Latest New Product News from Widia Inc.,
Turning Grades are designed for productivity, reliability.Widia Inc., Latrobe, PA 15650
Jan 18, 2013 Comprising 10 grades and 14 geometries, WIDIA™ Victory™ turning solutions promote productivity across steel, stainless steel, cast iron, and specialty alloy applications. Coating technologies lend to maximized wear resistance as well as speed and/or feed capabilities. To reduce depth of cut notching and extend tool life, additional post-coat treatment promotes cutting-edge toughness. Products are ground after coating to provide secure seating surface.
End Mill Pullout Protection System increases reliability.Widia Inc., Latrobe, PA 15650
Nov 27, 2012 Accommodating round-shanked cutting tools, SAFE-LOCK™ system by Haimer GmbH pull-out-protection and adapter system enhances security in heavy-duty cutting. Positive locking and concentric accuracy of less than 0.00012 in. increase process reliability, cutting tool life, and productivity. Helical grooves ground into tool shank, together with respective pin drivers in holder, prevent tool from spinning or being pulled out of holder under extreme machining conditions.
End Mill is designed for center cutting.Widia Inc., Latrobe, PA 15650
Nov 06, 2012 VariMill II ER™ end mill features eccentric relief with edge strength supporting high feeds and metal removal rates. SAFE-LOCK™, available on tools with greater than ½ in. dia, provides optimal stability while eliminating pull out. Unit is engineered with 5 unequally spaced flutes. It can be used for titanium or stainless steel machining and is capable of slotting, ramping, and plunging.
Milling Inserts have 12 cutting edges, anti-rotation feature.Widia Inc., Latrobe, PA 15650
Oct 23, 2012 Optimizing performance for roughing to semi-finishing applications, M200™ series includes 3 geometries designed for multiple milling tasks: ML for stainless steel and high-temp alloys; MM for general purpose milling, including steel; and MH for heavy applications, such as cast iron and high-strength steels. Available milling grades include WK15PM, WP25PM, WU35PM, and WP35CM, while internally cooled tool bodies come in screw-on, Weldon®, cylindrical, and shell mill styles.
High-Feed Milling Inserts work on range of materials.Widia Inc., Latrobe, PA 15650
Dec 27, 2011 Based on WIDIA-Hanita(TM) X-Feed(TM) geometry, WIDIA(TM) M270(TM) Series features 2 contact faces in V-shaped pocket design to promote secure, rigid insert clamping and accurate positioning. Grade TN2505(TM) exhibits wear resistance in materials to 60 HRc, TN6540(TM) exhibits additional toughness, and TN6525(TM) suits dry-machining applications in steel. Also available, WIDIA M370(TM) Series offers double-sided, high-feed concept with 6 cutting edges for steel, stainless steel, and cast-iron milling.
Multi-Purpose Drill works with wide range of materials.Widia Inc., Latrobe, PA 15650
Oct 14, 2011 Featuring advanced VDS point geometry, VariDrill(TM) minimizes chipping on cutting edge and delivers extended tool life across range of materials, including steels, stainless steels, cast irons, non-ferrous materials, and high-temperature alloys. Its point and flute design enables chips to roll smoothly, minimizing friction, heat, jamming, and scratching. Available in 3XD, 5XD, and 8XD lengths as well as coolant-through and solid options, VariDrill provides optimum hole finish.
Solid-Carbide Drills are optimized for deep hole applications.Widia Inc., Latrobe, PA 15650
Mar 30, 2011 Available with 15XD, 20XD, 25XD, and 30XD length ratios, WIDIA-Rubig(TM) deep-hole drills come in 3.0-13.0 mm diameters and do not require special drivers or guide bushings. Products can also be used in machining centers and are engineered to enhance material removal rate, hole quality, and cycle times. With 132° cone-point geometry, drills provide thrust and centering ability that lend to hole quality. Also, 4-margin design improves stability in cut.
Powder-Metal Taps are built for demanding applications.Widia Inc., Latrobe, PA 15650
Jun 28, 2010 Designed for precision tapping applications in steel and stainless steel, WIDIA-GTD(TM) HSS-E taps feature powder-metal substrate with high levels of cobalt content for optimal heat resistance and extended tool life. Manufactured to ANSI and DIN standards, taps feature precision h6 shanks for use with conventional tap holders with square drive or precision round tool holders. Choices include 15° left-hand helix for tapping through holes or 45° right-hand helix for blind holes.
Face Mill Inserts work with aluminum, non-ferrous materials.Widia Inc., Latrobe, PA 15650
Jun 04, 2010 WIDIA(TM) inserts for WIDIA Victory M1200(TM) face mill series are designed to provide optimal results in aluminum for milling operations. Also applicable to other non-ferrous materials, inserts come in 2 separate geometries - LDJ and LDJ3W - that both exhibit toughness and wear resistance and feature 12 cutting edges. LDJ geometry features optimized rake angles and is designed to be free-cutting, while LDJ3W wiper style geometry features 3 RH cutting edges and 3 LH cutting edges.
Drills combine benefits of modular and solid carbide tools.Widia Inc., Latrobe, PA 15650
Nov 06, 2009 Available over standard diameter range of 0.3150-0.8264 in., Victory TOP DRILL M1(TM) Modular Drills come in flanged-shank or round-shank configurations. Units feature solid coupling for consistent performance from insert to insert, and front clamping mechanism to facilitate insert changes. Inserts are offered with UP(M) geometry in grade K20FTiAlN, featuring application-oriented differentiated point design aimed at holemaking in steel and cast-iron components.
Other Company News From Widia Inc.,
Feb 20, 2013
"Extreme Challenges, Extreme Results" WIDIA Sponsors Ultra 4 Unlimited Class Racer
Jan 14, 2013
WIDIA and Partners Fastenal and Hi-Speed Corp. Join the Team
Dec 17, 2012
WIDIA Sponsors Ultra 4 Unlimited Class Racer. Car Owner/Driver/Builder also a WIDIA Distributor
May 19, 2011
WIDIA Products Group Named ISA 2011 American Eagle Award Winner
Nov 17, 2010
WIDIA(TM) Finalizes Brand-Migration Efforts - Consolidates MetCut(TM) and MetalRemoval(TM) Products
Mar 12, 2010
Free Reconditioning with WIDIA(TM) Solid-Carbide Drills
Feb 24, 2010
WIDIA Products Group Strategy Bundles World-Leading Brands into Powerful New Cutting-Tool Portfolio
Oct 21, 2009
WIDIA Products Group Announced
Oct 21, 2009
Bernie McConnell Named Vice President, WIDIA Products Group and Services
Oct 21, 2009
WIDIA Products Group Launches Interactive Website
Aug 01, 2009
Best-in-Class Face-Milling Performance with New M1200(TM) Milling Choices from WIDIA
|Home | My ThomasNet News® | Industry Market Trends® | Submit Release | Advertise | Contact News | About Us|
Brought to you by Thomasnet.com
Browse ThomasNet Directory|