Latest New Product News from ISC Engineering
Over-Mold Strain Relief increases durability of battery clips.ISC Engineering Chino, CA 91710
Oct 02, 2013 Offered as alternative to slip-on boot, over-mold solution for battery clip — electrical device used for jump starting vehicles and also common on test equipment — provides strain relief that adds durability and longevity to assembly. Over-molding also increases insulation and grip as well as aesthetics. Over-molding handles encapsulate soldered connection in plastic for additional protection and strength, and logo space for branding and labels is provided.
Hi-Rel Connectors offer over-molding for harsh environments.ISC Engineering Chino, CA 91710
Sep 18, 2013 Suited for military applications, Small-Scale High Reliability Connectors are designed to withstand extreme temperatures, shock and vibration, corrosion, and submersion up to 3,500 psi. Small-scale molds have endoskeleton pre-mold which serves as durable encapsulate for inner conductors. In addition to multi-flex strain relief, over-mold has unique design that optimizes grip when mating to connector. Wall thickness of 0.100" serves as protective barrier rather than just aesthetic cover.
Circular Over-Mold integrates XLR connector and PCB.ISC Engineering Chino, CA 91710
Aug 08, 2013 Circular over-mold for PCB with Switchcraft XLR connector furthers capabilities of current PCB and connector design by broadening type of connectors that can be integrated with PCB. Integration of XLR and PCB into one over-molded unit streamlines connector's contours, which disguise internal PCB. Inner cap, designed out of hard durometer resin, serves as structure for over-mold, which provides aesthetics of part and integrates strain relief section into mold.
Custom Overmold is available for Molex® XRC connectors.ISC Engineering Chino, CA 91710
Aug 01, 2013 Custom overmold, available for IP67-rated and waterproof Molex® XRC (Extra Rugged Circular) connectors, integrates solid rib strain relief and custom recessed grooves that promote additional grip. Along with providing additional rugged protection to connector, this aesthetic encapsulation helps reduce stress on internal connections that would otherwise occur over time. Customized branding is also available.
Black PVC Boots improves durability of Molex connectors.ISC Engineering Chino, CA 91710
Jul 02, 2013 Typically molded in black PVC, multi-application boots consist of discrete injection molded part that slides over power and signal connectors, such as Molex® microfits and minifits, to improve aesthetics and durability. Design allows use on cable or wire bundles with various ODs, promoting flexibility to accommodate needs of multiple assemblies. Boots can also be made in various molding compounds and colors, and logos are also available.
IP67 Waterproof Connectors are available in overmolded design.ISC Engineering Chino, CA 91710
May 21, 2013 Built to withstand harsh applications, standard and custom IP67-rated connectors feature watertight seal and are designed to withstand shock, vibration, and corrosion. Injection over-molding, which entails 2 different shots (pre-mold and final mold), increases ruggedization. While pre-mold, made of hard durometer polypropylene, serves as protective encapsulater and helps keep contacts in place, final mold is available in various thermoplastics, such as PVC and rubber.
M8 and M12 Connectors feature overmolded design.ISC Engineering Chino, CA 91710
Aug 27, 2012 Suited for industrial automation applications, M8 and M12 Connectors are available in panel mount, cordset, and patchcord styles. Units feature fully potted housing for harsh environments, as well as snap and threaded couplers and various pole configurations. Polypropylene premold protects and encapsulates all electrical connections, while final mold, available in PVC, TPR, and TPE, can be designed with strain relief to prevent cable damage.
Signal and Power Connectors use overmolding for strain relief.ISC Engineering Chino, CA 91710
Aug 15, 2012 Designed to eliminate mismating, fully polarized Microfit Connectors have isolated contacts that prevent terminal damage as well as full locking latch to prevent disconnections. Typical applications include PCs, printers, and mainframes. Slightly larger in size, Minifit Jr. and Sr. offer higher amperage and current capacities and are suited for appliances, telecom, and medical industries. When used with cable or wire harness, overmolding provides added structure and seal in terminals.
Cable Strain Relief Kit fosters custom project development.ISC Engineering Chino, CA 91710
Jul 24, 2012 Available to aid in development of custom strain relief for new or existing project, 24-piece sample kit provides variations of 88,000 ISC strain relief options. Strain reliefs are discrete component injection molded from flexible resin, usually PVC. Products have hole size same diameter of cable being used and are held into place with slot and flange. Design provides structure and support in stressed portion where cable jacket ends and connection is made to component.
Other Company News From ISC Engineering
Jul 15, 2013
New Rapid Prototype's with Functional Connector Integration for Cable Assemblies
Jun 11, 2013
New Multi Connector Single Cavity Over-Molds
Jun 04, 2013
Insourcing Programs for Injection Over-molding of Cable Assemblies
Apr 25, 2013
ISC Engineering Recertified as an ISO 9001:2008 Contract Manufacturer
Mar 08, 2013
Benefits of Modular Tooling for Injection Molding
Nov 16, 2012
Injection Over-Molding for MIL-SPEC Style and COTS Connectors
Nov 01, 2012
Overmold Solutions for Cable Junctions
Nov 01, 2012
Over-Molding for D-Subminiature
Oct 01, 2012
Overmolding Printed Circuit Board Assemblies (PCBA's)
Aug 27, 2012
ISC Engineering Offers Custom Overmold Solutions for Lemo
Aug 06, 2012
US Based Cable Assembly Manufacturer Utilizes Vertical Integration and Lean Manufacturing
Jul 06, 2012
Staying Competitive in the Cable Assembly Business
Jun 22, 2012
The Electric Vehicle (EV) Overmold Cable Solutions
Jun 12, 2012
3-D Printing at the Forefront of Rapid Overmold Prototyping
May 03, 2010
ISC Adds Director-Sales
Jan 09, 2010
Creating Jobs in North America
Jan 04, 2010
ISC Engineering Completes Move into New Facility
|Home | My ThomasNet News® | Industry Market Trends® | Submit Release | Advertise | Contact News | About Us|
Brought to you by Thomasnet.com
Browse ThomasNet Directory|