Pipe Wrap Insulation minimizes energy loss.

Pacor Inc.    Cinnaminson, NJ 08077
Aug 03, 2009 Designed for facilitated installation, UltraGard(TM) precut aerogel insulation cuts energy loss and extends pipe rack efficiencies in piping systems used in chemical and hydrocarbon processing operations. Construction consists of silica solids derived from gel in which liquid component has been replaced with gas and reinforced with nonwoven, glass fiber batting. Environmentally safe, hydrophobic product is offered in 5 or 10 mm thicknesses; 1½, 2, and 3 in. widths; and 59½ in. length.

Pipe Wrap Insulation targets petrochemical operations.

Pacor Inc.    Cinnaminson, NJ 08077
Jul 27, 2009 Available for high temperature and cryogenic environments, UltraGard(TM) Precut Aerogel Insulation is hydrophobic and can be used effectively in tight access areas. Aerogels consist of lightweight silica solids derived from gel in which liquid component has been replaced with gas, and reinforced with nonwoven, glass fiber batting. Environmentally safe insulation is available in 5 and 10 mm thicknesses, nominal length of 59½ in., and widths of 1½, 2, and 3 in.

Adhesive Carpeting suits commercial and residential decks.

Pacor Inc.    Cinnaminson, NJ 08077
Feb 23, 2005 DeckSTRIP(TM) adhesive-backed strips of carpet are placed on top of each individual deck board, prolonging life of decks by protecting them from harmful elements. Adhesive release tape backing does not allow water to seep through. Carpet protects users from splinters and provides non-slip surface when wet. Available in 25, 75, and 150 ft rolls, product vacuums clean with standard or shop cleaners, and can be shampooed with carpet shampooers.

Insulation Material provides temperature protection.

Pacor Inc.    Cinnaminson, NJ 08077
Dec 29, 2004 Available in white and black, Manniglas® 2000 and 2002 can be die cut, producing clean edges for gaskets and seals. They also laminate to foil carriers and PSAs for thermal protection and to facilitate assembly. Both types are non-corrosive and mildew resistant. In applications where prevention of contamination is essential, Manniglas 2002 is preferred. Materials are available in standard thicknesses of .030, .060, .125, and .250 in.

Utility Paper offers thermal stability.

Pacor Inc.    Cinnaminson, NJ 08077
Oct 21, 2004 Lytherm 550-L is composed of unwashed spun, high-purity alumina-silica fibers formed into flexible sheet. It features organic binder for handling strength at room temperature, offers chemical stability, and resists attack from corrosive agents. Suited for applications requiring high-temperature protection up to 2,300°F, Lytherm 550-L resists oxidation and reduction. If it becomes wet due to water, steam, or oil, thermal and physical properties return upon drying.

Protective Liner is designed for HVAC equipment.

Pacor Inc.    Cinnaminson, NJ 08077
Sep 13, 2004 Suited for use as acoustical control and thermal liner, flexible MICROMAT(TM) high tensile strength blanket is composed of borosilicate incombustible, non-hygroscopic glass fibers. Unaffected by oil, grease, and most acids, product is available in various densities and thicknesses. It reduces air friction and damage, will not support fungi or vermin, and conforms to physical properties and regulations of ASTM C1071-2000.

Insulation Blankets suit HVAC and OEM applications.

Pacor Inc.    Cinnaminson, NJ 08077
Mar 22, 2004 Valulite(TM) Fiberglass Insulation is made from incombustible, non-hygroscopic, borosilicate glass fibers bonded with thermosetting resin. Blanket-type thermal and acoustical insulation is available in 2 levels of conductivity: Valulite-24 (k = 0.24) and Valulite-25 (k = 0.25). Available in thicknesses and widths from 24-72 in., both are effective at temperatures to 350°F, unfaced, and are unaffected by oil, grease, and most acids.

Wallboard reduces noise from mechanical equipment.

Pacor Inc.    Cinnaminson, NJ 08077
Nov 24, 2003 White Whispertone® Wallboard XG(TM) is bonded with thermosetting resin to produce structurally rigid insulation. Formaldehyde-free, fiberglass insulation resists settling, breakdown, sagging from vibration, and damage from impact. It withstands temperatures to 250°F. Manufactured with incombustible and non-hygroscopic borosilicate glass fibers, wallboards do not collect fungi or parasites and are not damaged by effects of oil, grease, or acids.