Magnetic End-of-Arm Tooling replaces vacuum cups.

Industrial Magnetics, Inc.    Boyne City, MI 49712
Mar 22, 2013 Offered in Standard, Non-Rotating (NR), Destacking (DS), Double-Acting (DA), and Extra-Strong (ES) configurations, Transporter® LP magnetically transfers metal blanks, stampings, and parts in automated applications. Rare Earth magnets positively hold part during transfer, even during unexpected loss of shop air. Designed to directly replace vacuum cups with minimal tooling adjustments, products increase options for pick-up points on stamped, perforated, and odd-shaped parts.

Magnetic Separator suits flexible-hose, pneumatic line systems.

Industrial Magnetics, Inc.    Boyne City, MI 49712
Oct 01, 2012 With inlet and outlet installed to flexible hose system, 4JIT Bullet® allows dry powder and granular materials to pass through magnetic housing and be purified of metal contaminants. Access to magnetic circuit is achieved by opening tri-clover clamp on housing and removing lower body to clean collected tramp metal. Featuring 100% stainless, 2-part body, separator is available for 3, 4, and 5 in. line sizes; operates leak-free at up to 130 psi; and is suitable for use in explosive environments.

Pneumatic Line Housing provides magnetic separation.

Industrial Magnetics, Inc.    Boyne City, MI 49712
Aug 10, 2012 Intended for dilute-phase pneumatic systems, Self-Cleaning Pneumatic Line Housing protects processing machinery from tramp metal damage. Unit incorporates series of 1 in. dia rare-earth tubes on staggered centers, ensuring that all product flowing through housing makes repeated contact with magnets. Operational in horizontal or vertical orientation, sealed unit eliminates line pressure drops and surges, is leakproof to 15 psi, and is suitable for processing dry, powder, and granular materials.

Permanent Rare Earth Lift Magnet offers remote on/off control.

Industrial Magnetics, Inc.    Boyne City, MI 49712
Jul 05, 2012 Featuring MagSwitch(TM) technology, DynamicLift(TM) lets operator turn magnet on/off using remote control without requiring air or electricity. Internal on/off release device does not contact or damage surface of part being lifted, and integrated sensor ensures load will not be released unless it is at rest. By requiring specific release button sequence, remote eliminates concerns over accidental one-push load release. Ratings include heat resistant to 180°F and 600 lb max lift capacity.

Magnetic End-of-Arm Tooling offers BSPP fitting.

Industrial Magnetics, Inc.    Boyne City, MI 49712
Jun 04, 2012 Engineered with Rare Earth magnets, Transporter® LP Tooling transfers metal blanks, stampings, and parts in automated station-to-station, press-to-press transfer, and robotic pick-and-place applications. Magnets directly replace vacuum cups with minor tooling adjustments and can be installed to existing air connections on tooling booms or robotic face plates. Seven different products in 3 in. diameter Transporter LP line are available with 3/8 BSPP fitting.

Welding Magnet combines welding square and ground.

Industrial Magnetics, Inc.    Boyne City, MI 49712
Apr 10, 2012 Featuring Magswitch® technology, On/Off Multi-Angle Welding Square and Ground is suited for welders that need accurate holding and precise placement of steel sheet stock, plate, and tubing. Heat-resistant up to 180°F, multi-purpose tool offers common welding angles of 45, 176, 75, 90, 105 and 135°, plus 300 A welding ground. To use, welder places square against work pieces in desired holding position and turns handle to ON position, activating magnet.

Magnetic Separator is available with antimicrobial coating.

Industrial Magnetics, Inc.    Boyne City, MI 49712
Apr 10, 2012 Available with MAGnanoSHIELD®-coated tubes, RotoDrawer(TM) rids ferrous metal from powder and bulk processed products that have difficult flow characteristics and tendency to bridge/choke when using stationary, tube style magnets. FDA-compliant antimicrobial coating from General Magnaplate offers 99.9999% microbe resistance to bacteria and fungus. Motorized, cylindrical configuration of Rare Earth magnetic tubes continually rotate through gravity fed product stream.

Magnetic Pull Test Kits are offered in two styles.

Industrial Magnetics, Inc.    Boyne City, MI 49712
Dec 06, 2011 Supplied in hard case, 12 piece Pull Test Kit includes various ferrous test pieces, air gap spacers, polarity tester, Magna View green sheet, ruler, and hand-held or digitally calibrated scale. Magnetic pull strength testing can be performed on magnets with round or flat surfaces and on either permanent or electromagnetic circuits. Kits may be used as part of regular QC program or to compare 2 similar looking magnetic devices.

Permanent Lift Magnet features remote-operated design.

Industrial Magnetics, Inc.    Boyne City, MI 49712
Nov 21, 2011 Featuring MagSwitch(TM) technology, DynamicLift(TM) can be turned on/off using remote control, without need for air or electricity. Rare Earth lift magnet works on flat or round surfaces, and contains internal on/off release device that does not contact or damage part being lifted. For operator safety, magnet is equipped with sensor that will not allow it to release unless load is settled on surface. Battery-powered product is heat resistant up to 180°F and provides 600 lb lift capacity.

Pivoting Magnetic Welding Tool facilitates steel setup.

Industrial Magnetics, Inc.    Boyne City, MI 49712
Oct 04, 2011 With adjustable, locking handle and marked detents every 45° for accuracy, Pivoting Welding Angle lets welders set up and hold steel in angles from 22° to 270°. Magswitch® On/Off technology eliminates effects of magnetic field during setup while also promoting placement precision and non-marring hold on workpiece. Tool offers work holding capability on 3 sides of each magnet, with 200 lb holding value, and accommodates flat or round steel.