Latest New Product News from ASG, Div. of Jergens, Inc.
Automatic Label Dispenser supports range of speeds, lengths.ASG, Div. of Jergens, Inc. Cleveland, OH 44110
Feb 05, 2013 Measuring 6.5 x 6.8 x 11 in. for placement on any workbench or assembly station, 9.04 lb LDX-130 increases productivity by automatically dispensing .169–5.1 in. labels while removing and discarding .169–5.1 in. wide backing material. Unit offers 10 feeding speed settings, built-in counter, and length adjustment programming. Requiring 110/220 V, 3 W power, dispenser accommodates 9.8 in. max label roll diameter and supports label lengths from .169–31.5 in.
Power Supply is intended for automation, PLC technologies.ASG, Div. of Jergens, Inc. Cleveland, OH 44110
Oct 05, 2012 Compatible with ASG TL-Series, Alpha Series, CL-Series, and SS-Series tools, PS-55AT features inputs for tool enable/disable and outputs for cycle complete as well as high and low speed settings. This single tool control power supply, when used with external monitoring device, offers ability to count quantity of finished batches and number of screws to be installed into single product. Solution is designed for use with automation and PLC-based applications.
Sequence Recognition System assures screw fastening conformity.ASG, Div. of Jergens, Inc. Cleveland, OH 44110
Jul 02, 2012 Designed to prevent defects in products before they are made, Sequence Recognition System monitors fastener tightening sequence and provides feedback to disable/enable tool based on pre-programmed characteristics if proper fastener sequence is not followed. System can discern between fasteners with 0.25 in. center to center distances and greater. When used with ASG Precision Fastening X-PAQ(TM) system, sequence recognition system ensures proper torque, sequence, and revolution tolerance is achieved.
Electric Torque Driver provides stable screw tightening.ASG, Div. of Jergens, Inc. Cleveland, OH 44110
Jun 29, 2012 Measuring 8 in. long with 1 3/8 in. diameter, HIOS Model BLG-4000 operates up to 1,000 rpm at 30 Vdc and provides torque range of 0.9-4.8 lbf-in. Unit features brushless motor, which ensure clean operation and minimizes heat generation. With anti-static plastic main body, driver minimizes electrical charge making it suited for assembly of precision instruments and electronic components.
Brushless DC Torque Drivers come in several configurations.ASG, Div. of Jergens, Inc. Cleveland, OH 44110
Jun 29, 2012 Available in lever start, push-to-start, and pistol grip models, TLB-C brushless DC torque drivers offer speeds from 350-1,000 rpm and either ¼ in. hex or 3/8 in. square drive depending on specific model. Use of brushless motor eliminates carbon dust and reduces heat generation, promoting clean operation and extended life. Models in Assembly Product Group - TLB-C203L, TLB-C419L, and TLB-C419P - feature anti-static plastic main body.
Screwfeeder can accommodate up to 11 different sized screws.ASG, Div. of Jergens, Inc. Cleveland, OH 44110
Dec 08, 2008 Featuring fully adjustable rail system, precision screwfeeder can hold 1.0, 1.2, 1.4, 1.7, 2.0, 2.3, 2.6, 3.0, 3.5, 4.0, and 5.0 mm screws. It feeds fasteners with less than 19 mm under head length, and can also accommodate screws with captive washers. Adjustable bit guide in automatic feeder allows use of most standard bits.
Pneumatic Screwdrivers deliver 22-115 lbf-in. of torque.ASG, Div. of Jergens, Inc. Cleveland, OH 44110
Jun 25, 2008 Featuring ergonomic design that provides operator comfort and gripping power, direct drive Torq2(TM) HDP Series is appropriate for soft draw applications, such as wood screws, self-tapping screws, or trim screws. Sculpted thermoplastic elastomer housings help deliver balanced, non-fatigue performance, while quick-change collet facilitates bit changing.
Torque Arm provides precise positioning of assembly tools.ASG, Div. of Jergens, Inc. Cleveland, OH 44110
Jun 10, 2008 Suited for vertical screw applications, Linear Torque Arm has linear slide that offers smooth motion for electric or pneumatic inline tools. Machined stainless steel and multiple ball bearing design with side-by-side slides provides stability for horizontal extension and retraction of tools up to 5 lb in weight and up to 150 lbf-in. torque. Arm movement is up/down, in/out, and full 360º radial side-to-side. Each arm is provided with 2 ASG 1-3 lb spring balancers.
Pneumatic Screwdrivers employ positive clutch design.ASG, Div. of Jergens, Inc. Cleveland, OH 44110
May 22, 2008 Available with torque ranges from 22-115 lbf-in, Torq2(TM) HPS Series pistol grip drivers are suited for soft draw applications such as wood screws, self-tapping screws, or trim screws. Operator controls torque of positive clutch tool by varying pressure applied to driver, and ergonomic design lends to operator comfort and gripping power. While sculpted thermoplastic elastomer housings promote balanced, non-fatigue performance, quick change collet facilitates bit changing.
Torque Arm helps minimize operator fatigue.ASG, Div. of Jergens, Inc. Cleveland, OH 44110
Mar 05, 2008 Used with pneumatic or electric inline drivers, Torque Arm limits operator influence on assembly process and helps absorb torque to minimize potential for operator injury to arm, wrist, or hand. Offering max reach of 30 in., arm accommodates tool weights up to 10 lb and max torques up to 100 lbf-in.
Click below for more Product News from ASG, Div. of Jergens, Inc.
Other Company News From ASG, Div. of Jergens, Inc.
May 07, 2014
Jergens, Inc., ASG and SGS Tool Company Hold Grand Opening Celebration for the New Jergens Shanghai Commerical Company, Ltd. Facility
May 22, 2013
ASG Announces Strategic Partnership with Fiam Air Tools
Mar 14, 2013
ASG Now Offers X-LEASE(TM) Financing Plans for X-PAQ(TM) Precision Fastening Systems
Jan 30, 2013
ASG Upgrades Models in the TLB-C Line of Brushless DC Electric Torque Drivers
Oct 02, 2012
ASG Announces X-GUARD(TM) Extended Protection and Maintenance Plans
Jun 15, 2012
ASG Announces X-PAQ(TM) Firmware Update and New Right Angle Tools
Jul 31, 2009
ASG to Display Torque Control Drivers and Other Products for Assembly at NEPCON South China
Dec 12, 2008
Extensive New Line of Industrial Pneumatic Tools Announced
Aug 15, 2008
ASG Joins STAFDA Trade Group
Apr 07, 2006
New Bit Magnetizer For Assembly Tools
|Home | My ThomasNet News® | Industry Market Trends® | Submit Release | Advertise | Contact News | About Us|
Brought to you by Thomasnet.com
Browse ThomasNet Directory|