Latest New Product News from Kee Safety, Inc. (formerly Kee Industrial Products, Inc.)
Lifeline System provide fall protection at working heights.Kee Safety, Inc. (formerly Kee Industrial Products, Inc.) Buffalo, NY 14206-2665
Apr 30, 2013 KeeLine® Overhead Lifeline Systems provide fall protection and support for 1 or 2 workers at elevated heights during construction and maintenance. Mounted directly above user for overhead applications, personal protection equipment (PPE) system is comprised of 5/16 in. thick, 316 Stainless Steel wire and electro-polished brackets with 2 permanently attached wheeled travelers. Travel line can be configured to allow single or multiple spans of up to nearly 78 ft between supports.
Roof Hatch Railing System installs in less than 30 min. .Kee Safety, Inc. (formerly Kee Industrial Products, Inc.) Buffalo, NY 14206-2665
Dec 30, 2011 Designed to fit all standard roof hatch models, KeeHatch features pre-built uprights and drop-in fittings to install horizontal rails. System is used for safe egress and ingress through roof hatches, as well as fall protection when hatch is open. Constructed of high-grade aluminum silicon magnesium alloy for corrosion resistance, KeeHatch complies with OSHA 29 CFR 1910.23, which requires that exposed sides of openings in roofs or floors have guardrail protection.
Lifeline System offers fall protection at working heights.Kee Safety, Inc. (formerly Kee Industrial Products, Inc.) Buffalo, NY 14206-2665
Sep 23, 2010 Designed to support up to 3 users over each span of up to nearly 50 ft through continuous attachment, KeeLine® Horizontal Lifeline System features in-line absorbers at beginning and end of system that eliminate need for fall-over style posts. Stainless steel wire connects to absorbers via tension indicator that shows when system is correctly tensioned. With KeeLine Traveler, users can attach at any point on system while passing corners and intermediates without detaching.
Slip-Resistant Walkway provides safety on roof surfaces.Kee Safety, Inc. (formerly Kee Industrial Products, Inc.) Buffalo, NY 14206-2665
Aug 20, 2010 Designed for workers accessing roof during construction or maintenance, Kee® Walk protects roof and uniformly distributes pedestrian load. Modular system can be adjusted on-site and accommodates flat, barrel, or sloping roofs, with steps and traverse options allowing access for virtually any roof configuration from 0-35°. With raised rough surface and open design, treads offer slip resistance and enable drainage of water. Pre-assembled step configurations come in 3 ½, 4 ½, 5, and 10 ft lengths.
Guardrail System provides fixed roof edge protection.Kee Safety, Inc. (formerly Kee Industrial Products, Inc.) Buffalo, NY 14206-2665
Sep 15, 2009 Designed for standing seam metal roofs, KEEGUARD Lite provides safe working environment for anybody required to access roof area to perform installation, maintenance, or repair. It is supplied in prefabricated kit form with aluminum uprights, rails, base plate, and fittings as well as stainless steel clamps and grub screws. Via 2 part clamps that fix over standing seam profile, standing seam guardrail system does not penetrate roof fabric while meeting standards of EN ISO14122 pt3.
Deadweight Anchor System offers rooftop fall protection.Kee Safety, Inc. (formerly Kee Industrial Products, Inc.) Buffalo, NY 14206-2665
Apr 06, 2009 Weighing up to 550 lb, with no single item weighing more than 55 lb to ease installation, WEIGHTANKA portable deadweight anchor is intended for use on roofs with up to 5° pitch. It utilizes central pedestal to raise height at which arrest force is applied, which reduces distance anchor device moves during a fall-arrest event. Used with personal protection equipment such as harnesses, unit provides fall protection for 1 or 2 workers that remain at least 20 in. away from roof edge.
Safety Railing Systems are ADA-compliant.Kee Safety, Inc. (formerly Kee Industrial Products, Inc.) Buffalo, NY 14206-2665
May 22, 2008 Kee Access® Smooth Handrail Systems are suited for stairs, ramps, walkways, and other areas where it is necessary to conform to ADA codes. Built using Kee Klamp® structural, slip-on railing components, railing system is comprised of framework of horizontal bars supported by vertical, upright posts assembled from modular fittings and standard 1¼ in. Schedule 40 pipe. Railing components are constructed of iron and are galvanized for corrosion resistance.
Bar Grating Clamps eliminate risk of corrosion damage.Kee Safety, Inc. (formerly Kee Industrial Products, Inc.) Buffalo, NY 14206-2665
Mar 14, 2008 With ability to clamp to the grating without penetrating steel or supporting members, GrateFix is designed to secure steel, aluminum, or fiberglass grating. Featuring corrosion-resistant, galvanized finish, Model GF1 G10 ASSY is offered with stepped malleable iron body, 3/8 in. dia screw, and saddle clip. Including 5/16 in. dia screw, Model GF1 S08 ASSY is constructed of 316 SS, while Model GF3 S08 ASSY is constructed of 304 SS.
Steel Fittings suit small structural building applications.Kee Safety, Inc. (formerly Kee Industrial Products, Inc.) Buffalo, NY 14206-2665
Jun 21, 2007 Available to fit 1-1½ in. dia pipe, Model 351 Ridge and Model 350 Eaves galvanized fittings have double set screws on truss outlet for pull-out resistance that holds structures together. Model 351 accommodates 1 vertical upright, 1 horizontal pipe, and 2 slope pipes that are at 125° angle, while Model 350 accommodates 1 vertical upright, 2 horizontal pipes (forming X-Y-Z axis with upright), and 1 slope pipe that is angled at 27.5° from horizontal pipe on same plane.
Railing System features structural, slip-on pipe fittings.Kee Safety, Inc. (formerly Kee Industrial Products, Inc.) Buffalo, NY 14206-2665
May 11, 2007 Designed to build ADA-compliant handrails for stairs, ramps, and walkways, Series 500 ADA Railing System comes with galvanized Klamp® iron pipe fittings to provide contiguous gripping surface. Unit is comprised of horizontal bars supported by vertical, upright posts assembled from modular fittings and standard 1¼ in. Schedule 40 pipe. System can be designed for new construction or added onto existing pipe structure by using offset fittings.
Click below for more Product News from Kee Safety, Inc. (formerly Kee Industrial Products, Inc.)
Other Company News From Kee Safety, Inc. (formerly Kee Industrial Products, Inc.)
Aug 01, 2012
Six Consecutive Years on Inc. Magazine's Top 5000 List Earns Kee® Safety, Inc. Another "Honor Roll" Recognition
Jul 19, 2012
Kee® Safety Launches Website for Canadian Business Unit
Aug 29, 2008
Kee Safety, Inc. Named to Inc. Magazine's Top 5000 in 2008
Mar 01, 2008
Kee Lite® Safety Railing System with Toe Boards Installed at Water and Wastewater Treatment Facility in Spain
Feb 27, 2008
Kee Industrial Products, Inc. Changes Name to Kee Safety, Inc.
Jul 07, 2006
Kee Industrial Products Publishes New Catalog Describing Kee Lite® Aluminum Fittings
May 11, 2006
Kee Industrial Products Publishes New Fittings Manual, Cataloging Complete Line of Kee Klamp® Slip-On Pipe Fittings for Railings and Other Tubular Structures
|Home | My ThomasNet News® | Industry Market Trends® | Submit Release | Advertise | Contact News | About Us|
Brought to you by Thomasnet.com
Browse ThomasNet Directory|