Latest New Product News from Thomas & Betts Corp.
Cable Edge Clips install on solar panels without tools.Thomas & Betts Corp. Memphis, TN 38125
Aug 26, 2014 Designed to fit frame thicknesses from 0.06–0.12 in., Ty-Rap® High-Performance Cable Edge Clips manage up to four, 10 AWG solar PV control cables, and can be removed without tools or cutting. Acetal clips are weather-resistant and perform for more than 20 years outdoors with operating temperatures from -85 to 194°F, while UV- and weather-resistant Nylon 6-6 clips are heat stabilized to retain strength and stability in hot solar PV applications with operating temperatures from -40 to 220°F.
LED Lighting offers ATEX and/or IECex Zone 1 certifications.Thomas & Betts Corp. Memphis, TN 38125
Jun 12, 2014 Available in polycarbonate or glass, DTS XFFL Range Tubular LED Fitting offers operating life of more than 100,000 hr and output of 5,000 lm with 100% yield. Components are mounted on sliding gear tray to facilitate installation and maintenance, and may be retrofitted into existing fixtures mounted with T8 lamps. Providing instant-start illumination and re-strike, DTS XLF Range LED Floodlight features operating life of 50,000+ hr, narrow-beam output of 9,000 lm, and wide-beam output of 7,000 lm.
Cable Glands reduce risk of explosions.Thomas & Betts Corp. Memphis, TN 38125
Jun 06, 2014 Designed to meet European ATEX directives for protecting employees, public, and environment from accidents due to explosions, Kopex-Ex™ SWA/SWB Cable Glands terminate steel wire armored (SWA) and steel wire braid (SWB) cable in control, instrumentation, power, and telecommunications applications. Products are applicable in oil and gas processing as well as marine environments; operate in temperatures up to 194°F; and also suit low-smoke, halogen-free, and flame-retardant applications.
Universal Conduit Elbow enables 4:1 SKU reduction.Thomas & Betts Corp. Memphis, TN 38125
Apr 11, 2014 Replacing 4 conduit body configurations, T&B® Rigid Fittings BlueKote® Universal Conduit Elbow (LU) Form 8 enables fiber-optic cable to be run in ¾ in. system, instead of 2 in. system, and maintain cable bend radius. Angled covered port facilitates wire pulling and uses standard covers. While UL listing as enclosure permits internal splices, rating for 40% wire fill avoids need to de-rate system. BlueKote 4-layer protection provides internal and external corrosion resistance.
Linear Fluorescent Lighting installs at various angles.Thomas & Betts Corp. Memphis, TN 38125
Mar 28, 2014 Part of Hazlux® Hazardous Location Lighting, XFM and DFP Series Fixtures provide installation at various angles. XFM Series, designed for explosive atmosphere locations, features five ½ in. NPT hub entries on each end. Units come in 2 and 4 ft lengths for 2, 3, and 4-lamp combinations. DFP Series, designed for hazardous locations in industrial and wet environments, features optional mounting brackets that enable precise aiming in multiple angles. Units come in 2, 3, 4, 5, and 6-lamp models.
NEC-Compliant Receptacle Cover is non-metallic and weatherproof.Thomas & Betts Corp. Memphis, TN 38125
Feb 12, 2014 Red•Dot® Code Keeper® Extra-Duty Non-Metallic Weatherproof While-In-Use Cover aids compliance with NEC® requirements, specifically NEC Sections 406.9 (B) (1) and 590.4 (D) (2), for receptacles in wet locations. Featuring stainless steel hinge pin, cover is configured for GFCI receptacles; included adapter plates accommodate single, duplex, and switch configurations. Single- and 2-gang configurations come with 2 7/8 and 4 ¼ in. deep covers; single-gang configurations add 2 ¼ in. deep cover.
Grounding Connectors offer direct 600 A, 25 kA capability.Thomas & Betts Corp. Memphis, TN 38125
Dec 23, 2013 Elastimold® Grounding Device (GAD) provides direct 600 A, 25 kA-rated connection. While Series GAD and GADDR are designed for standard C-clamp ground connections, Series BGAD and BGADDR are designed for ball-stud ground connections. Permanent and safe, product connects to rear interfaces of 600 A series elbow connectors to ground circuit. To remain open, insulated cap with capacitive test point ensures no voltage is present. Once de-energized, circuit is grounded through cable to system ground.
Multi-Cable Connector can serve diverse utilities applications.Thomas & Betts Corp. Memphis, TN 38125
Nov 15, 2013 Available with 25/28 kV rating, Elastimold® ComboT™ Integral Separable Connectors accommodate multiple cables in one connector. Design eliminates need to modify/replace entire enclosures and helps conserve space in switchgear cabinets, optimizing use of full capacity of existing gear without being limited by connection clearance. This also promotes installation safety and efficiency. Connection system eliminates blind assembly and minimizes chance of cross threading.
Cable Joint facilitates cable splicing.Thomas & Betts Corp. Memphis, TN 38125
Oct 11, 2013 Featuring single-piece body, Elastimold® Shrink-Fit™ Cable Joint can be installed using self-ejecting 4-piece plastic support core, which reinforces openings at both sides of joint and can be removed by hand. Unit combines convenience of pre-molded splicing with range-taking versatility of cold-shrink methods, without use of ripcords or integral braids. Made of molded EPDM elastomer, joint covers wide range of cable sizes, and can be used with aluminum or optional copper compression splice.
Wall Box Extender finishes deeply installed electrical boxes.Thomas & Betts Corp. Memphis, TN 38125
Jul 30, 2013 Featuring adjustable mounting depth with maximum extension of 1 in., Carlon® Non-Metallic Single- or Multi-Gang Box Extender provides flush finish for electrical boxes that are installed too deeply in wall, which may occur during remodeling. One-piece solution can be used on single-gang box, or combined with other extenders for multi-gang applications. UL listed and compliant with NEC Article 370-20, extender includes two 6-32 x 1 ½ in. screws.
Click below for more Product News from Thomas & Betts Corp.
Other Company News From Thomas & Betts Corp.
Jan 22, 2014
Thomas & Betts' Introduces New T&B Mobile 2.0 iPad Application
Jan 08, 2014
Carlon® DraftTight® Old Work Box Offers Greater Energy Efficiency in Remodeled Homes
Oct 22, 2013
Carlon® Horizontal Adjust-A-Box® Wins Showstopper Recognition at 2013 NECA Convention
Jul 11, 2013
Thomas & Betts Teams with ABB to Offer Data Centers Safer, Selectively Coordinated RPPs and PDMs
Jun 12, 2013
eFab(TM) Configurator by Thomas & Betts Simplifies Prefabricated Rough-In Assembly Design
Jun 05, 2013
Thomas & Betts Strut Metal Channel Packaging System Provides Superior Protection, Mobility
Jan 17, 2013
Ty-Rap® Flame-Retardant Cable Ties Provide Added Safety for Public Areas
Dec 05, 2012
Catamount® Twist Tail® Cable Tie Wins Innovation Showcase Award
Nov 29, 2012
Kindorf® Solar Panel Fittings are Designed for Fast and Easy Installation
Nov 27, 2012
T&B® Fittings Stainless Steel Conduit and Couplings Protect against Corrosion in Harsh Environments
Aug 14, 2012
Blackburn® Copper-Clad Aluminum Lugs and Splices First to Be UL® Listed
Nov 15, 2011
Hazlux® 5 HID Lighting Fixtures Designed for Safe Operation in Hazardous Environments
Sep 27, 2011
T&B® Fittings XD Expansion/Deflection Coupling for Rigid Conduit
Jul 12, 2011
Thomas & Betts' Strut Assembly Components Electro-Galvanized Finish Outperforms Competitors
Jun 30, 2011
T&B® Fittings Stainless Steel Form 8 Conduit Outlet Bodies Provide Superior Corrosion Protection
Jun 28, 2011
2011 NEC® Code Changes Reviewed in Free Reference Guide from Thomas & Betts
Jun 22, 2011
Hazlux® H3 Fluorescent Emergency Lighting Systems Built to Withstand Adverse Industrial Locations
May 10, 2011
Thomas & Betts/Kopex® International (CMG) Highlights Hazardous Area Cable Management
May 03, 2011
Joslyn Surge Protection Products from Thomas & Betts Ensure Reliable Operations
Apr 26, 2011
Thomas & Betts Cyberex® Cyberwave Three-Phase UPS Features Advanced Topology
Feb 08, 2011
Thomas & Betts Electrical Conduit and Fitting CAD Models are Now Available Online
Nov 18, 2010
Steel City® Pre-Fab Box Bracket with Far-Side and Cable Support Combines Three Products in One
Nov 04, 2010
Homac(R) Encapsulated Multi-Tap Connector Blocks and Splices Feature Clear PVC for Greater Visibility
Sep 16, 2010
Conduit Body Features Double Coating for Enhanced Protection in Corrosive Environments
Jul 30, 2010
Thomas & Betts Surge Protection(TM) Products for Alternative Energy Applications
Jul 14, 2010
Thomas & Betts Offers Free Merchandising Display Racks for Homac® Connectors
May 06, 2010
Thomas & Betts' Joslyn Hi-Voltage(TM) VacStat® Vacuum Interrupter Monitor
Dec 01, 2009
Auto Dealer Prep Center Makes Employees Comfortable and Earns LEED Points
Jan 29, 2009
New Fixture Shallow/Fixture Deep Boxes Offer Corrosion-Resistant Aluminum Alloy Material
Mar 19, 2008
Thomas & Betts Expands Ty-Duct Line With Four New Accessories
Mar 07, 2007
Thomas & Betts Engineer Wins NEMA Kite & Key Award
Mar 02, 2007
Thomas & Betts Offers Online RoHS Compliance Catalog Number Search
Jan 11, 2006
Thomas & Betts Builds Christmas Tree with Kindorf® Struts for Memphis Headquarters
Oct 18, 2005
Thomas & Betts Named Affiliated Distributors' Supplier of the Year, Overall A-D Leadership
Sep 19, 2005
Thomas & Betts Corp.'s Athens, Tenn. Manufacturing Facility Named One of IndustryWeek's Top 10 Plants for 2005
|Home | My ThomasNet News® | Industry Market Trends® | Submit Release | Advertise | Contact News | About Us|
Brought to you by Thomasnet.com
Browse ThomasNet Directory|