Bandpass Filters target 4G WiMAX/LTE handsets.

Avago Technologies    San Jose, CA 95131
Aug 30, 2010 Based on Film Bulk Acoustic Resonator technology, Models ACPF-7024 and ACPF-7025 enable cellular phones to offer simultaneous operation of 4G WiMAX/LTE voice communications and WiFi/Bluetooth data networks without compromising QoS. Designed for use in 2.4 GHz ISM1 band, ACPF-7025 WiFi/Bluetooth model features over 40 dB of attenuation to interfering signals, while 2,496-2,690 MHz WiMAX Model ACPF-7025 allows WiMAX transceiver to coexist and operate alongside WiFi and/or Bluetooth transmitters.

Sigma-Delta ADC offers working insulation voltage up to 1,140 V.

Avago Technologies    San Jose, CA 95131
Aug 30, 2010 Suited for current and voltage sensing in motor control and power generation applications, Model ACPL-C797 features -40 to +105°C operating temperature, 5 and 3.3 V compatible digital outputs, gain accuracy of ±1%, and ±10% accurate clock frequency. By implementing digital filter in FPGA, ASIC, or DSP, serial output is decoded to 12-bit effective resolution. In addition, isolation amplifier features 78 dB SNR and minimizes EMI with slew rate controlled output.

Fiber Optic Short Link Transceiver offers optimal galvanic isolation.

Avago Technologies    San Jose, CA 95131
Aug 27, 2010 Occupying 13 x 33.56 mm footprint, 10 MBd HFBR-3810Z is suited for isolating frequency inverter and power converter applications in renewable energy installations. Fiber Optic (FO) short link technology pin-to-pin distance of 24.96 mm provides transient voltage suppression of 12 kV according IEC 60664-1. It also allows galvanic isolation on one PCB, promoting compact designs. DC coupled data link does not require data encoding or digitizing circuitry, and receiver has CMOS/TTL output.

Band 7 Duplexer targets 4G/LTE handset development.

Avago Technologies    San Jose, CA 95131
Aug 27, 2010 Supplied in 2.0 x 2.5 x 0.95 mm RoHS 6-compliant package, ACMD-6007 Film Bulk Acoustic Resonator (FBAR) duplexer is compatible with 2.0 x 2.5 mm duplexer PCB footprints. It enables manufacturers to build handsets for 4G/LTE standard that are optimized for quality of voice service and battery life. While 2.1 dB max insertion loss in transmit channel minimizes current drain from power amplifier, 2.5 dB receive channel insertion loss improves receiver sensitivity and dynamic range.

Low-Noise Amplifier suits cellular, LTE base stations.

Avago Technologies    San Jose, CA 95131
Aug 27, 2010 Supplied in 2.0 x 2.0 x 0.75 mm SMT QFN package, MGA-635P8 operates from 2,300-4,000 MHz and can be used in various of cellular applications. Noise figure is 0.56 dB, 0.75 dB max, at 2,500 MHz, and output third-order intercept, is 35.9 dBm at 2,500 MHz while operating from 5 V with 56 mA bias current. Built on 0.25 micron, GaAs Enhancement-mode pHEMT, product offers built-in active bias circuitry, adjustable operating current, and consistant gain of 18 dB.

Low Noise Amplifiers suit cellular and LTE base stations.

Avago Technologies    San Jose, CA 95131
Jun 28, 2010 Offered in 8-lead, 2.0 x 2.0 x 0.85 mm, SMT QFN packages, RoHS-compliant low noise amplifiers (LNAs) are offered in 1,500-2,300 MHz and 2,300-4,000 MHz versions for base station RF front-end design. At 1,900 MHz and typical operating condition of 5 V/51 mA, GaAs Enhancement-mode pHEMT process technology gives noise figure of 0.48 dB and third order intercept (OIP3) of 35 dBm. At 2,500 MHz and 5 V/56 mA, noise figure is 0.59 dB, and OIP3 is 35 dBm.

Miniature 3 W LED suits solid-state lighting applications.

Avago Technologies    San Jose, CA 95131
Jun 28, 2010 Supplied in 6-leaded SOP measuring 5 x 4 x 1.85 mm, ASMT-Jx33 series is available in Cool White (80 CRI), Neutral White, and Warm White (90 CRI). Each 3 W LED, featuring Pb-free construction compliant with RoHS standards, can be driven to up to 700 mA and offers viewing angle of 140° to meet color uniformity demands. Delivering flux output of 70 lm at 350 mA, products have max allowable junction temperature of 135°C and offer 16 kV ESD resistance.

3 W LED Emitter suits solid-state lighting applications.

Avago Technologies    San Jose, CA 95131
Jun 25, 2010 Model ASMT-Ax3x Power LED emitter has viewing angle of 140°, suitable for backlighting of advertising displays, channel letters, and contour lighting. Flux output is up to 113 lumens at 350 mA driving current and unit features maximum allowable junction temperature of 135°C. Encapsulated in heat- and UV-resistant silicone compound, it features thermal resistance of 10°C/W as well as ESD resistance of 16 kV. Its electrically neutral heat pad allows arrays to be connected on common heat sink.

Digital Optocoupler offers high data rates, insulation voltage.

Avago Technologies    San Jose, CA 95131
Jun 25, 2010 Intended for power supply and motor control applications, single-channel ACNV2601 provides 10 MBd data rates as well as 7,500 Vrms/1 min isolation voltage, 1,768 Vpeak continuous working insulation voltage, and 12,000 Vpeak transient over voltage. Internal shield between AlGaAs LED and photo-detector ensures 20,000 V/µs common-mode transient immunity with common-mode voltage of 1,500 V. Operating from 5 V supply, product also provides reliable logic interfacing and I/O buffering.

SMT RF Chipset targets point-to-point radio markets.

Avago Technologies    San Jose, CA 95131
Jun 25, 2010 Covering 38 and 42 GHz bands, SMT/WSD chipset integrates into point-to-point backbone radios. It includes high-directivity power detector in 0402 wafer scale package, up-converter with variable gain amplifier for 24 dB gain control, and 20 dB power amplifier with 1 W output. Buffer and multiplier, as well as low-noise receiver/down-converter (with noise figure under 4.5 dB), are also included. Chip packages measure 5 x 5 mm and are shipped in tape and reel.