RTLS Tag and Location System supports 2.4 and 5 GHz bands.

Redpine Signals, Inc.    San Jose, CA 95131-2019
May 09, 2013 Offering enterprise security for dense wireless environments, CCX certified WiSeMote™ WM1-50 includes location engine that delivers accurate locationing in beaconing with associated and CCX modes of operations. Tag family provides 2-way messaging and can also work with off-the-shelf access points for locationing through associated mode. In this mode, tags can work in Wi-Fi infrastructures with enterprise security using built-in 802.1X capability.

Wireless M2M Combo Chip fosters integrated connectivity.

Redpine Signals, Inc.    San Jose, CA 95131-2019
Feb 11, 2013 Suited for universal M2M communications applications, RS9113 M2MCombo™ chip integrates dual-band 802.11n Wi-Fi, ZigBee, and dual-mode BT 4.0 wireless connectivity. Self-contained solution accelerates product introduction by removing challenges involved in solving multiple wireless co-existence issues. It maintains connections on some or all interfaces, presenting virtual simultaneous multi-protocol connectivity that is key to fostering deployment in legacy and new wireless environments.

Wi-Fi RTLS Tags operate in 2.4 and 5 GHz bands.

Redpine Signals, Inc.    San Jose, CA 95131-2019
Apr 13, 2012 With features targeting enterprise and industrial markets, WiseMote(TM) WM1-20 (2.4 GHz) and WM1-50 (2.4/5 GHz) 802.11n Wi-Fi RTLS tag devices work with any third-party hardware and software RTLS infrastructure. Specific Wi-Fi features include enterprise security and single stream 802.11n operation. Supporting multiple location tracking and update mechanisms, devices can be programmed to operate in Cisco Compatible Extensions (CCX), Wi-Fi associated, and beaconing modes.

Self-Contained 802.11n WiFi Module serves M2M Markets.

Redpine Signals, Inc.    San Jose, CA 95131-2019
Jan 23, 2012 Fostering accelerated WiFi deployment, WiSeConnect(TM) provides feature set with Wi-Fi Direct(TM), Enterprise security, SEP 2.0, Embedded AP, and multiple host interfaces. Secure WiFi module is self-contained, with all hardware and software required for WiFi and regulatory compliance. Supplied in 35 x 22 mm package, product does not limit achievable WiFi throughput, operates with 3.3 V supply, and also comes in variants with single-band 2.4 GHz and dual-band 2.4/5 GHz operation.

Wi-Fi Chipset integrates in smartphone application processors.

Redpine Signals, Inc.    San Jose, CA 95131-2019
Dec 19, 2011 Addressing emerging markets for wire speed data transfers over wireless, Quali-Fi(TM) 802.11ac delivers Wi-Fi links on mobile devices under adverse RF environments. Product offers advanced beamforming, multi-user MIMO, LDPC, and flexible use of non-contiguous channels. Quali-Fi unit is accompanied by software framework that includes access point, Wi-Fi certified client, and Wi-Fi Direct(TM) functionality.

CCX-Compliant 802.11n Module supports WiFi® RTLS tags.

Redpine Signals, Inc.    San Jose, CA 95131-2019
May 05, 2009 Offered as 802.11n single stream solution for asset tracking, Find-iT(TM) provides all control and wireless functionality required to build and deploy tags for 2-way communicating real-time location systems (RTLS). It can connect to standard Access Points in open and secure modes and provides network stack that originates or terminates TCP/IP and UDP connections with IPv6/IPv4 capability. Low power module includes antenna, frequency reference, power management, and flashed-in firmware.

Wireless Sensor Module operates on one battery for 3 years.

Redpine Signals, Inc.    San Jose, CA 95131-2019
Feb 26, 2009 Based on Lite-Fi(TM) 802.11n technology, SenSiFi(TM) module (RS9110-N-11-31) provides all control and standards-compliant WLAN functionality with WPA2 security required to build and deploy wireless sensor nodes. It can collect full range of telemetry information through standard A/D sensor interfaces, and MCU implements embedded OS. Supplied in 31 x 44 mm QFN package, self-contained module also includes network stack that terminates TCP/IP and UDP connections with IPv6 capability.

Serial-to-Wireless Modules provide 802.11n connectivity.

Redpine Signals, Inc.    San Jose, CA 95131-2019
Feb 05, 2009 Operating in 2.4 GHz ISM band, serial wireless device server modules RS9110-N-11-21 and RS9110-N-11-22 provide industrial devices and other equipment with wireless connectivity to LANs without needing to install wireless networking software or network stack. They integrate Lite-Fi(TM) RS9110 chipset, integrated 802.11n SoC, RF transceiver, power amplifier, EEPROM, and external front-end components. Measuring 35 x 23 mm, modules support temperatures from -40 to +85°C.

Serial to Wi-Fi® Modules are suited for M2M communications.

Redpine Signals, Inc.    San Jose, CA 95131-2019
Jan 27, 2009 Serial wireless device server modules RS9110-N-11-21/22, based on Lite-Fi(TM) RS9110 chipset (802.11n SoC), operate in 2.4 GHz ISM band and have interfaces to coexist with other radios in same band. While -21 module provides secure WLAN connectivity to systems connected to network through serial interface running SLIP, -22 module is fully integrated device server with complete TCP/IP networking stack, web server, WLAN driver, 802.11 enterprise security, and WLAN protocol.

SiP Modules target battery-constrained mobile devices.

Redpine Signals, Inc.    San Jose, CA 95131-2019
Oct 16, 2008 Based on Lite-Fi(TM) RS9110 802.11n SoC, SiP Modules integrate RF transceiver, power amplifier, EEPROM, and external front-end components. Units connect directly to antenna on line side, and to host processor through choice of SDIO, SPI, and EBI interfaces. SDIO interface permits data throughput of over 30 Mbps. With internal processor handling WLAN protocol functions and offloading layer-3 functions from host, modules enable WLAN functionality with little extra load on host processor.