Flap Discs are designed for metal finishing applications.

Walter Surface Technologies    Windsor, CT 06095
May 02, 2013 Intended for overall removal, Enduro-Flex features ECO-TRIM backing made from base of natural and sustainable plant fibers; 5 in. disc with Grit 40 removes up to 2,500 g over its lifespan. Enduro-Flex Turbo, used for weld removal, edge breaking, and blending applications, has proprietary mixture of high content self-sharpening grains. Built-in Cyclone Technology, along with flap configuration, lets operators perform with cutting rate of grit 36 with finish of grit 60.

Cut-Off Wheel features true 1 mm thickness.

Walter Surface Technologies    Windsor, CT 06095
Jan 18, 2013 Designed for cutting metal thinner than gauge 14 or 5/64 in. thick, ZIP ONE consists of specially reinforced disc bonded with proprietary mix of abrasives that deliver cool cutting, and technology that enables optimal grit distribution throughout disc. Tool allows extremely precise cuts, without vibration and with low friction. Manufactured with iron-free mix, wheel is guaranteed not to contaminate stainless steel. 

Cleaners/Degreasers feature eco-friendly cleaning agent.

Walter Surface Technologies    Windsor, CT 06095
Jan 17, 2013 As aqueous-based micro-emulsion of NATURE BOOST vegetable extract-derived additive with surfactants, CB 100 removes oils and greases, ink, rubber marks, tar, wax, carbon, soot, and paste. Featuring NATURE BOOST additive in its undiluted form, GS 200 green solvent removes glue, ink, paint, sealant, wax, oils, and greases. Bio-Circle ULTRA, formulated from Bio-Circle L solution and NATURE BOOST additive, removes crude oil, bitumen, heavy grease, and baked-on contaminants.

Weld Cleaning System offers alternative to toxic methods.

Walter Surface Technologies    Windsor, CT 06095
Sep 28, 2012 Replacing mechanical abrasion and pickling paste with electrolyte solution, SURFOX produces consistent finish on stainless steel. Unit pumps conductive electrolyte solution through application pad, which simultaneously cleans and passivates part at 3–6 fpm. Internal circuitry provides steady current, so cleaning unit has no down-time. Using illuminated panel to display numeric value of passivation on surface, passivation tester enables workers to evaluate quality of weld cleaning.

Flap Disc suits metal finishing applications.

Walter Surface Technologies    Windsor, CT 06095
May 30, 2012 Featuring cloth and abrasive composition, ENDURO-FLEX delivers consistent surface finish on steel, stainless steel, aluminum, and other alloys. Patented backing can be trimmed down, adding longevity to product. Five inch disc with Grit 40 is capable of removing up to 2,500 g over lifespan.

Finishing Disc is designed for working with metals, alloys.

Walter Surface Technologies    Windsor, CT 06095
May 25, 2012 Used for finishing steel and stainless steel as well as aluminum and other alloys, ENDURO-FLEX features design and flap configuration with cloth and abrasive composition. Disc produces consistent surface finish, and backing can be trimmed down in order to increase operational longevity. Latter results in decreased disc changeover requirements as well as reduced waste. With Grit 40, 5 in. disc removes up to 2,500 g over its lifespan.

Durable Flap Disc is designed for extended wear.

Walter Surface Technologies    Windsor, CT 06095
May 17, 2012 Designed for extended life and to minimize changeovers, ENDURO-FLEX finishing disc has flap configuration with cloth and abrasive composition. Backing can be trimmed down, adding longevity to product. Design promotes consistent surface finish and material removal; 5 in. disc with Grit 40 removes up to 2,500 g over its lifespan. Suitable areas of use include finishing steel and stainless steel, aluminum, and other alloys.

Rust Removal Agent offers non-toxic solution.

Walter Surface Technologies    Windsor, CT 06095
Apr 04, 2012 BIO-RUST is non-corrosive, biodegradable solution that eradicates rust on iron and mild steel. It is comprised of chelating agents that work to detach iron oxide from steel and is VOC-, solvent-, and phosphate-free. Non-flammable solution does not require special storage or disposal procedures and it can remove 2.2 lbs of iron oxide per 20 L of liquid. It can be used to clean steel prior to painting or coating operations as well as in mechanisms in transportation and military sectors.

Surface Cleaner/Degreaser offers alternative to toxic solvents.

Walter Surface Technologies    Windsor, CT 06095
Jan 02, 2012 Used in place of acetone or toluene for preparation/cleaning of metallic surfaces prior to treatment, AF-CLEAN is non-flammable, biodegradable, and formulated with minimal VOCs. It cleans and prepares metallic surfaces prior to painting, priming, coating, gluing, corrosion protection, as well as cleaning molds for plastic injection. Liquid is available in 10 L bag-in-box and 208 L drum, and aluminum bottles can be filled and refilled via Walter Air Force automatic refilling station.

Weld Cleaning System offers non-toxic alternative.

Walter Surface Technologies    Windsor, CT 06095
Sep 01, 2011 Able to clean stainless steel at rates from 3-6 fpm without toxic pickling pastes, SURFOX employs conductive application pad that simultaneously cleans and passivates parts. System produces flawless finish on stainless steel and mirror-like finish on chrome. It offers controlled dispersion of cleaning fluid and supports Surfox H and T electrolyte cleaning solutions for standard and heavy-duty jobs. Passivation tester, stainless steel grade ID tester, and marking kits are included.