Servo-Controlled Winder targets mid-speed, mid-width markets.

Davis-Standard, Killion Specialty Systems    Pawcatuck, CT 06379
Apr 28, 2011 Designed for coated paper, film, and non-woven products, SurfaStart 1000 can slit and wind rolls of material up to 120 in. wide into shippable rolls up to 60 in. in diameter at speeds up to 1,000 fpm. System incorporates stationary knife transfer system, bump-less primary-to-secondary winding transitioning system, and programmable tension and nip control. Slitter mandrel, spreader roll, core accelerator, drum, primary arm indexing, and transfer knife positions are all servo controlled.

Multilayer Die maximizes barrier film production versatility.

Davis-Standard, Killion Specialty Systems    Pawcatuck, CT 06379
Dec 07, 2010 Designed to produce blown film structures from 5-9 layers, ProCone multilayer die has stackable mandrel arrangement that allows vertical movement of mandrels within die stack. Design also allows for angular movement of mandrels relative to each other, and interchangeable modules allow switching for higher/lower rates or special resins as required. Manufactured in sizes from 2-12 in., die is targeted to developmental machines and narrow width lines for web widths to 60 in.

Blown Film Surface Winder handles up to 60 in. dia rolls.

Davis-Standard, Killion Specialty Systems    Pawcatuck, CT 06379
Jul 16, 2010 Available in widths from 44-134 in., AC-driven SLC (SLiding Carriage) Series employs pneumatic cylinders for controlling winding force and is capable of winding rolls on 3 or 6 in. cores. Finished roll unloading system is independent from winding transfer cycle sequence, while roll carts and shaft handling are available to add automation. Other features include horizontal flat bed design, touch screen controls for winder settings, and 2 center slitters for multiple lane production.

Extruder Feedsection adjusts automatically.

Davis-Standard, Killion Specialty Systems    Pawcatuck, CT 06379
Oct 29, 2009 Available for retrofit to existing 3½ in. Davis-Standard extruders, Hinge-Roll Feedsection offers uniform, consistent feed rate and adjusts automatically based on feed strip size. Feedroll and interior of feedsection are accessible by unfastening 2 swing bolts and lowering attached swing-down cartridge by means of electro-mechanical cylinder. Belt drive eliminates lubrication requirements and belts automatically loosen for feedroll removal.

Control System targets blow molding applications.

Davis-Standard, Killion Specialty Systems    Pawcatuck, CT 06379
Mar 25, 2009 Available for retrofit to existing systems, MACO 6500RSE supports Wonderware 8.0 and Windows® XP Professional, which communicate with PLC over 2 separate servers. System offers set point change log to track changes made by operators, SPC program to continuously track 34 items each cycle, and recipe save function to verify names and eliminate potential for lost recipes. Closed loop synchronous shoot/fill, adaptive speed control, and PLC ladder logic can be viewed in real-time.

Surface Winder handles rolls up to 140 in. wide.

Davis-Standard, Killion Specialty Systems    Pawcatuck, CT 06379
Mar 24, 2009 Capable of winding film in widths from 80-140 in. with single or dual winder configuration, PAC 60 uses center shaft support for 3 in. cores to wind multiple slit rolls to 30 in. OD, while 40 in. rolls are wound on 6 in. shafts. It comes with motorized roll cart and shaft puller fully integrated into PLC-based controller, which reduces operator lifting of shafts and promotes winding automation. For stretch film, lay-on roll eliminates air and improves film relaxation prior to winding.

Converting Machinery incorporates pelletizing technology.

Davis-Standard, Killion Specialty Systems    Pawcatuck, CT 06379
Mar 24, 2009 Black Clawson machinery is available with multiple pelletizing features, such as air ring pelletizing system that enables cutting of materials that should not come into contact with water quench media or those with low heat removal requirement. Also, debottlenecking retrofits are available to increase production capacity utilizing X model version. Pelletizer die plate design promotes throughput rate proportional to die plate orifice holes.

Control Systems target extrusion machines.

Davis-Standard, Killion Specialty Systems    Pawcatuck, CT 06379
Mar 23, 2009 Featuring coordinated one-line drive control, DS-eTPC delivers temperature control of up to 8 barrel heating/cooling zones per extruder. With Historian option, touch-panel controller can be connected to any PC running Internet Explorer® so that temperature profiles, drive conditions, and pressure conditions can be saved in report format for future analysis. REACT System enables conditions at customer's plant to be viewed remotely during production run via secure, high-speed Internet connection.

Roll Stand System offers multiple extrusion capabilities.

Davis-Standard, Killion Specialty Systems    Pawcatuck, CT 06379
Mar 23, 2009 At 40 in. wide, XP Express® is offered with technology for producing sheet with hundreds of layers. It can be equipped with coextrusion die, feedblock, and layer multiplier as well as special adaptor piece for injecting atmospheric gas for foam applications. XP Express PS (packaging sheet) and CS (custom sheet) models are available for in-line thermoforming of PP, APET, and PS and may also be equipped for extrusion processes involving EVA, TPA, and vinyl acetate copolymers.

Surface Winders can roll materials in diameters up to 60 in.

Davis-Standard, Killion Specialty Systems    Pawcatuck, CT 06379
Feb 08, 2008 PAC 50 winders feature compact hydraulic system that uses high-speed digital electronics for lay-on pressure control, which reduces blocking at core. They also feature device to bring new core up to speed prior to transfer as well as integrated, motorized shaft hoist system. Touchscreen controls are mounted on pendant and systems include ac digital drives and center assist drives. Shafts are available in 3 and 6 in. sizes.