LED Lighting Retrofits install in minutes.

LEVITON    Melville, NY 11747
May 06, 2013 Virtually maintenance-free, Zipline LED Platinum Series installs in existing linear fluorescent fixtures, provides more than 50,000 hours at LM80,  and complies with DLC efficiency standards. Modular units are available in 2 x 4 and 2 x 2 versions, offering 5,700 lumens at 60 W and 3,400 lumens at 37 W, respectively. Integrated pre-wired drivers and array holders mount into housing using pressure-fit technology. For added efficiency, both versions are dimmable using Renoir® II lighting controls.

Revenue-Grade Submeters suit commercial, industrial applications.

LEVITON    Melville, NY 11747
May 03, 2013 Suited for 3-phase/3-wire and 3-phase/4-wire circuit applications, VerifEye™ Series 3300 and 3500 are 0.5% accuracy-class kWh/demand meters that offer universal voltage performance and enable tracking, monitoring, and verification of real-time energy usage. Series 3300 meter uses RS-485 and Modbus RTU integration for configuration to BACNet MS/TP building automation system networks, while Ethernet-enabled Series 3500 provides configuration for Modbus TCP/IP building automation systems.

Power Packs feature fail-safe design.

LEVITON    Melville, NY 11747
May 03, 2013 Offered in 4 models, OPP20 Power Packs assure circuit activation in power failure and emergency conditions. Units surpass NEMA 410 16 Amp ballast overload testing and exceed 1.5 million switching cycles at full load. Installed inside or outside fluorescent ballast cavity or junction box, power packs are suitable for daylight harvesting, occupancy sensing control, and bi-level and manual switching applications. Devices are CA Title 24 compliant and meet ASHRAE 90.1 Plug Load Control requirements.

Submetering Solutions track tenant energy usage.

LEVITON    Melville, NY 11747
Apr 05, 2013 Revenue-grade VerifEye™ solutions – submeters, communication products for data translation, and software options – enable turn-key tenant billing implementation. Functionality enables tracking, monitoring, and verification of real-time energy usage, providing precise data for billing or reducing operating costs. Energy managers can identify how and where energy is being used throughout facility, from individual circuit-level to tenant-occupied spaces and major building systems loads.

Electric Vehicle Charging Station provides up to 40 A.

LEVITON    Melville, NY 11747
Mar 18, 2013 Providing up to 40 A of continuous power at 240 Vac with 9.6 kW output, Evr-Green™ 400 charges any SAE J1772™ compatible electric vehicle. Integrated connector dock simulates gas station nozzle experience, while 25 ft charging cable provides flexibility for mounting locations. Housed in watertight NEMA Type 4 steel enclosure with thermoplastic cover, station features cord connected installation. Unit meets and exceeds UL, CSA, and NEC requirements along with FCC Part 15 for residential use.

Medical-Grade Power Strips can be used in patient-care areas.

LEVITON    Melville, NY 11747
Mar 13, 2013 Intended for use in health care facilities, Medical-Grade Power Strips are UL 60601-1, UL 60950-1, and UL 1363A compliant and include surge-protective models that conform to UL 1449 third edition requirements. Locking safety covers prevent accidental contact with unused outlets, and switchless design prevents accidental disruption of power. Configurations are available with 2, 4, or 6 hospital grade outlets and with 7 or 15 in. supply cord lengths with hospital-grade attachment plugs.

USB Charger features tamper-resistant receptacle.

LEVITON    Melville, NY 11747
Jan 24, 2013 Offering 2.1 A of charging power, USB Charger with 20 A/125 V Tamper-Resistant Receptacle can charge 2 USB-powered electronic devices, leaving receptacle free to power devices requiring higher currents. USB ports are Type A, 2.0/3.0 and incorporate smart chip, which recognizes and optimizes charging power of device plugged in. Engineered to fit in standard wallbox, charger uses standard wallplate and can be multi-ganged with any standard Leviton wiring device.

Motion Sensors manage lighting and motor loads.

LEVITON    Melville, NY 11747
Aug 13, 2012 Available in Automatic-ON Occupancy or Manual-ON Vacancy switching, Motion Sensors can control LED, CFL, fluorescent, incandescent, halogen, or motor loads. Using passive IR detection technology to monitor room for occupancy through segmented lens, sensors provide 180° field of view and 900 ft² coverage. Time delay setting lets user delay lights/motor load from automatically switching OFF for 30 sec, 5 min, 15 min, or 30 min. Dimming Sensor is available for LED, CFL, and incandescent bulbs.

Linear Fluorescent Fixture Retrofit streamlines installation.

LEVITON    Melville, NY 11747
May 17, 2012 Used to retrofit existing lighting fixtures for use with energy efficient lamps, Zipline(TM) fluorescent lighting retrofit bypasses need to install and wire ballast and socket components separately. Solution combines 9 components into 2 modules, fits most 2x2 and 2x4 troffers, and comes in 2- and 3-lamp configurations. Ballast and lampholders are integrated into one unit that installs using 2 screws per side, and optional snap-in reflectors are available.

Home EV Charging Station targets next gen electric vehicles.

LEVITON    Melville, NY 11747
Apr 30, 2012 Providing up to 32 A at 240 Vac, Evr-Green(TM) 320 Level 2 Home Charging Station cuts charging time of SAE J1772(TM) compatible electric vehicles. Weatherproof NEMA Type 4 steel enclosure supports cord connected installation when used with Pre-Wire Installation Kit or can be converted to hard-wired installation. Station is also available with 18 or 25 ft charging cable. For safety, station has ground monitor circuit and built-in communication to verify proper connection before charging can commence.