Slitting/Milling Tool Holders feature taper integrated design.

Genevieve Swiss Industries, Inc.    Westfield, MA 01085
Jan 31, 2013 Designed to direct mount to any ER 16 collet holder using standard ER nuts, Ti-Loc SwissClamp Slitting and Milling Tool Holders extend micro endmills closer to workpiece and eliminate inaccuracies caused by tolerance stacking. Typical TIR is held to .0002 in. or better. Arbors are available for 5 mm, 8 mm, ¼ in., and 5/16 in. ID saws, and Micro Endmills Extensions will be available to hold 3 mm, 4 mm, 1/8 in., and 3/16 in. shanks. Installation requires twist and snap into any ER clamping nut.

Saw Arbors suit CNC Swiss machining applications.

Genevieve Swiss Industries, Inc.    Westfield, MA 01085
Dec 21, 2011 Furnished in shank and hub configuration, GenSwiss Saw Arbors accommodate small live tool positions such as ER11 collet. Ultra Precision Combination Arbors provide added flexibility to hold extra tool such as end mill, drill, engraving tool, or spot tool. Made to gauge quality standards with hardened and ground hub mount, GenSwiss Ultra Precision Saw Arbors offer run-out less than .0001 in. TIR. Nut design applies gripping pressure on outside edge, eliminating eccentricity from high spots.

Coolant Through Tool Holders optimize Swiss type machining.

Genevieve Swiss Industries, Inc.    Westfield, MA 01085
Aug 24, 2011 Featuring delivery through shank, Coolant Thru Tool Holders optimize insert lubrication and cooling and extend tool life. Interchangeable coolant orifice plates at insert top level enable exact control over coolant volume, pressure, and velocity. Insert pocket conforms to 80°, 55°, and 35° ISO style turning inserts, while coolant inlet uses NPT fittings, eliminating use of solid coolant delivery lines. Available in ½ and 5/8 in. square shank sizes, holders withstand pressures to 10,000 psi.

Swiss Clamp System aids in ER collet clamping.

Genevieve Swiss Industries, Inc.    Westfield, MA 01085
Apr 25, 2011 EZR Swiss clamp system is available with EZR Swiss clamp nuts, EZR wrench adaptor, EZR torque nut adaptor, and spanner wrench. System eliminates wrench slippage and losing clamping nuts in machine sump/chip bin. Standard box wrenches or 3/8 in. drive ratchet wrench with either EZR wrench adaptor or EZR torque adaptor help in tightening clamp nuts.

Micro Grooving Tools cut channels to human hair thicknesses.

Genevieve Swiss Industries, Inc.    Westfield, MA 01085
Oct 29, 2010 Able to handle prototype as well as production work, UTILIS® Multidec® 1600 series is comprised of micro grooving and turning tools ground from premium carbide grades. Turning tools, designed for small Swiss machines, cut .0019-.108 in. thick grooves with .0004 in. repeatability. Products meet design and production requirements of micro medical devices, dental implants, electronic, and other micro components utilizing micro grooving.

Thin Grooving and Micro Turning Tools have long-life design.

Genevieve Swiss Industries, Inc.    Westfield, MA 01085
Nov 12, 2009 Ground from premium carbide grades for optimal tool life, UTILIS® Multidec 1600 series is capable of work under .125 in. dia utilizing insert widths from .0019-.108 in. thick with cutting edge repeatability within .0004 in. Geometries can be used for front turn, back turn, micro threading, and cut-off work. Full radius grooving and turning tools are offered in standard increments as well. Available with various coatings, tools accommodate holder shanks down to 7 mm.

Cutting Oils suit Swiss type machining applications.

Genevieve Swiss Industries, Inc.    Westfield, MA 01085
Jul 09, 2009 Designed for soft and hard metal applications, Swiss Silver cutting oils eliminate wax-like buildup on machine's slide surfaces that can catch chips that create abrasion, loss of accuracy, and machine maintenance. All formulations are clear, and low viscosity results in less fluid use, less fluid carry out on parts, and less chance of tolerance change as machine oil temperature increases. Swiss Silver can be used with high-pressure delivery systems.

Turning Tool helps locate micro-boring bars in holder.

Genevieve Swiss Industries, Inc.    Westfield, MA 01085
Nov 09, 2007 Multidec® MICRO-BORE System incorporates angled back that locates bar less than .0004 in. against a positive location pin in bar holder. Solid carbide bars range in size from 1-8 mm, and have thru-coolant capability. Suited for small parts precision machining in medical applications, system provides high quality internal machining operations, including chamfering, spotting, threading, ID grooving, and internal profiling. Different coatings are available to suit application requirements.

Rotary Broach Head helps accelerate machine setup.

Genevieve Swiss Industries Inc.    Westfield, MA 01085
Feb 21, 2007 Model 2160 features no center indicating, which facilitates setups for CNC Swiss-type machines and gang style lathes. With 1.1 in. head dia and length of 2.42 in., product can withstand 2,200 lb of push force and fits into tight tooling areas without loosing adjacent ID stations. Size also permits use in limited-space sub-spindle applications. Each holder has extended shank, eliminating need to add bushing while reducing vibration and promoting rigidity and tool life.

Turning Insert is available in front and back turning styles.

Genevieve Swiss Industries, Inc.    Westfield, MA 01085
Dec 01, 2006 UTILIS® AG Multidec® Swiss Made turning inserts provide repeatability of less than .0004 in. for turning work 1 in. dia and below. Utilizing chipbreaker design for efficient chip flow, OD turning inserts feature holding system with dual screw clamping and 3-point insert location that provides rigidity and accuracy. They are suited for titanium and 300 series stainless and other difficult materials common in aerospace and medical applications.

Rotary Broach Head suits limited-space applications.

Genevieve Swiss Industries Inc.    Westfield, MA 01085
Oct 02, 2006 Designed for CNC Swiss-type and gang style lathes, PCM® 2160 eliminates need to indicate broach to center and thereby facilitates setups. Product, which measures 1.1 in. in dia and 2.42 in. long, is suited for sub-spindle applications. Each holder has extra long shank, eliminating need for bushing and minimizing vibration. Capable of withstanding 2,200 lb of push force, broach head is offered with shank sizes of 16, 20, 22, and 25 mm as well as 5/8, ¾, and 1 in. dia.

Floating Reamer Chuck achieves .009 in. true orbital float.

Genevieve Swiss Industries Inc.    Westfield, MA 01085
Oct 02, 2006 Designed for Swiss Type lathes, Floating Reamer Chuck can move parallel off center up to .009 in., and can be used in live tool spindles as well as static ID positions to ensure accuracy of small holes. Design prevents reamer from breaking by aligning tool with drilled hole. Spring-loaded bearing ensures reamer always returns to center. ER-8 Style comes in shank sizes of 8, 10, 20, and 22 mm as well as ¾ and 1 in., while ER-11 Style comes in 10 mm, 22 mm, and ¾ in shank sizes.