UV light, humidity, and salt spray.
Copper-Filled Grease suits heat transfer applications.Aremco Products, Inc. Valley Cottage, NY 10989
Mar 19, 2014 Consisting of single-part, 100% solids, thermally conductive, silicone grease, Heat-Away™ 640 is used in heat transfer applications from -60 to 550°F. Product is formulated as thick paste that will not flow after application and maintains stable viscosity over entire temperature range. With thermal conductivity of 4.68 W/m-K, grease optimizes thermal transfer between heaters and process vessels and various heat sinks used in heat exchangers in electrical and electronic applications.
Silver-Filled Epoxy Adhesive suits applications up to 480°F.Aremco Products, Inc. Valley Cottage, NY 10989
Jan 31, 2014 Formulated using high purity silver flake, Aremco-Bond™ 556-HTHC is used for microelectronic chip bonding, semiconductor die-attach, hybrid packaging, and other electrical/electronic assembly applications. Two-part, electrically and thermally conductive adhesive exhibits low volume resistivity of less than 0.0001 Ω-cm at room temperature and thermal conductivity of 2.2 W/m-°K. Product offers tensile shear strength of 1,700 psi, Shore D hardness of 90, and viscosity range of 40,000–45,000 cP.
Thermally Conductive Epoxy serves applications up to 572°F.Aremco Products, Inc. Valley Cottage, NY 10989
Nov 25, 2013 Used for bonding, potting, tooling, and molding, Aremco-Bond™ 805 adheres to high-temperature plastics, glass, ceramic, and high-expansion metals. This 2-component, 100% solids, aluminum-filled epoxy cures at room temperature in 24 hr with final cure at 200°F in 2 hr. Cured material exhibits thermal conductivity of 12.5 Btu-in/hr-ft²-°F and dielectric strength of 50 V/mil. Respective tensile shear and flexural strengths are 1,800 and 15,500 psi, and Shore D Hardness is 87.
Urethane Coating provides high temp corrosion resistance.Aremco Products, Inc. Valley Cottage, NY 10989
Oct 16, 2013 Applied in 4.0 mil wet film thickness that dries to 2.0 mils, Corr-Paint™ CP2010 provides corrosion resistance on copper and steel components and structures exposed to oxidation and corrosive atmospheres up to 400°F. Single-part, aluminum-rich formula dries and cures at room temperature to hard, non-porous, abrasion-resistant surface. With viscosity of 300-600 cP and specific gravity of 1.08 g/cc, product is also resistant to wide range of acids, bases, fuels, and solvents.
High Temp Refractory Coating increases substrate durability.Aremco Products, Inc. Valley Cottage, NY 10989
Sep 26, 2013 Adhering to graphite, ceramic cloth, and fiberboard, Pyro-Paint™ 634-AS is used to bond, coat, and seal graphite and refractory materials used in molten metal fluid handling components and structures in foundry applications to 2,300°F. Alumina-silica, fiber-reinforced, ceramic coating also prevents wear and oxidation of graphite impellers at melt line in handling of molten aluminum. Product is formulated with solids content of 61.2% by weight and 63.3% by volume to 400–700 cP viscosity range.
Click below for more Product News from Aremco Products, Inc.
Other Company News From Aremco Products, Inc.
Jan 29, 2010
New Technical Ceramics Data Sheet Available from Aremco
Jul 28, 2006
Technical Bulletin Describing Crystalbond Adhesives Now Available
Feb 10, 2006
New Pyro-Putty Technical Bulletin A3 Now Available
Jan 27, 2006
Ceramabond 503 Now Used to Bond & Seal Thermocouple Assemblies
|Home | My ThomasNet News® | Industry Market Trends® | Submit Release | Advertise | Contact News | About Us|
Brought to you by Thomasnet.com
Browse ThomasNet Directory|