Latest New Product News from Measurement Specialties, Inc.
Digital Temperature Sensors offer 3 data output options.Measurement Specialties, Inc. Hampton, VA 23666
May 15, 2013 Able to integrate into industrial control, HVAC/R, and heating/cooling systems, TSYS02 series come in TDFN8 surface mount package that measures 2.5 x 2.5 mm and enables use in high-volume applications for on-circuit temperature control. Fully calibrated products offer I²C, PWM, or SDM (Sigma Delta Modulation) data output option, depending on model, and 16-bit temperature sensing resolution. Drawing 12.5 µA max, -40 to +125°C rated sensors suit automotive and medical applications.
Barometric Pressure Sensor uses I2C communication.Measurement Specialties, Inc. Hampton, VA 23666
May 13, 2013 Operating at 0.6 μA with 1.8–3.6V supply voltage, Model MS5805-02BA01 features conversion time of 0.5 ms with oversampling selection available up to 8192. O-ring sealed pressure sensor module also includes temperature measurement capabilities with temperature accuracy of ±2.0°C and temperature resolution less than 0.01°C. At 0.02 mBar resolution, 24-bit DS ADC has pressure accuracy of ±4 mBar for pressure ranging from 300–1,200 mBar and temperature from -20 to +85°C.
Digital Humidity/Temperature Sensor operates on 1.8 V.Measurement Specialties, Inc. Hampton, VA 23666
Mar 05, 2013 Featuring self-contained design that interfaces directly with microcontroller, Model HTU21D offers adjustable resolution for humidity and temperature of 8/12-bit or 12/14-bit, depending on needed response time. Unit provides data transfer rates up to 400 kHz with 0–100% RH measuring range and typical measurement accuracy of ±2%. Sensor measures temperature from -40 to +125°C with 0.4°C accuracy. Housed in 3 x 3 x 0.9 mm DFN package, device comes standard with I2C interface.
Digital Barometric Pressure Sensor measures 3 x 3 x 0.9 mm.Measurement Specialties, Inc. Hampton, VA 23666
Feb 26, 2013 Consuming 0.6 μA during operation and less than 0.15 μA during standby, MS5637-02BA03 micro altimeter requires 4 pads for operation and uses I²C communication. At max resolution of 0.016 mBar, equivalent to 13 cm of elevation, this 24-bit DS ADC integrated digital pressure sensor has accuracy of ±2 mBar at 25°C for 300–1,200 mBar range and temperatures from -20 to +85°C. Module also includes temperature measurement capabilities, with accuracy of ±2.0°C and resolution of less than 0.01°C.
Vacuum Pressure Sensors include analog and digital versions.Measurement Specialties, Inc. Hampton, VA 23666
Feb 04, 2013 Available at 15 psi pressure range in single sideport, top port, and dual sideport packages, analog Model MS4525 provides full vacuum output of 4.5 Vdc and zero vacuum output of 0.5 Vdc, while digital Model MS4525DO has 14,746 cts output at full vacuum and 666 cts at zero vacuum. Both feature accuracy of ±0.25% span and TEB of ±1.0% span. Operating from -25 to +105°C, sensors provide output pressure resolution of 14 bits and output temperature resolution of 11 bits.
Pressure Transducer operates from -40 to +125°C.Measurement Specialties, Inc. Hampton, VA 23666
Dec 18, 2012 Offering pressure range from 0–15, up to 150 psi, Model U7100 measures liquid or gas pressure and is water-resistant up to 1 m. Pressure cavity is machined from solid piece of 17-4 PH stainless steel, therefore no o-rings or organics are present that could be exposed to pressure media. Featuring ±0.25% accuracy and ±1.0% TEB, automotive-grade transducer has 0.5–4.5 Vdc ratiometric output and provides overvoltage protection to 16 Vdc for both positive and reverse polarity.
Submersible IEPE Accelerometer is certified for depths to 100 m.Measurement Specialties, Inc. Hampton, VA 23666
Oct 09, 2012 Available in ±10, ±80, and ±500 g dynamic ranges, Model 8042-01 operates from -20 to +80°C and offers non-linearity of ±1% and shock protection to 5,000 g. Welded titanium housing, along with integral cable designed for submersible applications, has water block feature that self-seals in case of accidental cuts to cable. Other features include internal shielding and usable bandwidth of 1 Hz to 16 kHz. Tefzel or polyurethane cables are optional.
Digital Output Pressure Sensor features 1-300 psi range.Measurement Specialties, Inc. Hampton, VA 23666
Sep 04, 2012 Configured in backside, header-less design, Model 86BSD features pressure range of 1-300 psi in either absolute or gage reference type. Media isolated, 16 mm piezoresistive silicon pressure sensor is mountable with O-ring seal and utilizes silicone oil to transfer pressure from 316L SS diaphragm to sensing element. Operating from -40 to +125°C, unit provides ±0.1% non-linearity, ±1.0 Total Error Band, and digital output of 10-90% or 5-95% in I2C or SPI interface protocols.
MEMS DC Response Accelerometer supports auto crash testing.Measurement Specialties, Inc. Hampton, VA 23666
Aug 24, 2012 Packaged in rugged housing with shielded low-noise cable specifically designed for crush zone testing, Model 58 features full bridge output configuration with temperature range from -20 to +85°C. Slight amount of internal gas damping provides shock survivability as well as flat amplitude and phase response up to 4,000 Hz. Designed to be adhesively mounted, device operates from 2-10 Vdc excitation with electrical output ratiometric to voltage input.
Universal Magnetic Encoder SoC is used for position measurement.Measurement Specialties, Inc. Hampton, VA 23666
Aug 10, 2012 Supplied in TSSOP, KMA36 system-on-chip combines magnetoresistive sensor array with ADC and signal processing. Contactless sensor uses Anisotropic Magneto Resistive (AMR) technology to measure magnetic field angle of external magnet over rotation of 360° as well as incremental positions along linear magnetic pole strip with 5 mm pole length. Configuration, data communication (I²C), and analog signal output are accessible via TSSOP pins. Self-diagnostics are also included.
Click below for more Product News from Measurement Specialties, Inc.
Other Company News From Measurement Specialties, Inc.
Mar 07, 2013
Measurement Specialties' Temperature Sensors Support Mercy Ships
Feb 15, 2013
Measurement Specialties' Temperature Sensors On-Board Landsat 8 Satellite
Dec 02, 2012
MS5561C Altimeter Pressure Sensor Completes 24 Mile Skydive
Oct 25, 2012
Measurement Specialties Awarded PCB Design Prize
Aug 23, 2012
Measurement Specialties' Temperature Sensors Deployed on Mars Curiosity Rover
Jul 24, 2012
Measurement Specialties' ESP 32DTC Scanners Deployed in HIFIRE Missile Test
Jun 12, 2012
EGCS-D0 Accelerometer Now Available in 10,000g Range
Jan 17, 2012
Temperature Pipe Probe Features Fast Response
Oct 03, 2011
Measurement Specialties Inc. Acquires Celesco
Mar 29, 2011
PCA-375 Series Gage Heads
Mar 28, 2011
Film Technology for Switch Applications
Jan 07, 2011
Measurement Specialties Recognized for Introducing One of the Top 10 Most Innovative Sensor Products in 2010
Sep 09, 2010
Measurement Specialties Announces Acquisition of Pressure Systems, Inc.
Jan 08, 2010
Measurement Specialties to Present at Three Investor Conferences in New York City During Week of January 11, 2010
Mar 23, 2009
MEAS Inclination Sensor Chosen Product of the Year
Feb 02, 2009
Measurement Specialties Announces Acquisition of Atexis Extends Temperature Products Line in Europe and Asia
Feb 02, 2009
Measurement Specialties Announces Acquisition of FGP Instrumentation
Jan 02, 2008
Measurement Specialties Announces Acquisition of Intersema Sensoric SA
Dec 07, 2007
Measurement Specialties Amends Senior Credit Facility: Adds $66 Million Additional Capacity to Revolver
Nov 20, 2007
Measurement Specialties Announces Visyx Acquisition
|Home | My ThomasNet News® | Industry Market Trends® | Submit Release | Advertise | Contact News | About Us|
Brought to you by Thomasnet.com
Browse ThomasNet Directory|