Miniature Dual Load Switch features low on-resistance.

Advanced Power Electronics Corp    San Jose, CA 95118
May 23, 2013 Model APE8990-3 dual load switch has RDS(ON) of 20 mΩ and controlled turn on. Unit's two N-channel MOSFETS each support maximum current of 6 A and operate over input voltage range of 0.8–5.5V. Controlled by ON/OFF input interfacing directly with low voltage control signals, switch also includes 150 Ω load resistor and is available in 3 x 2 mm, 14-pin DFN package with thermal pad. Rise time is adjustable, to avoid inrush current, using external ceramic capacitor on CTx pin.

High-Voltage MOSFETs feature RDS(ON) as low as 0.19 ohms.

Advanced Power Electronics Corp    San Jose, CA 95118
May 23, 2013 Available in TO-220CFM through-hole package with high isolation capability and low thermal resistance between tab and external heat sink, Models AP11S60-HF-3, AP14S50-HF-3, and AP20S60-HF-3 serve as main switching devices for universal 90–265 Vac converter designs. Devices provide high blocking voltage to withstand voltage surges in demanding power systems, making them suited for PFC correction and PWM stages in servers, telecom rectifiers, PCs, and lighting systems.

Dual N- and P-Channel MOSFETS suit battery management applications.

Advanced Power Electronics Corp    San Jose, CA 95118
May 07, 2013 Suited for battery management and protection applications, Model AP9922GEO-HF-3 dual N-channel MOSFET features RDS(on) of 16 mΩ while model AP9923GEO-HF-3 dual P-channel unit has RDS(on) of 25 mΩ. Available in TSSOP-8 package, both products can operate with gate drive down to 1.8 V. Units are RoHS-compliant and halogen-free.

Ultra-LDO Linear Regulators suit high-current POL conversion.

Advanced Power Electronics Corp    San Jose, CA 95118
Apr 01, 2013 Designed to provide POL DC-DC conversion in board-level applications, Series APE8968MP-HF3 provides dropout of just 0.23 V at 3 A. Units require 2 supply voltages, one for control circuitry and another for main supply. Power-On-Reset circuit monitors both supply voltages to prevent incorrect operation. Available in ESOP-8 package, regulators include thermal shutdown and current limit protection, as well as POK that indicates output status with time delay that is set internally.

VFM Step-Up DC/DC Converter meets battery-powered system needs.

Advanced Power Electronics Corp    San Jose, CA 95118
Mar 21, 2013 Supplied in SOT-23-5L package, APE2902 can operate from positive input voltage between start-up voltage and VOUT and convert it to higher output voltage, adjustable in 0.1 V steps from 2.5–5 V with ±5% accuracy. Quiescent supply current of 22 µA typ and efficiency of 87% (typ) at VOUT = 5 V help maximize battery life. Along with max shutdown current lower than 1 µA and output current up to 100 mA, converter offers internally limited peak inductor current and internal soft-start.

Power MOSFET suits space constrained applications.

Advanced Power Electronics Corp    San Jose, CA 95118
Mar 14, 2013 Housed in TO-92 through-hole package, Model AP4002T is suited for low current applications such as small switch power supplies and load switches. N-channel enhancement-mode power MOSFET features BVDSS of 600 V, RDS(on) of 5 Ω, and  400 mA ID. Operating from -55 to 150°C, miniature device is RoHS-compliant and halogen-free.

Linear Voltage Regulator is optimized for accuracy.

Advanced Power Electronics Corp    San Jose, CA 95118
Nov 15, 2012 Available in fixed and adjustable output voltage versions, APU1205-3 series offers better than 2% initial voltage accuracy and dropout voltage of 270 mV at 300 mA or 170 mV at 150 mA. Quiescent current at shutdown is 5 µA, and other features include TTL-compatible enable/shutdown control input, current limiting, and thermal shutdown. Suited for handheld, battery-powered equipment, product comes in 5-pin, SMT, halogen-free, and REACH-/RoHS-compliant, SOT-23 package.

Controller IC is designed for on-board DC/DC conversion.

Advanced Power Electronics Corp    San Jose, CA 95118
Nov 15, 2012 Intended for on-board DC/DC converter applications with designs down to 1.8 V, APU3037-3 synchronous buck regulator features internal 200 kHz oscillator (400 kHz for the A version), UVLO for Vcc and Vc supplies, and external programmable soft-start function. IC comes in halogen-free, RoHS-/REACH-compliant package, operates with single 5 or 15 V supply in fixed frequency voltage mode, and has 500 mA peak output drive capability. Output under-voltage detection is also included.

MOSFETS offer switching speed and on-resistance.

Advanced Power Electronics Corp    San Jose, CA 95118
Oct 22, 2012 Supplied in SO-8 package that is halogen-free as well as compliant with RoHS and REACH environmental requirements for hazardous materials, AP9930GM-HF-3 quad complementary N- and P-channel enhanced-mode MOSFETs target full bridge applications such as servo and DC motors. Respective performance ratings for N- and P-channel devices include Drain Source Voltage (VDS) of 30 and -30 V, RDS(ON) of 33 and 55 mΩ, and Continuous Drain Current (I_D) of 5.5 and -4.1 A.

PWM Controllers feature space saving design.

Advanced Power Electronics Corp    San Jose, CA 95118
Oct 12, 2012 Housed in 8-lead, 3 x 3 mm DFN package, Model APE3061GN3-HF-3 supports input voltages from 3–24 V and is designed to drive external N-channel MOSFET. Output voltage is dependent on external N-MOSFET and is programmable using internal reference voltage of 1.0 V and external resistors connected as voltage divider. Using copper wire for internal wire bonding, Model APE3061AM-HF-3 supports input voltages from 3–24V, with oscillation frequency of 500 kHz and enable/shutdown function.

High-Speed Discrete IGBTs feature low saturation voltage.

Advanced Power Electronics Corp    San Jose, CA 95118
Sep 07, 2012 Suited for use in AC and DC motor control, home appliances, UPSs, solar inverters, and induction cookers, AP20GT60 series features collector/emitter voltage (VCE) rating of 600 V and peak gate emitter voltage rating (VGE) of ±20 V. Nominal models have saturation voltage, VCE(sat), rating @ Ic=20 A of 1.8 V and max power dissipation of 25, 125, or 104 W at 25°C. Corresponding models with internal diode and fast recovery diode feature VCEsat of 1.7 V at Ic=19 A or Ic=12 A or 1.8 @ Ic=20 A.