Current Loop Calibrator includes HART communications.

Fluke Corp.    Everett, WA 98203
Jun 11, 2013 With accuracy of 0.01% of reading, Fluke® 709H minimizes time it takes to measure or source, voltage or current, and power up loop. Test tool supports select set of HART universal and common practice commands. In communicator mode, technicians can read basic device information, perform diagnostic tests, and trim calibration on most HART-enabled transmitters. Calibrator also features built-in, selectable 250 Ω resistor to tune loop for HART communications.

Reference Pressure Gauges combine durability and accuracy.

Fluke Corp.    Everett, WA 98203
May 31, 2013 Comprising 9 models suited for calibration labs and instrument shops, 2700G Series offers full-scale ranges from 100 kPa (15 psi, 1 bar) to 70 MPa (10,000 psi, 700 bar). Instrumental measurement uncertainty is 0.02% of FS, and standard equipment includes 1/4 NPT female to 1/4 BSP male adapter, 1/4 NPT female to M20X.15 adapter, and universal power supply. Also included, USB cable allows communication with computer and power delivery to gauge.

Integrated Visual IR Thermometer accelerates inspections.

Fluke Corp.    Everett, WA 98203
May 29, 2013 Intended for electricians and industrial, HVAC/R, and automotive technicians, VT02 combines visual insight of thermal imager, visual images of digital camera, and point-and-shoot functionality of IR thermometer. Troubleshooting camera with IR heat map instantly detects problems using blended thermal and digital imagery. It displays and saves images as full visual, full infrared, or in 3 blended modes. Temperature reading is provided at center point, and images are saved to micro-SD card.

Test Tools wirelessly connect multiple measurement modules.

Fluke Corp.    Everett, WA 98203
Mar 29, 2013 Based on CAT III 1,000 V/CAT IV 600 V multimeter, CNX Wireless System connects multiple measurement modules and sends simultaneous readings to master device up to 20 m away. Modules, which include AC Voltage, AC Current Clamp, iFlex AC Current Clamp, and K-Type Temperature units, can take live measurements or log up to 65,000 sets of data. Logged data can be saved to computer in .csv format. With system, users can place modules in hazardous areas and watch readings from safe distance.

Dry Block Calibrator conforms to EURAMET cg-13 guidelines.

Fluke Corp.    Everett, WA 98203
Mar 21, 2013 Featuring -95 to 140°C temperature range with ±0.015°C stability, 9190A Ultra-Cool Field Metrology Well covers coldest and warmest temperatures required in pharmaceutical, biomedical, and food processing applications that demand strict quality control and regulatory compliance including on-location validation/calibration of RTDs, thermocouples, and thermometers. Unit with process option features 4–20 mA connectors, reference thermometer input, and 4-wire PRT/RTD input with accuracy of ±0.02°C.

Current Loop Calibrator features HART communications.

Fluke Corp.    Everett, WA 98203
Mar 01, 2013 Providing 0.01% reading accuracy, Fluke® 709H minimizes time it takes to measure or source, voltage or current, and power up loop. Unit features Quick-Set rotary encoder knob, 2-wire connection, and built-in selectable 250 Ω resistor to tune loop for HART communications. In communicator mode, technicians can read basic device information, perform diagnostic tests, and trim calibration on most HART-enabled transmitters. Ramping and auto-stepping enable technicians to perform tests remotely.

Visual IR Thermometer measures temperatures from 14-482°F.

Fluke Corp.    Everett, WA 98203
Jan 09, 2013 Filling gap between thermometers and thermal imagers, Fluke® VT02 combines visual insight of thermal imager, visual images of digital camera, and point-and-shoot convenience of infrared thermometer. Troubleshooting camera with infrared heat map will display and save images as full visual, full infrared, or 3 blended modes of 25, 50, and 75%. Images are saved to micro-SD card and can be imported into SmartView® software for analysis and reporting.

Handheld Oscilloscope achieves 500 MHz at 5 GSPS sample rate.

Fluke Corp.    Everett, WA 98203
Nov 28, 2012 Intended for electronic troubleshooters, Fluke® 190 Series II 500 MHz ScopeMeter® Test Tool delivers scope with bandwidth and resolution to capture any signal while in field. Two-channel 190-502 model, with bandwidth from 60, 100, 200, and 500 MHz, supports 5 GSPS sample rate for accuracy and clarity of shape and amplitude of unknown waveform phenomena. ScopeRecord™, TrendPlot™, advanced triggering, and automatic measurements functions are included.

Wireless Multimeter System enables reading from safe distance.

Fluke Corp.    Everett, WA 98203
Nov 23, 2012 Designed to wirelessly connect multiple electrical and temperature measurement modules, Fluke® CNX Wireless System sends simultaneous readings to master device up to 20 m away. Unit is based on CAT III 1000 V / CAT IV 600 V multimeter with screen that displays its readings along with live readings from up to 3 other measurement modules. For more complex troubleshooting, users can view live measurements from up to 10 modules simultaneously on computer equipped with CNX PC Adapter.

Process Calibrator offers simultaneous sourcing, measurement.

Fluke Corp.    Everett, WA 98203
Nov 09, 2012 With isolated measurement channel, 7526A can calibrate RTD and thermocouple readouts, pressure gauges, temperature and pressure transmitters, digital process simulators, data loggers, and multimeters. Benchtop unit simulates and measures 9 RTD and 13 thermocouple types, can measure pressure to within 0.008% of reading, sources and measures 0–100 Vdc to within 0.004% of reading, sources DC current from 0–100 mA, measures DC current to within 0.01% from 0–50 mA, and supplies 24 Vdc loop power.