Latest New Product News from Huron Technologies, Inc.
Mold Release Coating extends molding cycles.Huron Technologies, Inc. Leslie, MI 49251
Sep 24, 2012 Intended for manufacturers of in-mold coated and flexible polyurethane molded products, Mold Release Agent 8016 offers unique blend of wax and silicone that helps keep mold surfaces clean. Robotic spray application of coating with low solids output from 12–18 g/min maximizes parts molded per gallon. Formulated to provide unblemished parts at mold temperatures from 110–145°F, water-based agent is suited for automotive steering wheels, handles, office furniture, and interior trim components.
Release Coating optimizes appearance of direct attach soles.Huron Technologies, Inc. Leslie, MI 49251
Jul 02, 2012 Developed to release polyether polyols typically used in manufacturing soles of safety shoes and boots, Release Coating 7996 minimizes scrap rates and build-up in mold cavity. Solvent-based release agent's chemistry aids in production of low gloss, defect-free dual density direct attach parts. Release Coating 7996 is available in 55 gal drums and 345 gal returnable stainless steel totes.
Mold Release Agent suits FKM rubber seal applications.Huron Technologies, Inc. Leslie, MI 49251
Jul 02, 2012 Available in 5 gal pail containers and 55 gal drums, Release Coating 8020 is designed for use in fluoroelastomer applications and developed specifically for molders of FKM encapsulated metal inserts. Reapplication of this water-based, semi-permanent release agent can be done every fifth heat, promoting time conservation and productivity. Product qualities minimize scrap by preventing rubber from sticking and building up on mold surface.
Heavy Duty Paste Wax suits polyurethane molded applications.Huron Technologies, Inc. Leslie, MI 49251
May 29, 2012 Maintaining paste-like consistency to accommodate ambient plant temperatures up to 110°F, Release Coating 8012 clings to vertical mold surfaces, vents, pins, and wire locators. Solvent-based product can be applied by brushing or wiping without complicated spray equipment. Available in 10.5 oz cans and 5 gallon containers, coating is suited for flexible, integral skin, semi-rigid, and rigid polyurethane foam molding including high-speed automotive seating operations.
Mold Release Coating suits 105-135°F processes.Huron Technologies, Inc. Leslie, MI 49251
May 29, 2012 Formulated for molders of automotive armrests and headrests, Release Coating 7979 provides clean molds with minimal build up, extending time molds remain in production. Blend of hydrocarbon solvents dries quickly on mold surface, saving time for manufacturers with fast process conditions. Release Coating 7979 is available in 55 gallon drums and 345 gallon returnable stainless steel totes.
Mold Release Agent suits flexible foam applications.Huron Technologies, Inc. Leslie, MI 49251
Apr 25, 2012 With special blend of hydrocarbon naphtha, Release Coating 7972 delivers effective evaporation in molding conditions with short process times before foam pour. Solvent-based release agent provides optimized surface appearance and release with minimal build up. Available in 5 gallon containers and 55 gallon drums, product is suited for automotive headrests, armrests, and other flexible foam applications.
Water-Based Mold Release Agent leaves minimal build up.Huron Technologies, Inc. Leslie, MI 49251
Apr 25, 2012 Release Coating 7882, formulated for MDI seating foam, is suited for flexible foam applications, such as tractor and off-road vehicle seating. Degree of build up left behind extends time between mold cleanings and promotes time molds remain in production. Also, residue does not require extra strength cleaning methods for removal. Also, degree of slip and ease of release from mold cavities reduce scrap and time/effort in demolding operations.
Concrete Release Agent eliminates color imperfections.Huron Technologies, Inc. Leslie, MI 49251
Mar 27, 2012 Formulated for use on latex and urethane elastomer mold materials, Release Coating 7958 includes additives that prevent mold staining and fouling when used in conjunction with powdered colorants. Coating also provides good slip and facilitates release from forms. Combined with minimal build up, product extends time forms remain in production before cleaning or replacement. Release Coating 7958 is suited for stone veneer, statuary, and structural concrete components.
Mold Release Agent is designed for friction composite materials.Huron Technologies, Inc. Leslie, MI 49251
Mar 27, 2012 Release Coating 7962 protects mold surfaces by forming barrier between mold and composite mixture used in manufacturing process for friction materials such as brake pads, clutch facings, gear tooth facings, and rigid molded blocks. Designed for use from 200 to 450°F, water-based release agent can be used with automated spray systems and has pH value that promotes safety, reduces health concerns for operators, and minimizes corrosive effects.
Mold Release Coating enables 300+ molding cycles before cleaning.Huron Technologies, Inc. Leslie, MI 49251
Feb 27, 2012 Intended for polyurethane molded products using in-mold paint, Release Coating 7840 provides blend of wax and silicone that minimizes buildup. With proper mold care, aluminum molds can realize 300+ molding cycles before thorough cleaning is required. Water-based release agent is formulated to promote easy release and consistent, unblemished parts at mold temperatures from 110 to 145°F. Spray application of 20-30 g/min is sufficient in releasing most in-mold painted parts.
Click below for more Product News from Huron Technologies, Inc.
Other Company News From Huron Technologies, Inc.
Sep 17, 2012
Release Coating 7814: Easy Release for Recylced Crumb Rubber
Aug 15, 2012
Thermoplastic Extrusion Enhanced with Specialty Lubricants
Oct 19, 2011
Release Coating 6981: Water Based Release Agent for Automotive Interior Components
Aug 25, 2011
Spun Concrete Applications Supported with Release Agent 7700
Aug 28, 2009
Huron Technologies, Inc. Announces New Release Coating 7746 for Manufactured Stone and Other Concrete Molded Products
|Home | My ThomasNet News® | Industry Market Trends® | Submit Release | Advertise | Contact News | About Us|
Brought to you by Thomasnet.com
Browse ThomasNet Directory|