Silicone Potting Compound features UL 94 VO rating.

Henkel Corporation    Rocky Hill, CT 06067
May 15, 2013 Designed to ensure integrity of electrical components by sealing against corrosion and outdoor contaminants, Loctite® SI 5640T offers strong adhesion to plastics and resists 85°C/85% RH aging conditions. Two-part, self-leveling compound is flame retardant when applied in thicknesses as low as 6 mm. Gelling in 5 minutes, product offers 30 Shore A hardness and elongation greater than 100%. Applications include electrical meters, signage/displays, HVAC components, solar panels, and LED lighting.

Flexible Structural Adhesive bonds dissimilar substrates.

Henkel Corporation    Rocky Hill, CT 06067
Dec 05, 2012 Suited for structural assembly of truck/trailer bodies, specialty vehicles, and wind turbine components, general-purpose Loctite® UK 1366 B10™ withstands expansion/contraction caused by temperature fluctuations. Impact strength and flexibility result in bond lines that withstand stress, vibration, and movement without failure. Resistant to moisture/humidity, nonflammable, 2-part polyurethane adhesive works on aluminum, PVC, polycarbonate, stainless steel, ABS, and galvanized steel.

Instant Adhesives withstand humidity, temperatures to 200°F.

Henkel Corporation    Rocky Hill, CT 06067
Nov 30, 2012 Comprised of low-odor, low-bloom adhesives, Loctite® 403™/408™/455™/460™ minimize frosting near bond line and provide bond strengths of 2,600 psi on dry or acidic surfaces. Loctite 403 medium-viscosity cyanoacrylate adhesive fills gaps to 0.008 in.; water-thin, wicking grade Loctite 408 fill gaps as small as 0.002 in.; low-viscosity Loctite 460 works on close-fitting parts with gaps up to 0.004 in.; and Loctite 455 non-drip gel, intended for porous surfaces, fills gaps to 0.010 in.

Casein-Based Labeling Adhesives are zinc- and borax-free.

Henkel Corporation    Rocky Hill, CT 06067
Nov 26, 2012 Eticol labeling adhesives are based on natural polymers obtained from casein, minimizing wastewater produced by bottlers and maximizing shelf life and quality of products. Flexible, water-based bottle labels maintain bond on moist and cold surfaces and also in presence of condensation on glass. They are available in variants with high wet tack and ice-water resistance, and can be used with high-speed labeling machines.

Mold Release Agents and Sealers help produce polyurethane foams.

Henkel Corporation    Rocky Hill, CT 06067
Nov 26, 2012 Loctite® Frekote® PU7000™ is designed for open cell or gloss surface foams, while PU7001™ release agent and PU7200™ mold sealer are suited for flexible polyurethane or semi-rigid polyurethane foams. Spray applied at temperatures from 95-149°F are thermally stable to 450°F and dry in 30 sec when exposed to ambient moisture at 110°F. Solvent-based polymers offer low mold buildup and minimal transfer during production of polyurethane foams and thermoplastic resins, coatings, and films.

High-Temperature Adhesives fixture in 15 seconds or less.

Henkel Corporation    Rocky Hill, CT 06067
Sep 28, 2012 Intended for high-speed assembly processes, Loctite® Instant Adhesives cure rapidly on dry or acidic surfaces and maintain bond strength in operating temperatures up to 250°F. Products include medium-viscosity Loctite 401™, water-thin Loctite 406™, low-viscosity Loctite 495™, and Loctite 454™ non-drip gel. Cyanoacrylates bond to variety of substrates including steel, aluminum, ABS, PVC, polycarbonate, nitrile rubber, chromate-plated parts, paper, balsa wood, and more.

Sprayable Anti-Spatter Coating protects welding equipment.

Henkel Corporation    Rocky Hill, CT 06067
Aug 28, 2012 Designed for use on manual and automatic MIG/MAG welding, laser/plasma cutting, and spot welding equipment, Loctite® SF7900(TM) Ceramic Shield prevents spatter adhesion for up to 8 hr with one application. Silicone-free coating dries in seconds, allowing continuous, uninterrupted welding throughout shift. By protecting shroud from spatter and allowing uninterrupted gas flow, coating helps optimize quality of weld seam. No chemical cleaners are required as weld spatter can be swept up with brush.

Two-Part Acrylic Adhesive bonds low surface energy plastics.

Henkel Corporation    Rocky Hill, CT 06067
Aug 20, 2012 Packaged in 50 or 400 ml cartridge that ensures accurate 1:1 mix ratio upon dispense, Loctite® 3035(TM) Polyolefin Bonder stores at room temperature and fixtures to plastics and metals in less than 15 min without surface preparation or primers. Product achieves optimal bond strength on PP, PE, HDPE, LDPE, ABS, and nylon. Offering environmental resistance, adhesive is suited for manufacturers of appliances, ATVs, outdoor power equipment, plastic pipes, storage tanks, and watercraft.

Instant Adhesives offer high temperature resistance.

Henkel Corporation    Rocky Hill, CT 06067
Jun 26, 2012 Surface insensitive Loctite® 401(TM)/406(TM)/454(TM) fixture in 15 sec or less and retain bond strength at operating temperatures to 250°F. Medium-viscosity/general-purpose, water-thin wicking, and non-drip gel formulations are available. Low odor and low bloom Loctite® 403(TM)/408(TM)/455(TM)/460(TM) maintain bond strength in high-humidity environments while delivering temperature resistance to 200°F. They are available for gap filling, wicking, bonding porous surfaces, and bonding close-fitting parts.

Threadlockers achieve No. 1 safety rating.

Henkel Corporation    Rocky Hill, CT 06067
Feb 07, 2012 Designed for locking and sealing threaded fasteners, Loctite® 2400NA(TM) and 2700NA(TM) have MSDS health rating of 1 and are formulated to enhance occupational health and safety by eliminating allergic skin, CMR, and Prop 65 hazards. Loctite 2400NA Blue Threadlocker has medium-strength, general-purpose formulation intended for use on fasteners from ¼-¾ in. dia. Loctite 2700NA Red Threadlocker offers high-strength, general-purpose formulation for use on fasteners up to ¾ in. dia.