Connector-Less Contact System optimizes lateral PCB alignment.

AVX Corp.    Myrtle Beach, SC 29578
May 07, 2013 Suited for linear LED lighting applications, coplanar 70-9159 horizontal contact system absorbs X- and Y-axis assembly tolerances and provides gold-to-gold active contact interface. Contacts remove insulator from connection solution, enabling LEDs to be placed in center of PCB and contacts to be individually placed on its outer edges. Contact height is 1.2 mm above PCB to prevent shadowing, and contacts may be individually spaced to support any voltage rating with 5 A current rating.

Open-Ended Card Edge Connectors support LED strip lighting.

AVX Corp.    Myrtle Beach, SC 29578
May 06, 2013 Designed without plastic end-walls to minimize length, 00-9159 Series features double-sided configuration for high-density pin count, central keying rib for alignment, and tin-to-tin contact interface. Miniature units measure 1 mm in length/number of contacts and are available with 4, 6, 8, or 10 contact positions. Models with 4 and 6 positions are rated at 3 A, while 8- and 10-position models are rated at 2.5 A. Supporting 1.6 mm PCB thicknesses, 300 Vac connectors operate from -40 to +125°C.

Varistors exhibit peak current up to 2,000 A.

AVX Corp.    Myrtle Beach, SC 29578
Apr 30, 2013 Available in 0201–2220 SMT case sizes as well as with radial and axial leads, TransGuard® Series has 3.3–85 Vdc working voltage range. AEC-Q200-qualified TransGuard® Automotive Series, offered in 0402–2220 SMT case sizes as well as with radial leads, has 5.6–85 Vdc working voltage range, multi-strike capability, and 1 nS response to ESD strikes. Both series are based on zinc-oxide varistor technology and feature high-energy, monolithic multilayer construction.

Ultra-Broadband Capacitors exhibit X7R characteristics.

AVX Corp.    Myrtle Beach, SC 29578
Apr 15, 2013 Rated at 50 Vdc from -55 to +125°C and compatible with various attachment processes, GX03 Series addresses DC blocking from 16 KHz to 40 GHz in applications such as semiconductor data communications, receiver optical subassemblies, transimpedance amplifiers, and test equipment. Orientation-insensitive ultra-broadband capacitors, available with Ni-Sn and Ni-Au terminations, feature 0603 case size and utilize precision thin film termination process to minimize board space requirements.

MLO Diplexers support several wireless standards.

AVX Corp.    Myrtle Beach, SC 29578
Feb 19, 2013 Based on multilayer organic high-density interconnect technology, 0805 MLO™ Diplexers support WCDMA, CDMA, WLAN, and GSM standards. Units feature max power capacity of 4.5 W and temperature range of -40 to +85°C. Measuring 0.083 x 0.050 x 0.021 in., diplexers are available in 4 frequencies and 2 terminations of Au and Ni/Sn, both of which are compatible with automatic soldering technologies. Units are suitable for band switching in dual and multiband systems.

MLC Capacitors suit high-voltage automotive applications.

AVX Corp.    Myrtle Beach, SC 29578
Feb 11, 2013 With working voltage of 1,000–3,000 V, Skycap® High Voltage AR Series is suited for automotive electronics as well as power supply decoupling and filtering. Conformally coated, radial-leaded units with X7R dielectric offer capacitance values from 470–68,000 pf with tolerances of ±5%, ±10%, ±20%, and +80%-20%. Capacitors are fully qualified to AEC-Q200 specification and come in 2 sizes of AR21 and AR30.

RF-DC, RF-RF SMT Crossovers enable low-profile PCB design.

AVX Corp.    Myrtle Beach, SC 29578
Feb 01, 2013 Supporting frequencies up to 6 GHz, X2A Series RF-DC Crossovers and X2B Series RF-RF Crossovers utilize MLO™ technology that matches CTE of PCB material and provides low loss across RF spectrum. Miniature crossovers provide designers with low-profile alternative to PCB vias and coaxial jumper cables in applications wherein critical RF circuit trace intersects DC or RF circuit. Both series come in 2020 case size LGAs and are rated from -55 to +85°C.

Wire-To-Board Capped IDCs facilitate termination process.

AVX Corp.    Myrtle Beach, SC 29578
Dec 03, 2012 Available in end-stop and through wire configurations, 9175 and 9176 Series of insulation displacement connectors (IDCs) have one-piece design that lets users insert discrete wires into cap without stripping them first. Pressing plastic cap down provides secure, gas-tight termination. Respectively, 9175 and 9176 Series feature current ratings of 1 and 10 A per contact and voltage ratings of 150 and 300 Vac and terminate 26–28 AWG and 18–24 AWG wires.

Stacked MLC Capacitors incorporate High K Super X7R dielectric.

AVX Corp.    Myrtle Beach, SC 29578
Nov 30, 2012 Available in SMM3, SMM4, and SMM5 styles, Super X7R SMM (switch mode max capacitance) capacitors feature 50–500 V range, 0.56–120 µF capacitance, and -55 to +125°C operating range. Lead options provide effective mechanical decoupling of ceramic capacitors from board, minimizing stresses during board flexing, vibration, or temperature cycling. Applications include high-power DC/DC converters, general/hybrid power supplies, telecom networks, snubbers, and aerospace instrumentation panels.

Multilayer Chip Inductors serve high-frequency applications.

AVX Corp.    Myrtle Beach, SC 29578
Sep 11, 2012 Designed for impedance matching, RF chokes, and high frequency filters, LCMC Series offers Q values from 6-42 typ as well as range of stable and accurate inductances from 0.3-164.0 nH. Products operate, depending on model, from 100 MHz to 2.4 GHz and are rated for use from -40 and +85°C. Supplied in standard miniature 0201, 0402, and 0603 chip sizes, multilayer chip inductors offer tight tolerances of ±5%, ±10%, or ±0.3 nH.