Portable Vibration Measurement System features 16 g range.

Dytran Instruments, Inc.    Chatsworth, CA 91311
Dec 07, 2012 Suitable for low-to-medium frequency vibration applications, VibraScout™ combines USB triaxial DC response accelerometer, 15 ft 4-pin to USB cable assembly, VibraScout™ Data Acquisition Software, and VibraScout Post Processor software. Variable capacitance accelerometer operates from 3.8–6.0 Vdc with low-end frequency response down to DC (0 Hz) and upper frequency range of 1,100 Hz. With software, system provides real-time, 3-directional acceleration acquisition and temperature monitoring.

Miniature Accelerometer survives temperatures to +375°F.

Dytran Instruments, Inc.    Chatsworth, CA 91311
Aug 16, 2012 Designed for use in high-temperature, general-purpose vibration applications, model 3122C miniature charge mode accelerometer has hermetically sealed, all-stainless steel design and sensitivity of 50 pC/g. Sensor operates in compression mode, and standard features include 10-32 radial connector and 10-32 tapped mounting hole. Weight of 25 g and height of 0.50 in. make this product suited for environments where high temperature and low mass are required.

Low-Powered Accelerometer suits down-hole drilling applications.

Dytran Instruments, Inc.    Chatsworth, CA 91311
Aug 10, 2012 Capable of operating to +347°F, model 3003B triaxial IEPE accelerometer is supplied in miniature titanium housing with vertical height of 0.365 in. and is designed for down-hole drill head vibration monitoring. Unit will operate with +4.0 to +5.5 Vdc compliance voltage and offers sensitivity of 2 mV/g. Along with 500 g range, features include adhesive mounting capabilities, 6 g total weight, and 4 permanently attached, 22 in. long lead wires.

Miniature Accelerometer operates in temperatures to +900°F.

Dytran Instruments, Inc.    Chatsworth, CA 91311
May 23, 2012 At 5 g and 0.39 in. high, model 3316M1 utilizes planar shear technology and features charge mode element mounted in hermetically sealed, miniature Inconel® housing. Silver window on top cover of housing provides oxygen access to crystal at high temperatures while maintaining hermetic seal. Along with sensitivity from 1-2 pC/g, unit offers 10,000 Hz upper frequency response and has 10-32 tapped hole and 10-32 radial connector. Model 3316C, similar to 3316M1, comes with 5-40 tapped hole.

Miniature Accelerometer has height of 0.23 in.

Dytran Instruments, Inc.    Chatsworth, CA 91311
Apr 23, 2012 Designed to adhesively mount in confined spaces, Model 3225M39 teardrop IEPE accelerometer offers sensitivity of 10 mV/g, has overall height of 0.23 in., and weighs 0.95 grams. It features quartz shear sensing element in lightweight titanium housing and utilizes an integral three-foot coaxial cable assembly terminating to 10-32 jack. Device offers a broad frequency response range of 1.2-10,000 Hz, making it ideal for modal analysis and environmental stress screening applications.

Isolated IEPE Accelerometer has ultra miniature teardrop design.

Dytran Instruments, Inc.    Chatsworth, CA 91311
Apr 06, 2012 At 0.119 in. high and 0.3 g, model 3224M5 is designed to adhesively mount in otherwise inaccessible spaces. Accelerometer operates in temperatures to +300°F and features shear sensing element in lightweight laser welded titanium housing. Available with 10 mV/g sensitivity, product is case isolated to avoid EMI/ground loop interference and has 3 ft integral cable that terminates to 10-32 jack. Uses include ESS, product response testing, and PCB vibration measurements.

IEPE Accelerometer provides permanent vibration monitoring.

Dytran Instruments, Inc.    Chatsworth, CA 91311
Apr 03, 2012 Used for vibration monitoring of rotating machinery and other equipment, low-profile model 3059A has thru hole 1/4-28 mount and radial 2-pin MIL-C-5015 connector. Design incorporates ceramic shear sensing element in stainless steel housing, and sensor can be turned 360° prior to being secured to aid installation. Available with sensitivity of 100 mV/g, hermetically sealed unit has low-end frequency response of 0.5 Hz and is internally case isolated to avoid EMI/ground loop interference.

In-Line Charge Amplifier suits high-temperature applications.

Dytran Instruments, Inc.    Chatsworth, CA 91311
Apr 02, 2012 Designed for use with high-temperature charge mode accelerometers, Model 4753B is powered using constant current sources and is compatible with IEPE designated instrumentation. Miniature device can accept sensors with insulation resistance as low as 100 kW without deterioration in performance. Offered with 10-32 jack input connector and BNC jack output connector, Model 4753B features 10 mV/pC sensitivity and turn-on time of less than 5 seconds.

IEPE Accelerometer suits environmental stress screening.

Dytran Instruments, Inc.    Chatsworth, CA 91311
Mar 19, 2012 With overall height of 0.33 in., Model 3334A1 is suited for vibration testing where vertical space is limited. Miniature unit is available with sensitivity of 10 mV/g and features titanium housing, 5-40 mounting stud, and 5-44 radial connector. Hermetically sealed for operation in high humidity and dirty environments, accelerometer supports product response testing applications in addition to environmental stress screening.

Miniature IEPE Accelerometers suit HALT/HASS testing.

Dytran Instruments, Inc.    Chatsworth, CA 91311
Mar 12, 2012 Offering sensitivity of 10 mV/g and 500 g shock limit, Models 3030B4G and 3030B5G feature frequency response of 2 Hz and 5 Hz, respectively. Units are constructed of stainless steel and are hermetically sealed for reliable operation in high humidity and dirty environments. Both incorporate 10-32 axial connector and adhesive mounting capabilities.