Latest New Product News from Doosan Infracore America Corp & Eng Center
Wedge Lock Coupler attaches to crawler excavators.Doosan Infracore America Corp & Eng Center West Caldwell, NJ 07006
May 19, 2014 Designed for use with company's 6–53 metric ton excavator models, Wedge Lock Coupler allows operators to change excavator attachments without need for additional hydraulics, but does not decrease machine's breakout force. Coupler has limited increase in tip radius over pin-on mounting. For jobsite safety, system's swing ear design and use of bolt retainer safety plate helps prevent attachments from falling.
Tier-4 Excavators deliver performance-driven lifting and digging.Doosan Infracore America Corp & Eng Center West Caldwell, NJ 07006
Oct 14, 2013 Respectively, 6.3 metric-ton DX63-3 (11.6 in. tail swing) and 8.5 metric-ton Doosan DX85R-3 (5.8 in. tail swing overhang) have operating weights of 13,779 and 18,960 lb and digs to depths of 13 ft 6 in. and 15 ft 6 in. Both come with blade float, multi-function joysticks, color instrumentation panel, Auto-Shift drive system, and rubber tracks. Both are powered by 59.4 hp, Tier 4-compliant diesel engine with high-pressure common-rail fuel injection system, DOC, and DPF.
Wheel Loader combines control, power, and iT4 compliance.Doosan Infracore America Corp & Eng Center West Caldwell, NJ 07006
Aug 27, 2012 With 69,655 lb operating weight, 58,450 lb breakout force, and 48,061 lb full-turn tipping capacity, DL550 suits material handling applications in quarries, mines, and manufacturing operations. This 7.5 yd³ wheel loader employs 380 hp with 6-cylinder diesel engine optimized for use with SCR and DEF to comply with interim Tier 4 (iT4) emission regulations. Operators can set upper/lower limits for lift arm and bucket stop positions from inside cab, and dump height is 11 ft 2 in.
Hydraulic Breaker can match frequency to ground conditions.Doosan Infracore America Corp & Eng Center West Caldwell, NJ 07006
Feb 29, 2012 To promote efficiency in demolition and rock-breaking applications, DXB260H features 2-speed control of breaker frequency for adjustment between short and long stroke settings. Product weighs 5,400 lb and delivers up to 600 blows/min. It is designed for use with excavators in 27-37 metric ton range. Rated in 8,000 lb-ft impact energy class, breaker requires hydraulic flow rate from 39.5-63.5 gpm. Features include cradle-mounted grease station and blank fire protection.
Vertical Machining Center delivers 123.6 lb-ft of torque.Doosan Infracore America Corp & Eng Center West Caldwell, NJ 07006
Jan 20, 2011 Equipped with 25 hp motor that generates up to 12,000 rpm at spindle, Model VC430 cuts deep into hard materials, holds tenths precision, and produces mirror finishes. Linear motion guideways and high-speed servomotors enable traverses of 1,574 ipm along X and Y axes and 1,259 ipm along Z axis. Constructed with 1-piece Meehanite casting, machine has 180° rotating pallet table; 40-station, double-arm magazine with 1.3 sec tool-to-tool times; and 66-gal coolant tank that is isolated from bed.
Vertical Machining Center fits in crowded shop floors.Doosan Infracore America Corp & Eng Center West Caldwell, NJ 07006
Dec 27, 2010 Featuring 86.7 x 87.2 in. footprint, Model DNM 400A handles parts up to 25.0 x 17.1 x 20.1 in. and 881 lb. Machine is powered by 15 hp spindle motor that drives ISO No. 40 taper tools at speeds up to 8,000 rpm, while delivering 52 lb-ft of torque. Rapid traverses are 1,181 ipm along all 3 axes. Equipped with 20-station, double-arm ATC, system changes tools in 1.3 sec. Big Plus dual-contact tooling system creates full contact along spindle taper and toolholder flange.
Turning Center targets oil-field applications.Doosan Infracore America Corp & Eng Center West Caldwell, NJ 07006
Aug 05, 2010 Providing 25.6 x 39 in. work envelope, Puma 480D features 10.8 in. through-hole diameter, 60 hp turning power, 3,293 lb-ft torque, and up to 6,102 lb Z-axis thrust. Wrap-around guideways are induction hardened, precision ground, and bonded with low-friction fluroplastic coating to minimize wear and dampen vibration. Power is supplied by 2-speed gearbox, generating spindle speeds up to 1,000 rpm. Employing 12.6 in. dia Curvic coupling, 12-station turret exerts 23,606 lb hydraulic clamping force.
Dual-Spindle Turning Center features rigid, structurally stable bed. .Doosan Infracore America Corp & Eng Center West Caldwell, NJ 07006
Jul 21, 2010 Puma 2600SY has structurally stable bed that absorbs low-frequency/high-amplitude forces of rapid acceleration/deceleration and vibration associated with heavy cuts. System has 24-position turret with 7.5 hp motor that turns live tooling at up to 5,000 rpm. Designed for parts with up to 14.8 in. dia and 29.9 in. long, unit also includes 35 hp spindle motor that generates speeds up to 4,000 rpm, while y-axis movement is achieved by linear interpolation and synchronous movement of X1 and X2 axes.
Other Company News From Doosan Infracore America Corp & Eng Center
Feb 09, 2011
Doosan Appoints National Sales Manager
|Home | My ThomasNet News® | Industry Market Trends® | Submit Release | Advertise | Contact News | About Us|
Brought to you by Thomasnet.com
Browse ThomasNet Directory|