Compact Cordless Bandsaw weighs less than 10 lb.

DeWalt Industrial Tool Co.    Hampstead, MD 21074
May 21, 2010 Capable of cutting threaded rod, uni-strut, conduit, and other metal materials, lightweight 18 V bandsaw model DCS370 offers portability on jobsites and is suited for cutting material on lift or accessing tight spaces. Bandsaw features heavy-duty glass filled nylon base, centered handle for balance in overhead applications, and 2½ in. cutting capacity. Unit is available with 18 V Lithium-Ion battery, 18 V Nickel-Cadmium battery kit, or as bare tool without battery.

Drill Bits withstand high-torque applications.

DeWalt Industrial Tool Co.    Hampstead, MD 21074
Jun 25, 2009 Specifically designed for impact drivers, IMPACT READY(TM) Drill Bits feature one-piece shank design, which helps minimize occurrence of bit breakage. Tapered web design provides added strength in high-torque applications, while pilot point tip allows drilling process to begin rapidly upon contact with drilling surface for burr-free holes. Bits are suited for drilling holes into sheet metal, stainless steel, steel studs, and junction boxes.

Carbide Drill Bits are designed for durability, efficiency.

DeWalt Industrial Tool Co.    Hampstead, MD 21074
Mar 16, 2009 Ranging from 5/32-½ in. in size, SOLID ROCK CARBIDE(TM) SDS Plus drill bits (DW5501-DW5541) are used for drilling holes in hard concrete, reinforced concrete, block, and pan decking. Bonding system, used to affix tip to flute, promotes durability and bit life in tough applications. Featuring full head, 4-cutter design, bits also have 4 flutes to optimize debris removal and increase drilling rates. Users include mechanical contractors, electricians, and general contractors.

Coil Framing Nailer handles wide range of nail sizes.

DeWalt Industrial Tool Co.    Hampstead, MD 21074
Feb 02, 2009 Capable of driving 3 in. nail into engineered lumber, 8 lb D51855 can be used for structural framing, floor decking, roof decking, truss installation, furring strips, wall sheathing, pallet and crate manufacturing, and fencing. It handles 15° wire collated nails from 1½-3½ in. in length and .099-.131 in. dia, and depending on nail size, can hold 200-300 nails. Features include trigger lock-off, four bolt nose design, tool-free depth adjustment, and adjustable, non-slip rafter hook.

Hammerdrill/Drill/Driver offer three-speed transmission.

DeWalt Industrial Tool Co.    Hampstead, MD 21074
Jan 05, 2009 XRP(TM) line of hammerdrill/drill/drivers include three 18 V models: DCD950KX, DCD950VX, and DCD940KX; three 14.4 V models: DCD930KX, DC930VX, and DCD920KX; and 12 V model DCD910KX. XRP(TM) Lithium Ion 18 V model, DCD970KL features Nano-Phosphate Lithium ion battery. Chucks in hammerdrill self-tighten throughout application to prevent bits from slipping. Drills are designed with all-steel transmission, and have metal gear case allowing transmission to dissipate heat and run cooler.

Stud and Joist Drill has 11 A motor for max performance.

DeWalt Industrial Tool Co.    Hampstead, MD 21074
Nov 05, 2008 Built to drill holes in wood using ship auger bits, hole saws, and self-feed bits, DWD460 offers variable speed settings of 0-300 and 0-1,300 rpm for matching application requirements. This ½ in. stud and joist drill also features mechanical, torque-limiting clutch as well as Bind-Up Control(TM) feature that senses stall conditions during use and adjusts motor torque to manageable level. Multi-position, adjustable bail handle and 2-position side handle lend to leverage and control.

Heavy-Duty ½ in. Drills feature high-performance 10 A motor.

DeWalt Industrial Tool Co.    Hampstead, MD 21074
Nov 03, 2008 At 5.2 lb, model DWD215G drill features midhandle grip as well as durable, all-metal keyless ratcheting chuck with automatic spindle lock for bit retention, while DWD210G, at 4.9 lb, offers pistol grip. Handles of both are equipped with antislip soft grip for comfort. Drills include 360° locking side handle and 3-wire cord set. Providing enough power for heavy-duty jobsite applications, each also operates at 0-1,200 rpm.

Portable Band Saw offers 5 in. cutting capacity.

DeWalt Industrial Tool Co.    Hampstead, MD 21074
Oct 22, 2008 Equipped with 10 A motor, Model DWM120 enables users to cut 5 x 4¾ in. rectangular material. Saw features soft grip handle, multi-position front handle, and spring steel shroud with rubber bumper for protection. LED sight light, mounted directly over blade, illuminates line of cut. With 100-350 sfm cutting speed and variable speed dial, saw is suitable for cutting pipe, electrical metallic tubing, unistrut, threaded rod, and other types of material.

Modular Guarding System fits portable table saws.

DeWalt Industrial Tool Co.    Hampstead, MD 21074
Oct 07, 2008 Designed for DW744X, DW744XRS, and DW745 table saws, 3-part Site-Pro(TM) features rise and fall riving knife, anti-kickback pawls, and top guard. Tool-free, adjustable system provides clear line of sight when making cuts. Riving knife is 2.2 mm thick and compatible with 10 in. blades having 2.4 mm min kerf width and 1.7 mm body thickness. Available as accessory, 2.8 mm thick riving knife is compatible with 10 in. blades having 3.0 mm min kerf and 2.5 mm max body thickness.

Corded/Cordless Tracksaws deliver clean, precise cuts.

DeWalt Industrial Tool Co.    Hampstead, MD 21074
Aug 29, 2008 Corded DWS520 and cordless DC351 travel along anti-slip aluminum track for making clean, straight, and precise cuts. Zero-clearance track features anti-splinter edges, and its underside has 2 friction strips to grab material and keep track from moving. Powered by 1,300 W motor, both models feature straight plunge mechanism and 6 ½ in., 48-tooth woodworking blade with laser cut plate and precision ground teeth. Cutting depth on track is 2 1/8 in. @ 90º and 1 5/8 in. @ 45º bevel.