ILVA Flowmeter includes compact stem accessory.

Spirax Sarco, Inc.    Blythewood, SC 29016
Apr 22, 2013 Available in 10 and 12 in. line sizes for saturated steam, liquid, and gas applications, Gilflo ILVA Flowmeter comprises ILVA, compact stem, manifold, and Scanner 2000 steam mass flow transmitter, which can output and display mass flow rates and totals. Specially profiled cone helps to reshape and flatten flow stream profile just before measurement point, so long straight runs are not needed. With compact wafer design, meter can be installed close to pipe bends and valves.

Bronze Safety Relief Valve works with liquid, steam, air, gas.

Spirax Sarco, Inc.    Blythewood, SC 29016
Apr 18, 2013 Engineered for industrial use, SV418 is rated to ASME and National Board Certified standards for Section VIII service – 750 psi for liquid, air, and gas and 300 psi for steam. Multiple-purpose safety relief valve, available in sizes from ½–3 in., is suited for use where quick, accurate reseating and minimal blow-down (or loss of medium) is important and high capacity is required. Applications include but are not limited to pumping stations, water-works, compressors, and accumulators.

Clean Steam Separator meets sterilization requirements.

Spirax Sarco, Inc.    Blythewood, SC 29016
Feb 15, 2013 Constructed of 316L stainless steel, Model CS10 is engineered to overcome problems associated with wet steam and ensure correct quality of steam is supplied to point of use, preventing damage to control valves. Fully traceable unit exceeds steam dryness value of 0.95 and features removable baffle that facilitates periodic de-rouging and inspection. CS10 is engineered in accordance with latest standard of ASME BPE guide for biopharmaceutical, food, and medical industries.

Instantaneous Water Heater only consumes energy on demand.

Spirax Sarco, Inc.    Blythewood, SC 29016
Sep 26, 2012 Equipped with feed-forward temperature control system, RediHeat instantly produces hot water within ±4° of set temperature under varying demands. Unit features spiral tubed helical heat exchanger for efficient heat transfer, plus rugged casing and bourdon tube configuration that allows entire assembly to expand and contract without localized stressing. With blending valve fail-safe design, consumers are protected from being exposed to hot water at temperatures above set point.

Condensate Pump covers complete pressure range up to 200 psig.

Spirax Sarco, Inc.    Blythewood, SC 29016
Aug 17, 2012 Able to be operated by steam, air, or other pressurized gases, Pivotrol® PTF4 high-capacity, pressure-powered condensate pump incorporates dual Pivotrol pumping mechanisms with PowerPivot® technology. Integral electronic cycle counters monitor pump performance, and vent assist valves release pressure in pump body during exhaust stroke for accelerated filling and overall cycling. Also, design promotes serviceability and reliability.

Y-Type Strainer is rated to ASME Class 2500 standards.

Spirax Sarco, Inc.    Blythewood, SC 29016
Aug 16, 2012 Fig 18HP protects equipment from pipeline debris - scale, rust, jointing compound, weld metal, and other solids - in flowing liquids or gases. Suited for Oil and Petrochemical industry as well as other high-pressure applications, alloy steel strainer is capped, drilled, and tapped to enable blowdown valve to be fitted to drain and clean screen in service. Stainless steel, Monel, perforations, and mesh strainer screen options are available.

Digital Valve Positioner supports HART® communications.

Spirax Sarco, Inc.    Blythewood, SC 29016
Jul 16, 2012 Through HART® protocol, SP500 HART® Electro-pneumatic Positioner can be configured and process parameters can be updated or modified remotely using PC or handheld device. Unit is available with 4-20 mA retransmission, software switches, and ability to be powered by external 24 Vdc power supply. Non-contact valve position feedback system facilitates installation while optimizing reliability over traditional mechanical methods.

Stainless Steel Y-Type Strainer meets ASME Class 600 standards.

Spirax Sarco, Inc.    Blythewood, SC 29016
Jun 20, 2012 Available with stainless steel, Monel, perforations, and mesh strainer screen options, Fig 36HP protects equipment from pipeline debris - scale, rust, jointing compound, weld metal, and other solids - in flowing liquids or gases. Screen area maximizes Cv while minimizing pressure drop as well as frequency of blowdown. Suited for Oil and Petrochemical market, strainer is capped, drilled, and tapped to enable blowdown valve to be fitted to drain and clean screen in service.

Stainless Steel Clean Steam Trap resists corrosion.

Spirax Sarco, Inc.    Blythewood, SC 29016
May 23, 2012 Pressure rated to ASME standards, Model BTS7.1 removes condensate from clean steam systems. Self-draining trap operates close to steam saturation temperatures, minimizing condensate back up and effectively venting air to ensure full sterilization. Safeguarding free draining surface, smooth surface finish minimizes risk of bacterial growth and product blockage. Trap is available with tri-clamp option, which is suitable for both ½ and ¾ in. connections.

Y-type Strainer is rated to ASME Class 600 standards.

Spirax Sarco, Inc.    Blythewood, SC 29016
Sep 21, 2011 Constructed of cast carbon steel, Fig 34HP is designed to protect equipment from pipeline debris such as scale, rust, weld metal, and other solids in flowing liquids or gases. Strainer is capped, drilled, and tapped to enable blowdown valve to be fitted to drain and clean screen in service, reducing system downtime. Wide range of strainer screen options are available in stainless steel, Monel, perforations, and mesh, other options include flanged or butt weld connections.