Latest New Product News from VadaTech
FPGA Mezzanine Cards suit network interface applications.VadaTech Henderson, NV 89052
Jul 16, 2014 Offering high-speed interfaces with up to 40 GB speeds, network interface FPGA Mezzanine Card (FMC) series comprises cages for dual QSPF+, SPF+, and RJ-45 as well as some quad cage versions. Products meet VITA 57 specifications for FMCs, and front panel has dual sets of LEDs for USER0, USER1, and PRESENT. Along with dual QSFP+ ports for 40GbE/SRIO, PCIe, and Aurora, FMC108 features onboard dual re-driver that allows use of long copper cables.
AMC Processor Board supports 100G capabilities.VadaTech Henderson, NV 89052
Jul 07, 2014 Along with Cavium™ Octeon II CN6880 multi-core processor and Virtex-7™ FPGA, AMC738 features CFP2 front panel port that can utilize 4 x 25 Gbps lanes or 10 x 10 Gbps lanes. Board comes in double module, full size and offers several banks of DDR3 memory, Serial over LAN capabilities, and true hardware Random Number Generator. On-board SDHC socket is available for mass storage, and other front panel interfaces include dual RJ-45 and dual RS-232 ports.
AdvancedTCA Carrier Board holds 4 AMC modules.VadaTech Henderson, NV 89052
Jun 24, 2014 In addition to 10G managed Layer 2 switch with Xilinx® Virtex-7 FPGA, ATC133 10GbE Carrier features crossbar Switch (CBS) that allows any combination of backplane ports to be routed to FPGA. There are dual XAUI ports and dual GbE ports to each AMC slot. On-board PowerPC runs Linux OS, managing switch, loading FPGA image, and CBS. Also, carrier also routes up to 280 W to 4 full-size single or 2 double Advanced Mezzanine Cards (AMC) modules.
AMC Storage Module offers 12 Gbps transfer rate.VadaTech Henderson, NV 89052
Jun 12, 2014 Meeting AMC.1 specifications for use in MicroTCA and AdvancedTCA systems, Model AMC626 holds 2.5 in. drive for SATA II at 6 Gbps transfer rate or SAS-3 for 12 Gbps transfer rate. Module offers storage capacity of 900 GB per disk and includes Host Bus Adapter that allows storage data to transfer across fat pipe fabric, expanding from 2 dedicated SAS/SATA ports to x8 lanes across PCIe Gen 3. With RAID 0/1/1E/10 options, module provides striping, mirroring, and mirroring/block-level striping.
Mezzanine-Based Shelf Manager works with ATCA, MicroTCA systems.VadaTech Henderson, NV 89052
Jun 04, 2014 Fully backwards compatible with previous VadaTech product generations, VT003 provides quad-core, 1 GHz per core processor; 1 GB DDR3 memory; 32 GB Flash; and 8 GB NAND Flash. Mezzanine approach facilitates deployment on choice of carrier, while F-RAM for log messages promotes accelerated write performance, increased write/erase cycles, and minimized power consumption. Other features include dual 10/100 Ethernet ports, 3 RS-232 ports, and I²C RTC with battery back-up.
Digital-to-Analog Converter offers 14-bit at 2.5 GSa/sec.VadaTech Henderson, NV 89052
May 30, 2014 Supplied in FPGA Mezzanine Card format that conforms to VITA 57 specifications, Model FMC223 features TRIG Out, CLK In, and Analog Out, along with Multi-IO LVDS connector and status LEDs on front panel. Mezzanine offers 8, 16, 32, or 72 QAM for amplitude modulation, while RF Phased Locked Loop synthesizer provides optimized linearity and band flatness performance.
Data Processing Board routes 4 low latency signals to RTM.VadaTech Henderson, NV 89052
May 23, 2014 Supplied in double module, mid-size format, Model CM045 meets MicroTCA.4 specification with rear I/O interface. Board features 16 GB of DDR3 memory, 8 SFP+ ports via front panel, and Kintex-7 FPGA with x4 PCI Gen 3 signaling across fat pipes. Board is suited for several High Energy Physics applications such as cavity field stabilization and standing-wave linear accelerators, as well as other systems requiring high speed DSPs and low latency.
Carrier Hub enhances MicroTCA-based systems.VadaTech Henderson, NV 89052
May 06, 2014 Along with 40 GbE option, synchronous Ethernet, and advanced clocking/GPS capability, UTC004 MicroTCA Carrier Hub (MCH) provides PCIe Gen 3, SRIO Gen 2, and crossbar switch (CBS) option. Latter allows any fabric to be utilized, including custom solutions. Module enables flexible master/slave clock and time synchronization to multiple clocking standards, features quad PLL clock network synchronizer, and supports JTAG Virtual Probe for remote programming or debugging.
MicroTCA.4 Chassis solves power redundancy problem.VadaTech Henderson, NV 89052
Apr 29, 2014 Compliant with MicroTCA.4 specification, 8U Model VT813 is equipped with four 1,100 W power supplies in N+1 redundant configuration. By aligning power supplies on side of card cage, chassis can provide 12 double-module, mid-sized slots. Backplane for chassis is 40 GbE-ready, with high dielectric materials for clean signals. Unit includes dual fans trays in push/pull configuration, dual MCHs, dual FRU information devices and carrier locators, along with JTAG Switch Module slot and Telco Alarm.
FPGA Mezzanine Carriers feature AMC form factor.VadaTech Henderson, NV 89052
Apr 07, 2014 Supplied in single width size, FPGA Mezzanine Carriers come in versions that include Virtex®-5, Virtex®-6, Artix®-7, Kintex®-7, Virtex®-7 FPGAs and Zynq® All Programmable SoCs. Modules allow any VITA-57 compliant FMC mezzanines to be plugged in, providing variety of I/O options. Carriers include DDR3 memory, allowing large buffer sizes and queuing during processing. To eliminate potential single-point-of-failure in system, Virtex and Kintex versions have optional local processors.
Click below for more Product News from VadaTech
Other Company News From VadaTech
Jul 15, 2014
VadaTech Announces Express Development Platforms
May 05, 2014
NASA Uses MicroTCA Architecture for Space Network Ground Segment Sustainment Project (SGSS)
Apr 04, 2014
MicroTCA Chosen for Naval Rackmount System
|Home | My ThomasNet News® | Industry Market Trends® | Submit Release | Advertise | Contact News | About Us|
Brought to you by Thomasnet.com
Browse ThomasNet Directory|