Glassware Washers fit low laboratory countertops.

Labconco Corp.    Kansas City, MO 64132 2696
Aug 20, 2012 Available in overall height of 33 in., FlaskScrubber® 33 and SteamScrubber® 33 can be accessed by all lab associates for loading and unloading. SteamScrubbers have top and bottom racks that accommodate accessory inserts for variety of glassware shapes and sizes - primarily beakers and other wide-mouth glassware. Equipped with tower spindle racks that hold up to 36 pieces, FlaskScrubbers handle narrow-necked glassware such as volumetric flasks. All racks are interchangeable among washers.

Filtered PCR Enclosures are suited for DNA sample analysis.

Labconco Corp.    Kansas City, MO 64132 2696
Aug 20, 2012 Providing controlled environment for polymerase chain reaction (PCR) tests, Purifier® Filtered PCR Enclosures minimize cross contamination by producing ISO Class 5 work area and utilizing UV light to denature contaminating DNA/RNA. ISO Class 5 air, created from room air drawn through pre-filter and 99.99% efficient HEPA filter, is constantly projected down over work area in laminar flow pattern. Digital timer provides UV light exposure continuously or selectable increments from 5-240 min.

Biosafety Cabinets accommodate user's microscope.

Labconco Corp.    Kansas City, MO 64132 2696
Aug 17, 2012 Designed for delicate cell research, Purifier® Cell Logic® Biosafety Cabinets provide protection from hazardous particulates. Scope-Ready(TM) option allows customer-supplied microscope to be integrated into cabinet while still conforming to NSF® specifications. Pure-Vu Seal allows clear, ergonomic view into cabinet, and flexible, chemical-resistant eyepiece seal prevents contaminants from escaping. With Temp-Zone(TM) option, heated or chilled samples remain at optimum temperature.

Fuming System fixes latent fingerprints at crime scene.

Labconco Corp.    Kansas City, MO 64132 2696
Aug 17, 2012 Using microburst or traditional cyanoacrylate fuming methods, CApture Portable Fuming System protects user from hazardous fumes. System includes heater with microprocessor-control from 120-350°F in 1° increments to heat Super Glue®; shatter-resistant protective chamber to contain fumes as they react with latent prints; exhaust blower; and particulate/carbon exhaust filter. Equipped with Up, Down, and Set buttons for programming, LCD indicates set point or actual heater temperature.

DNA Sample Concentrator uses centrifugal force and vacuum.

Labconco Corp.    Kansas City, MO 64132 2696
Aug 16, 2012 With built-in, removable diaphragm pump, CentriVap® DNA Centrifugal Concentrator processes DNA samples and other minute quantities of solvents. Up to 60, 1.5 mL and 72, 0.5 mL micro centrifuge tubes may be processed simultaneously. There are 9 user-set programs accessible via buttons, and Quick-Start(TM) One Button Start Up function starts rotor, heater, timers, and vacuum pump. Along with Quick-Stop(TM) Rotor Brake, features include inlet and exhaust traps and optional CentriZap® Strobe Light.

Evidence Drying Cabinet has benchtop form factor.

Labconco Corp.    Kansas City, MO 64132 2696
Aug 16, 2012 With 36 x 28 in. footprint, Protector 3 fits atop standard laboratory cabinetry. Leak-tight Type 304 stainless steel interior withstands degradation by surface disinfectants, and key-activated UV light provides secondary disinfection of interior between cases. Stainless steel rod and 3 stainless steel collapsible/removable wire mesh shelves are supplied as standard, along with HEPA and carbon filtered exhaust, safety glass door with magnetic seal, and red filter system alarm light.

Sample Evaporator uses dry heat and nitrogen blow down.

Labconco Corp.    Kansas City, MO 64132 2696
Aug 15, 2012 Using touchpad for programming of time and temperature, RapidVap Vertex Evaporator is capable of evaporating up to 50 samples simultaneously. System features 5 nitrogen control valves with on/off switches and 50 nitrogen-dispensing nozzles in 5 horizontal rows to introduce nitrogen to samples. Unlike water baths, 900 W dry block heater requires no distilled water and adds no potential source of contamination. Front-mounted pressure regulator shows pressure from 0-45 psi in 2 psi increments.

Sample Preparation System delivers all-in-one functionality.

Labconco Corp.    Kansas City, MO 64132 2696
Aug 15, 2012 CentriVap Complete houses every component needed to begin processing multiple samples in diverse laboratory applications. Concentrator and -50°C Cold Trap, both standard components, help protect vacuum pump from corrosive effects of vapors and fumes as they evaporate from samples. Other features include aluminum rotor that holds up to 40 microcentrifuge tubes and 108, 12-13 mm tubes; chemical-resistant diaphragm pump; and CentriZap(TM) Strobe Light.

Filtered Glove Boxes provide HEPA or ULPA filtration.

Labconco Corp.    Kansas City, MO 64132 2696
Mar 15, 2011 With no detectable leaks greater than 1 x 10^-6 ml/sec, Protector® Filtered Glove Boxes optimize containment certainty. Functionality combines 99.99% efficient HEPA or 99.999% efficient ULPA inlet and outlet filtration with leak-tight physical barrier to protect operator from exposure to potentially hazardous materials. Available with one-piece molded fiberglass or Type 304 stainless steel liners, boxes are compliant to ISO Class 4 standards and offer real-time performance data.

Vacuum Concentrator uses IR heat to speed evaporation process.

Labconco Corp.    Kansas City, MO 64132 2696
Mar 14, 2011 Featuring personal-sized, portable design, CentriVap micro IR has Teflon®-coated aluminum rotor that holds 24 1.5-mL microcentrifuge tubes and transparent infrared glass lid that directs heat over samples to speed evaporation and minimize cross-contamination from condensation. Heater, rated at 300 W, functions in IR, IR and Heat, or Heat Only with temperatures from 95-140°F in 0.1° increments. Teflon-coated diaphragm pump provides 160 mBar ultimate vacuum and 5.5 lpm displacement capacity.