Variable Area Flowmeter performs under extreme conditions.

Brooks Instrument    Hatfield, PA 19440
Apr 30, 2013 Able to be used regardless of application, process configuration, or flow rate, armored MT3809 is constructed of stainless steel and performs in conditions common to chemical, petrochemical, oil and gas, and LP gas applications. Unit works across -320 to +780°F range and at pressures to 20K psi, delivering 2% FS/1.6 VDI accuracy in applications measuring gases, liquids, and steam. Explosionproof housing is standard, and flameproof option is available for IIC/Class 1 Division 1 locations.

Mass Flow Controller aids semiconductor manufacturers.

Brooks Instrument    Hatfield, PA 19440
Apr 30, 2013 Insensitive to pressure transients, Model GF135 provides real-time integral rate-of-decay flow measurement. Data can be used to optimize accuracy at critical low-flow set points, set up alarm limits for critical performance parameters, and monitor trends for predictive maintenance. With advanced diagnostic capabilities that verify accuracy, check valve leak-by, and monitor sensor drift, semiconductor manufacturers can maintain uniformity in etch profiles and critical dimensions.

Thermal Mass Flow Controllers offer sub 1 sec settling times.

Brooks Instrument    Hatfield, PA 19440
Dec 15, 2011 Offering configurable platform based on modular architecture, Models GF40/GF80 are suited for gas flow measurement and control applications. Units feature corrosion-resistant Hastalloy sensor tube for stability, independent diagnostic/service port, and valve technology that provides minimum leak-by and maximum turndown. MultiFlo(TM) technology gives users ability to reconfigure controllers for new gas and range without removing device from gas line.

Rotameter is available with low flow option.

Brooks Instrument    Hatfield, PA 19440
Nov 02, 2011 Model MT3809 armored rotameter is capable of measuring flow rates as low as 5 L/hr of air and 0.08 L/hr of water. Suitable for high pressure, high temperature applications where safety is a concern, they provide ± 2% full scale flow accuracy and are capable of measuring process fluid temperatures to 300°F and handle pressures to 6,000 psig. Its 316 stainless steel indicator housing is able to withstand corrosive atmosphere applications.

Instrumentation Software controls up to 30 mass flow meters.

Brooks Instrument    Hatfield, PA 19440
Oct 04, 2011 Together with BSI tabletop hardware module, Smart Interface Model 0260 Software provides control and monitoring capabilities in laboratory and research environments for thermal mass flow meters and controllers. Users can display setpoint, full-scale flow rate/measured flow rate, and device and alarm status as well as change valve override status. In addition, program enables data logging, batching, blending, and creation of automated process recipes.

ATEX-Approved Pressure Transmitters resist corrosion.

Brooks Instrument    Hatfield, PA 19440
Jul 28, 2011 Designed with 316L stainless steel and chromium-enriched wetted flow path, SolidSense II® Pressure Transmitters operate with virtually all process fluids. Active digital temperature compensation enables repeatable pressure measurement in industrial plants and applications exposed to wide variations in temperature. In combination with ATEX and Factory Mutual compliance, accurate measurements make transmitters suitable for demanding processes.

Variable Area Flow Meters suit gas and water applications.

Brooks Instrument    Hatfield, PA 19440
Jul 22, 2011 Constructed of 1-piece clear acrylic, Series 2500 features flow ranges of 4 ccm to 20 gpm for water and 40 ccm to 4,000 lpm for air. Rod-guided float provides stable, accurate flow measurement, while hex head connections enable installation without damaging meter. Offering accuracy ranges from 2-5% with 2-5 in. scale, depending on model, flow meters provide direct reading air or water scales in English or Metric and can be configured with various control valve, fitting, and O-ring options.

Glass Tube Flow Meters include integral needle valves.

Brooks Instrument    Hatfield, PA 19440
Jul 20, 2011 Equipped with rotating lens that allows 180° magnified view, Sho-Rate(TM) 1250/1255 are suitable for displaying on panels and cabinets. Model 1250 is available in 65 mm scale lengths and provides 10% accuracy for liquids and gases, while Model 1255 comes in 150 mm scale lengths with 5% accuracy. Rotameters can be configured with standard or precision control valve on inlet or outlet. Model 1250's valves can be specified in brass or stainless steel with aluminum or stainless steel fittings.

Mass Flow Controllers accommodate FS flow rate to 55 slpm.

Brooks Instrument    Hatfield, PA 19440
Aug 20, 2010 Modular and user-programmable, ultra-high purity GF Series employs MultiFlo(TM) technology that facilitates reprogramming of gas and full scale (FS) range in less than 30 sec without removal from gas line. Accuracy is optimized via application of gas modeling and compensation for non-ideal/non-linear gases. Along with flow settling times from 300 msec to 1 sec, controllers feature all-metal flow path, NO or NC valves, and multiple communication protocols.

Vaporizer handles all liquid-to-vapor applications.

Brooks Instrument    Hatfield, PA 19440
Jul 14, 2009 Employing heated gas for liquid vaporization, DLI vaporizer delivers chemically pure vapor that is free of decomposition byproducts or liquid carry-over. Vaporizer can accept multiple liquid inlets and generate mixed vapors. Unit is available in designs to accommodate wide range of liquid properties such as low vapor pressures (sub 1 Torr), low flow rates (sub 5 g/hr), and high flow rates (more than 15 kg/hr). Product is offered as fully integrated system or as individual components.