Electrical Enclosures are built for hazardous locations.

Hoffman    Anoka, MN 55303 1778
Mar 30, 2012 Type 316 stainless steel ZONEX(TM) enclosures are designed for use in applications where increased safety protection (Ex e) as defined by the ATEX Directive 94/9/EC, is acceptable to safely house electrical components in Zone 1 and Zone 2 rated areas. Hinged covered versions are available in 16 standard sizes and come with NEMA-style mounting feet on the top and bottom. Screw cover versions are available in 5 sizes and feature welded-on, full-width top and bottom wall-mount brackets.

Electrical Input Combiner Box serves solar applications.

Hoffman    Anoka, MN 55303 1778
Mar 16, 2012 Available in POLYPRO(TM) and 14-gauge mild steel models, Hoffman(TM) Solar Combiner Box provides solution for combining electrical inputs for PV applications into one output while offering protection against harsh environmental conditions as well as flexibility to keep pace with emerging demands. Both versions are available in 6- and 12-string configurations and accommodate range of solar panel applications. Combiner boxes include touch-safe fuse holders, with non-load break rating to 30 A max.

Airflow Containment System improves data center cooling.

Hoffman    Anoka, MN 55303 1778
Nov 23, 2010 Consisting of aisle doors, ceiling panels, and chimney stacks, PROLINE® Containment System segregates intake and exhaust air. It can be used for hot or cold air containment, preventing hot and cold air from mixing. Available for use on raised or non-raised floors in small to large data centers, system accommodates 36 and 48 in. aisle ways. Ergonomically positioned interior/exterior grab handles, safety glass, and interior lighting promote network equipment accessibility and visibility.

RoHS-Compliant Cabinets protect rack-mount equipment..

Hoffman    Anoka, MN 55303 1778
Sep 17, 2010 Schroff® brand MIDAS cabinets feature fully welded, heavy-gauge steel frame that enables mounting of equipment, cable management and active cooling products, as well as other accessories. Pre-configured models come in 6 standard sizes, from 23RU-48RU high x 600-700 mm wide x 800-1,000 mm deep. The 700 mm wide communication cabinets can accommodate 19 or 23 in. equipment and cables, and the 600 mm wide server configurations offer square-hole rack angles for 19 in. equipment.

Enclosure Lights are offered with LED, fluorescent options.

Hoffman    Anoka, MN 55303 1778
Apr 22, 2010 Hoffman brand PANELITE(TM) enclosure lights are offered in LED versions that are available in 15 in. lengths, as well as fluorescent units in 15, 18, and 28 in. lengths. With LED models, 140° cone angle casts covering of neutral light within enclosures, and low-maintenance units operate on 24 Vdc, for up to 50,000 hr. Products include on/off switch and plug-and-play terminal connection system with prewired connection sockets, on both ends of light, for ganging in series.

Wall-Mount Enclosures allow scalable component mounting.

Hoffman    Anoka, MN 55303 1778
Mar 16, 2010 Available in 30 metric sizes from 300 x 300 x 225 mm to 1,500 x 900 x 425 mm, Hoffman FUSION G7(TM) Global Wall-Mount Enclosures include galvanized back panel and removable bottom gland plate that facilitate cable entry modifications and wire installation. Internal mounting accessories include full- and half-height back and side panels, front to back side-mount brackets, DIN rail adapter brackets, and swing-out panels - all installed without drilling holes through enclosure walls.

Suspension System supports HMI enclosures up to 281 lb.

Hoffman    Anoka, MN 55303 1778
Nov 18, 2009 SYSPEND(TM) 281-MAX HMI Suspension System is suited for supported/repositioning HMI enclosures and devices. It consists of varying lengths of aluminum tubes, elbows, and adapters. Tubing provides structural integrity and acts as conduit for equipment wiring, and has vertical motion design allowing height-adjustment for pedestal mounting. Ergonomic solution allows operators to move controls into and out of position and also offers variable torque adjustment for rotating components.

Vertical Motion Arms enable adjustment of HMI enclosures.

Hoffman    Anoka, MN 55303 1778
May 01, 2009 Supporting up to 125 lb, SYSPEND Arms allow operators to adjust HMI enclosures and devices to meet vertical and horizontal requirements of various users and applications. Field-adjustable counterbalances let users set and reset lifting force, accommodating weight changes. Arms and enclosure can be swiveled up to 330°, depending on model, with swivel stops available in 30° increments. Monitor and keyboard arm swivels 340° at monitor end and 180° at mounting end.

Heat Exchanger removes up to 3,000 W of enclosure heat.

Hoffman    Anoka, MN 55303 1778
Apr 14, 2009 Compatible with 48 Vdc and 115 Vac power supplies, CLIMAGUARD outdoor heat exchangers are double-crimped and dip-sealed to prevent harsh environmental elements from entering enclosure. With support for both surface- or recess-mounting, lab- and field-tested units are UL Type 12/3R/4 rated and Telcordia GR-487 capable. Maximum 2,000 W of heater option is available on dc and ac volt heaters, and variable-speed blowers come standard on dc-powered units for noise free operation.

Utility Enclosures aid access to aboveground terminations.

Hoffman    Anoka, MN 55303 1778
Mar 10, 2009 Offered in one- and 3-phase models, Utility Junction (UJ) Sectionalizing Enclosures provide aboveground housing for sectionalizing, tapping, or terminating underground distribution systems while resisting outdoor conditions. There are 15 models, available in steel or aluminum, that feature tamper-resistant design as well as self-engaging wind stop. Also included, recessed pentahead latch and interlocked padlock provision ensure enclosure closes securely.