Latest New Product News from Sensirion Inc.
Pressure Sensors measure mass flow in bypass configuration.Sensirion Inc. Westlake Village, CA 91361
Feb 01, 2013 Operating on principle of calorimetric flow measurement, CMOSens® Differential Pressure Sensors provide optimal sensitivity and accuracy, even at low pressure differences below 1 Pa. Model SDP601 is intended for direct threaded connection to pressure manifold with O-ring sealing, while Model SDP611 is designed for tube connection. Providing digital I2C output, both sensors are fully calibrated, temperature compensated, and free from zero-point drift.
Humidity and Temperature Sensor measures 2 x 2 x 0.8 mm.Sensirion Inc. Westlake Village, CA 91361
Oct 11, 2012 Designed for mobile devices, SHTC1 is based on CMOSens® Technology that lets sensor and signal processing electronics be combined on one silicon chip. Sensor operates from 1.8 V supply and measures humidity from 0%–100% RH with ±3% RH typ accuracy as well as temperature from -30 to +100°C with ±0.3°C typ accuracy. Fully calibrated and suitable for reflow soldering, product comes standard with digital I²C interface.
Digital Mass Flow Meter has low pressure drop design.Sensirion Inc. Westlake Village, CA 91361
Jun 28, 2012 With flow channel that achieves pressure drop of less than 3 mbar through sensor element, SFM3000 bi-directionally measures flow of air and other non-aggressive gases at rates to 200 slm. Performance of SFM3000 gas flow sensor is based on CMOSens® Technology, which combines sensor element, signal processing, and digital calibration on one microchip. Internally linearized and temperature compensated, 14-bit digital signal is output at 2 kHz update rate.
Humidity And Temperature Sensor is designed for high production volumes.Sensirion Inc. Westlake Village, CA 91361
May 23, 2012 SHT20 humidity and temperature sensor features typical accuracy of 3% RH, temperature measurement accuracy of ±0.4°C, and measuring range of -40 to +120°C. Using CMOSens® technology, full calibration and both digital and analog interfaces, sensor features compact 3 x 3 mm footprint and 1.1 mm profile.
Digital Differential Pressure Sensors consume minimal power.Sensirion Inc. Westlake Village, CA 91361
Nov 17, 2011 Promoting long-term battery operation, SDP606 and SDP616 enter sleep mode after each measurement and wake upon Measure command. Each operates with currents no greater than 400 µA and consume less than 1 µA in sleep mode. Fully calibrated and temperature compensated, sensors have digital I²C output and use calorimetric flow measurement principle. While SDP606 is intended for direct threaded connection to pressure manifold with O-ring sealing, SDP616 is designed for tube connection.
Compact Digital Temperature Sensor suits low-power applications.Sensirion Inc. Westlake Village, CA 91361
Oct 07, 2011 Designed exclusively for temperature measurement, STS21 comes in 3 x 3 mm DFN package to accommodate space-limited applications. Fully calibrated product provides digital output and delivers ±0.22°C accuracy over 5 to 60°C range. Pin- and protocol-compatibility with SHT21 humidity sensor enables swap-out in situations where temperature measurement is required and humidity measurement is optional.
Digital Differential Pressure Sensors feature low ranges.Sensirion Inc. Westlake Village, CA 91361
Aug 29, 2011 Respectively, SDP6x0-125Pa and SDP6x0-25Pa feature measurement ranges of -125 to +125 Pa and -25 to +25 Pa and zero point repeatability that reaches 0.05 Pa and 0.03 Pa. Both sensors are fully calibrated and temperature compensated and offer zero point accuracy of 0.1 Pa. Suited for applications in medical and HVAC markets, products have digital I²C output and utilize principle of calorimetric flow measurement for optimal sensitivity and accuracy.
Liquid Flow Sensor serves low-volume dosing applications.Sensirion Inc. Westlake Village, CA 91361
Jul 11, 2011 Able to detect flow rates below 120 mL/min for hydrocarbon-based liquids, SLQ-QT105 offers ~40 msec measurement response time and sensitivity for flow rates down to 3 mL/min. Detection of air bubbles in µL range is also possible, and all wetted materials are made from PTFE or quartz glass. Flow is measured without moving parts and non-invasively through wall of straight flow path. Features include fittings for 4 x 3 mm PFA tubing, digital interface, and RS485 communication.
Micro Flow Switch detects bubbles in low flow liquids.Sensirion Inc. Westlake Village, CA 91361
Jun 01, 2011 Based on digital MEMS chip, Model LG01 detects liquid flows down to 0.25 ml/min with max flow rate up to 220 ml/min, output signal of 0 or 5 V, and response time below 100 ms. Fluidic connections can be made via ¼-28 standard fittings, suitable for connecting plastic tubing with O.D. of 1/8 or 1/6 in. Chemical resistance and bio-compatibility are ensured by non-invasive measurement through wall of straight, 1.8 mm dia internal glass capillary and fluidic connectors made of PEEK(TM) plastics.
DP Sensor Evaluation Kit connects directly to computer.Sensirion Inc. Westlake Village, CA 91361
May 02, 2011 Offered as USB stick that connects to SDP610 sensor via adapter cable, EK-P3 enables testing of digital differential pressure (DP) sensors of SDP600 series. With available online software, DP sensor can be tested under realistic conditions by following 5 installation steps. Included software allows display of measured values on screen and also enables export of data to Excel spreadsheet.
Click below for more Product News from Sensirion Inc.
Other Company News From Sensirion Inc.
Feb 17, 2012
Humidity and Temperature Sensor for Mobile Devices
Aug 01, 2011
Sensirion Moves into a New Production Building in Switzerland
Jun 01, 2011
SHT21 Humidity Sensor Features Improved Temperature Specs
Mar 01, 2011
Sensirion Newly Certified to Environmental Standard ISO 14001
Nov 01, 2010
Sensirion Wins "Entrepreneur of the Year®" Award
|Home | My ThomasNet News® | Industry Market Trends® | Submit Release | Advertise | Contact News | About Us|
Brought to you by Thomasnet.com
Browse ThomasNet Directory|