Bluetooth Modules target wireless medical devices.

Laird Technologies    Chesterfield, MO 63017
Apr 30, 2013 Based on Nordic Semiconductor nRF51822 SoC, BL6000 Bluetooth Smart™ Modules support variety of ultra-low power saving modes to achieve as little as 1 µA power consumption in deep sleep mode and 10.5 mA when transmitting data at 0 dBm. Each BL600 module version – with integrated antenna, IPEX MHF4 antenna connector, or trade pads for external antenna – has 19 x 12.5 mm footprint. Modules can connect to external sensors via I2C, SPI, UART, ADC, and GPIO interfaces.

Thermoelectric Modules convert waste heat to power.

Laird Technologies    Chesterfield, MO 63017
Feb 25, 2013 Available in 33, 90, and 130 mW models, eTEG Series consists of thermoelectric power generators that harvest waste heat and convert it to usable DC output power. Miniature devices are assembled with thin film semiconductor material, thermally conductive aluminum nitride ceramics, and gold-plated wire bondable pads. With output voltages from 0.6–2.5 V in open circuit at maximum temperature differentials, modules are suited for wireless sensors, LED lighting, and battery charging applications.

Radio Modules support Android 2.3 Gingerbread.

Laird Technologies    Chesterfield, MO 63017
Jan 14, 2013 Along with support for dual-band 802.11n (802.11a/b/g/n) and Bluetooth 2.1, Summit 40 Series offers secure and reliable connectivity in 2.4 and 5 GHz frequency bands, accelerated roaming between access points, certified Cisco Compatible Extensions v4 support, and facilitated configuration/management using Summit Client Utility. Latter also supports Bluetooth profiles. Software is available for Android 2.3 Gingerbread, Linux kernel v2.6.37, and Windows Embedded Handheld and Compact 6/7.

Surface Mount Grounding Contacts protect electronic devices.

Laird Technologies    Chesterfield, MO 63017
Jan 10, 2013 Designed for on-board grounding solutions, SMD Grounding Contacts provide protection for range of high-performance electronic devices. These 50+ standard SMD Grounding Contacts, made from beryllium copper, reduce and control noise in electronic applications. Different shapes and heights suit situations where large gaps must be bridged and low compression force is required. RoHS-compliant design features standard finish of gold over nickel; other options are available.

Air-To-Air Thermoelectric Assemblies cool outdoor enclosures.

Laird Technologies    Chesterfield, MO 63017
Dec 17, 2012 Using impingement flow and custom thermoelectric modules to transfer heat, AA-250 Outdoor Cooler Series cools battery back-up systems susceptible to degradation when exposed to elevated temperatures or provides heat when exposed to very cold temperatures. Open-loop products, which come in 24 or 48 V configurations, do not require any maintenance and may be mounted in vertical or horizontal orientation. Optional control of airflow direction on cold side is available.

Thermal Gap Fillers feature silicone-free design.

Laird Technologies    Chesterfield, MO 63017
Dec 12, 2012 Offered in variety of thicknesses to suit virtually any need, Tflex™ SF800 features thermal conductivity of 7.9 W/mK, while Tflex™ SF200 offers thermal conductivity of 1.8 W/mK or 2.0 W/mK, depending on thickness. Silicone-free gap pads are naturally tacky on both sides and require no additional adhesive coating. In addition, SF200 is available with differential tack for assembly and rework. Applications include automotive, consumer products, medical devices, and laser equipment.

Power Generators convert waste heat to usable output DC power.

Laird Technologies    Chesterfield, MO 63017
Nov 30, 2012 Able to regulate voltage and store power, Thermobility™ Wireless Power Generators are suited for powering wireless sensors, low-power LEDs, or trickle charge batteries where heat source is readily available. These self-contained, thin film thermoelectric power generators can be used in remote or mobile settings where hard line is difficult to install. Available models include WPG-1 for up to 1 mW output power and WPG-1S for up to 50 mW output power.

Thermoelectric Generators convert waste heat into DC power.

Laird Technologies    Chesterfield, MO 63017
Nov 30, 2012 Able to harvest waste heat and convert into usable output DC power, eTEG Series is assembled with thin film semiconductor material, thermally conductive aluminum nitride ceramics, and gold-plated wire bondable pads. There are 33, 90, and 130 mW models, which offer output voltages from 0.6–2.5 V. Sold-state reliability and maintenance-free operation make units suitable for replacing energy storage devices or providing power in remote places where access to power line does not exist.

Wireless Module features switchable antenna output.

Laird Technologies    Chesterfield, MO 63017
Oct 18, 2012 Available in 2 maximum conducted output powers of 125 mW and 50 mW, RM024 Range-Amplified MultiPoint Wireless Module features FHSS protocol for optimal interference and multipath immunity. Client/server architecture allows for more than 16 million clients to be addressed and communicating within network. Backward compatible with LT2510 module, RM024 is suitable for machine-to-machine applications, sensing and control networks, and long-range, low-bandwidth digital signage.

Liquid to Air Heat Exchangers offer capacities from 500-5,000 W.

Laird Technologies    Chesterfield, MO 63017
Oct 18, 2012 Featuring self-contained design, WL Series removes heat from densely packed electronic environments that are not conducive to conventional heat sink fans. Units circulate water or water with glycol and run on AC voltage. Suited for medical and industrial markets, heat exchangers can maintain peak performance of high powered X-ray scanning systems by keeping X-ray generator and tube cool, and can extend life of machine tools used in CNC machining for fabricating metals.