Pressure Regulators have output pressures from 0-30 psig.

Beswick Engineering Co., Inc.    Greenland, NH 03840
Feb 23, 2009 Suited to low pressure regulation such as ½ psig, PRDHF high flow regulator weighs approximately 35 g in brass & stainless steel and about 18.2 g in aluminum. Maximum inlet supply pressure is 500 psig, and both inlet and outlet ports are tapped 10-32 UNF. PRDH8 manifold mount version weighs 52 g in brass and stainless steel, and inlet is 5/16-24 UNF external thread and outlet port is through 0.094 in. dia hole at base of regulator body.

Diaphragm Pressure Regulators have single-stage design.

Beswick Engineering Co., Inc.    Greenland, NH 03840
Feb 13, 2009 Suited for gas and pneumatic pressure regulation, PRDHF non-relieving, high-flow regulator controls output pressures from 0-30 psig. Max inlet supply pressure is 500 psig, and inlet/outlet ports are tapped 10-32 UNF. Also available, manifold-mounted PRDH8 offers features similar to PRDHF but eliminates need for fitting and tubing connections. It features 5/16-24 UNF external thread inlet, and outlet port is through 0.094 in dia hole at base of body.

Quick Disconnects suit space-/weight-conscious applications.

Beswick Engineering Co., Inc.    Greenland, NH 03840
Feb 26, 2008 Constructed of stainless steel throughout and weighing 15 g, dry break quick disconnect connects without any fluid spray or leakage and disconnects with minimal dead volume. Internal and external ends are available with 10-32 internal or external threads and include captured o-ring seals for leak-tight connections. Panel mount versions are also available. Products suit applications where space, leak-tightness, durability, and weight are of concern.

Ball Valves are suitable for applications up to 250 psig.

Beswick Engineering Co., Inc.    Greenland, NH 03840
Jan 08, 2008 Miniature ball valve are available in standard shut-off MBV-1010, 3-way diverting MBVT-1010, and 3-way mixing diverting MBVMD-1010. Stainless steel valves are customized for non-restricted flow and weigh 9 or 12 g. Mixing diverting valve allows either port to be individually selected or both ports to be simultaneously selected with no shut-off. Inlet and outlet ports are 10-32 UNF standard.

Miniature Flow Control Valve has pessure-compensated design.

Beswick Engineering Co., Inc.    Greenland, NH 03840
Jun 19, 2007 Available in brass with Buna-N (standard) or Viton (optional) seal material, PCFCD-1N1 works with liquids and gasses. Design maintains constant flow rate, adjustable by end-user, regardless of upstream or downstream pressure variations. Pressure regulation is accomplished with low-friction diaphragm mechanism. Weighing 48 g, valve controls flow rates of 0-4.2 gal/hr of water and 0-20 ft³/hr of air. Maximum rated inlet supply pressure is 500 psig.

Slide Sleeve Valve provides on/off control of gas or liquid.

Beswick Engineering Co., Inc.    Greenland, NH 03840
Feb 21, 2007 Operating in in-line configuration, ultra-miniature, M3 threaded Model M3SV-N can be attached directly in fluid circuit and does not require panel mounting. Two-way, non-venting device is 0.78 in. long from end to end with no preferred flow direction. Maximum inlet pressure is 250 psig, and approximate flow orifice is 0.024-0.028 in. diameter. Available in brass or stainless steel, valve features captured O-ring seal design for leak-tight operation.

Adapter Fittings connect metric to imperial threads.

Beswick Engineering Co., Inc.    Greenland, NH 03840
Dec 06, 2006 Miniature fittings adapt Imperial/English threaded components to metric threaded components. Products include M3 Internal to M5 External; M3 External to M5 External Nipple Fitting or M3 Internal Extension Fitting; and M3 External Universal Nipple Fitting. Also available are 10-32 External to M3 or M5 Internal; 10-32 Internal to M5 Internal or M6 External; and 10-32 or M5 Internal to M3 External Fittings. Additional types are available.

Miniature Compression Fittings suit 1/4 in. OD tubing.

Beswick Engineering Co., Inc.    Greenland, NH 03840
Dec 01, 2006 Featuring 10-32 thread, straight brass Model MCB-14 and 303 SS Model MCB-14-303 measure 53/64 in. long and are designed with ½ in. hexagonal body. Elbow compression fittings include brass Model MCBL-14 and 303 SS Model MCBL-14-303, which are 59/64 in. long and have installed height of 21/32 in. All provide leak-tight seal for tubing connections. Seal options include Buna-N, Fluorocarbon, EPDM, and Silicone.

Metering Valve includes stops and locking mechanism.

Beswick Engineering Co., Inc.    Greenland, NH 03840
Sep 25, 2006 Rated to 200 psig max inlet pressure, Miniature Metering Valve features 10-32 internal threads on both inlet and outlet connections. Mechanical stops allows user to positively position sleeve in either FULL ON or FULL OFF position, while set screw locking mechanism locks sleeve in position once desired flow rate has been achieved. Sleeve and seals are designed to be insensitive to vibration, preventing inadvertent changes to flow setting.

Pressure Regulator incorporates 10-32 ports.

Beswick Engineering Co., Inc.    Greenland, NH 03840
Aug 28, 2006 Weighing 23 g in aluminum and 50 g in brass and SS, Model PRD3-ANB-C-DEF 2-stage, non-relieving diaphragm pressure regulator controls output pressures from 0-20 psig and is suited for low pressure regulation such as ½ psig. Device features low-friction sensor and valve arrangement for regulation and spring arrangement for handling range of regulated output pressures. With maximum rated inlet supply pressure of 500 psig, unit is used in applications with varying input pressures.