Gyratory Sifter features low profile design for tight spaces.

Kason Corporation    Millburn, NJ 07041
Mar 29, 2013 Measuring 40 in. in diameter, Flo-Thru Vibroscreen® Sifter employs 2 imbalanced-weight gyratory motors mounted on opposing exterior sidewalls. Design allows vertical alignment of top inlet and bottom outlet, causing on-size material to descend through screen in straight-through path. Featuring flat dust cover, sifter installs above or below storage vessels and process equipment. All material contact surfaces are stainless steel with continuous welds polished to cGMP, 3-A, USDA, and FDA standards.

CIP Sanitary 2-Deck Screener scalps and dedusts.

Kason Corporation    Millburn, NJ 07041
Jan 14, 2013 With vibration from imbalanced weight gyratory motor affixed to housing, Clean-In-Place Vibroscreen® Double-Deck Screener removes oversize and undersize particles from on-size materials. This 40 in. dia unit contains 2 horizontally mounted screens in cylindrical housing supported on circular base by rugged springs. Constructed of stainless steel, system has integral Clean-In-Place (CIP) spray wash system as well as quick-disconnect clamps between each screen frame.

Circular Fluid Bed Dryer cuts cleaning time.

Kason Corporation    Millburn, NJ 07041
Oct 29, 2012 With stainless steel material contact surfaces, quick-disconnect housing, and lack of internal cross members, 30 in. Vibro-Bed™ minimizes required cleaning time. Complete system, containing blower, heater, and programmable controls, requires only on-site connections to power source, dust collectors, and material inlet/outlet. Options include: centrifugal screeners, spray nozzles to coat dried particles, and vibratory screeners to scalp, classify, or dedust dried material.

Dewatering-Clarifying Screener separates solids from liquids.

Kason Corporation    Millburn, NJ 07041
Sep 21, 2012 Featuring anti-blinding spray-wash system, Vibroscreen® Dewatering-Clarifying Screener separates solid materials from liquids on batch or continuous basis. Imbalanced weight gyratory motor affixed to housing imparts vibration, causing solid particles to move across screen and exit through upper discharge spout, as liquid flows through screen apertures. Available in 18–100 in. diameters, system features 4–12 spray-wash nozzles, depending on screen diameter.

Sanitary Sifter has space-saving, low-profile design.

Kason Corporation    Millburn, NJ 07041
Jun 01, 2012 Model K30-1FT-SS employs 2 unbalanced-weight gyratory motors mounted on opposing exterior sidewalls. On-size particles pass through 30 in. dia screen in vertical discharge path, and oversize material exits via side discharge spout. All material contact surfaces and floor stand are of stainless steel with continuous welds polished to cGMP, 3-A, USDA, and FDA standards. Offered in diameters from 18-84 in., sifter scalps oversize particles through screen mesh as fine as 38 microns.

Sanitary Screener meets CGMP, 3-A, USDA, FDA standards.

Kason Corporation    Millburn, NJ 07041
May 10, 2012 Constructed of stainless steel with continuous weld seams and material contact surfaces polished to sanitary finish, Vibroscreen® Model K30-1-SS features gap-free screen frames with quick-disconnect clamps. This 30 in. screener also features flexible quick-action connectors at inlet and outlet, clamshell lid, and removable, sanitary magnet at discharge spout. Screens are mounted to support rings using FDA-approved epoxy and sealed using FDA-approved gasket material.

Pressure Sifter scalps bulk materials at 50 tons/hr.

Kason Corporation    Millburn, NJ 07041
Apr 10, 2012 Offered in stainless steel and carbon steel with 72 in. diameter, Vibroscreen® Low-Profile Pressure Sifter removes oversize particles and is engineered to operate under pressure on batch or continuous basis. Connections to incoming line, discharge line for on-size particles, and discharge spout for oversize particles are sealed using pressure sleeve connectors. To minimize height requirements, sifter employs 2 unbalanced-weight gyratory motors mounted on opposing exterior sidewalls.

Sanitary Vibratory Classifier separates into 3 fractions.

Kason Corporation    Millburn, NJ 07041
Dec 21, 2011 Able to separate up to 6 tons/hr of bulk solid material into 3 fractions on batch or continuous basis, 30 in. dia Vibroscreen® Two-Deck Sanitary Classifier is constructed of stainless steel with ground and polished welds. Dust-tight, gravity-fed unit, which classifies materials ranging from dry bulk solids to solids-laden slurries, has 2 horizontal, sanitary, epoxy-mounted screens located one above the other in vertical, cylindrical housing supported on circular base by springs.

Centrifugal Screener accelerates cleaning, screen changes.

Kason Corporation    Millburn, NJ 07041
Nov 09, 2011 Centri-Sifter® model YOB-SS features cantilevered shaft with 2 externally mounted bearings between screening chamber and motor drive, allowing all components to slide freely from shaft end for accelerated cleaning, screen changes, and inspection. System comes in configurations for gravity-fed applications or continuous operation in-line with dilute-phase pneumatic conveying systems, with screen cylinders of Nylon monofilament, woven wire, perforated plate or wedgewire screen.

Vibratory Screener handles materials with oversize fractions.

Kason Corporation    Millburn, NJ 07041
Sep 20, 2011 Vibroscreen® K72-1K-SS (72 in.) discharges oversize particles 360° around periphery of External Kascade circular screening deck instead of through conventional discharge spouts. As material is fed onto center of screening deck, on-size particles pass through screen and funnel to lower discharge chute, while oversize particles flow outward in spiral pattern into high capacity discharge spout. Applications include removal of fines from products such as plastic pellets, cereal, pet food, etc.

Centrifugal Screener features sanitary design.

Kason Corporation    Millburn, NJ 07041
Jul 19, 2011 Intended for food, dairy, pharmaceutical, and chemical applications, Centri-Sifter® features 3-bearing shaft that cantilevers for removal of internal components. External roller bearings located at motor end of shaft and on hinged cover at discharge end provide maximum support and vibration-free operation under heavy loads. Equipped with Clean-In-Place Spray Balls for rapid sanitizing using steam or cleaning solution, stainless steel unit is finished to industrial, 3-A, FDA, and BISSC standards.

Vibratory Classifier separates bulk solids at up to 70 tons/hr.

Kason Corporation    Millburn, NJ 07041
Mar 15, 2011 Vibroscreen® High Capacity, Two-Deck Classifier features 100 in. dia and classifies various bulk materials ranging from dry bulk solids to solids-laden slurries. Unit includes 2 horizontal screens in vertical, cylindrical housing, while clamps between screen frames enable interior access for inspection, screen changes, and wash down. Imbalanced weight gyratory motor affixed to housing generates vibration. Constructed of epoxy-coated carbon steel, unit can operate on batch or continuous basis.

Screener classifies bulk material into 3 fractions at high rates.

Kason Corporation    Millburn, NJ 07041
Feb 07, 2011 Vibroscreen® Flo-Thru screener classifies bulk material by utilizing 2 screening decks and 2 unbalanced-weight gyratory motors mounted on opposing exterior sidewalls. Top inlet and bottom outlet are vertically aligned, so smallest material passes through unit in straight path, and larger material is ejected through spouts at screen peripheries. Offered with diameters from 18-84 in., it also includes quick-disconnect clamp ring assemblies for removal of screen frames.

Sanitary Sifter features low-profile configuration.

Kason Corporation    Millburn, NJ 07041
Nov 23, 2010 Flo-Thru Sanitary Sifter model K40-1FT-SS employs 2 unbalanced-weight gyratory motors mounted on opposing exterior sidewalls of unit, reducing overall height. Intended for filtering oversize particles as fine as 38 microns from dry bulk materials or solids-laden slurries, screener is offered in diameters from 18-84 in. Sifter has quick-release clamps that ease removal of screens and disassembly of frames, and oversize material exits through side discharge spout.

Centrifugal Screener have insulated, quick-clean design.

Kason Corporation    Millburn, NJ 07041
Oct 06, 2010 Insulated, Quick-Clean Centri-Sifter® High Capacity Centrifugal Screener features insulated jacket that maintains temperature of hot/cold materials being sifted while keeping machine's exterior skin closer to room temperature. In addition to sifting and scalping dry bulk materials, stainless steel screener can break up soft agglomerates and/or dewater moist solids or slurries. Horizontally oriented cylindrical screening chamber is fitted with heavy-duty wedgewire screen.

Small-Batch, Centrifugal Sifter can be autoclaved.

Kason Corporation    Millburn, NJ 07041
Jun 10, 2010 Used for screening pharmaceutical powders and other contamination-sensitive products, Ultra Sanitary Mini Centri-Sifter(TM) is constructed of stainless steel with continuous welds ground and polished to sanitary standards. Unit can be disassembled in less than 3 min, providing access to all material contact surfaces, and sanitized manually or in autoclave. Gravity-fed design features rotating helical paddles, cylindrical screens of various materials, and 2 discharge outlets.

Size/Density Separator removes undersize, underweight materials.

Kason Corporation    Millburn, NJ 07041
May 11, 2010 Available in 24-100 in. diameters in carbon steel or stainless steel, Vibro-Air(TM) separator simultaneously uses vibratory screening to remove undersize particles and airflow to remove low bulk density materials. Components include series of strategically placed internal trays as well as vibrating, fine mesh screen with controlled flow patterns. Optional coarse screening deck, positioned above fine mesh screen, can scalp oversize particles from on-size material.

Circular Vibratory Screener features 360° discharge.

Kason Corporation    Millburn, NJ 07041
Jan 06, 2010 Featuring external Kascade deck, 60 in. dia Vibroscreen® is suited for screening wet or dry bulk materials containing large percentage of oversize fractions. Oversize particles flow outward in spiral pattern, and cascade at any point over periphery of circular screen onto spiral vibratory trough that directs material into high capacity discharge spout. Screening deck is also offered on separators ranging from 40-72 in. dia, and as retrofit kit for any make of circular vibratory screener.

Centrifugal Screener features dual screening chambers.

Kason Corporation    Millburn, NJ 07041
Feb 27, 2009 Constructed of stainless steel and finished to 3-A, FDA, and BISSC standards, Centri-Sifter® Twin Centrifugal Screener can sift and scalp dry bulk materials, as well as break up soft agglomerates and dewater moist solids or slurries. Each screening chamber features sliding end cover and 3-bearing shaft that cantilevers for removal of internal components for sanitizing. Screener is suited for food, dairy, and pharmaceutical applications, as well as contamination-sensitive chemicals.

Drying System converts moist solids into dry granules.

Kason Corporation    Millburn, NJ 07041
Dec 02, 2008 Consisting of centrifugal screener, spheroidizer, circular fluid bed dryer, and vibratory screener, Granulizing-Drying System converts non-flowing moist solids discharged from cartridge and vacuum filters, filter presses, and mixers into uniform, compact, dry, de-dusted, free-flowing granules. System is available to 3A, FDA, USDA, and BISSC standards, as individual components or complete system tailored to granulizing applications in chemical, food, and pharmaceutical industries.