Copper Cell Culture Products use thermal active gel insulation.

Caron Products & Services, Inc.    Marietta, OH 45750 0715
Mar 21, 2013 Serving as portable tray to facilitate laboratory transportation, Gelf™ Pod increases incubatory temperature stability and will accommodate entire row of standard cell culture vessels. Gelf™ Pod Incubator, offering temporary storage solution for high volume cell culture laboratories, fits inside BSC and can be set up to provide CO2. Designed to fit into 6–6.5 cu ft benchtop incubators, Gelf™ Shelf adds extra layer of thermal and antimicrobial protection for cells.

CO2/O2 Incubator facilitates hypoxic research.

Caron Products & Services, Inc.    Marietta, OH 45750 0715
Sep 13, 2011 Creating ultra-stable conditions for cell culture, Oasis 6404 can precisely suppress and control oxygen concentration down to 1%. Unit includes IR sensor, tri-zone heating design, and overnight decontamination cycle with drying phase that eliminates cabinet wipe-down. Available in 115 V, 60 Hz or 230 V, 50/60 Hz, Oasis 6404 provides 6 ft³ capacity in benchtop or stackable format. Incubator has polished stainless steel interior with covered corners and antimicrobial powder-coated exterior paint.

Benchtop CO2 Incubators utilize active gel insulation.

Caron Products & Services, Inc.    Marietta, OH 45750 0715
Jan 13, 2011 Available in non-refrigerated and refrigerated versions, 10 ft³ Benchtop GelJacket CO2 incubators incorporate active gel insulation technology inside every wall of chamber to optimize heat retention. GelJacket technology eliminates maintenance requirements, such as adding algaecide, as well as draining/filling of water. Other features include automatic 90°C moist heat decontamination cycle, gVapor(TM) controlled RH technology, and tool-free removal of interior components.

Insect Growth Chamber offers rearing-specific features.

Caron Products & Services, Inc.    Marietta, OH 45750 0715
Oct 26, 2010 With 10 ft³ work space, Model 6015 Benchtop Insect Growth Chamber offers biologists ways to rear insects for entomological studies. Features are designed to support insect rearing in environmental chamber, including phenolic-coated coils that resist corrosion. Other features include gROD(TM) (Refrigeration on Demand), control system, and gVapor(TM) steam-free humidity system. Stainless steel interior offers tool-free adjustment of chamber configuration.

Benchtop CO2 Incubator features IR sensor and tri-zone heating.

Caron Products & Services, Inc.    Marietta, OH 45750 0715
May 07, 2010 Designed to maintain high relative humidity and precisely control temperature and CO2, Oasis(TM) Model 6400 provides safe environment for cell and tissue cultures to flourish. Stackable unit features 6 cu ft of stainless steel interior volume, intelligent control panel, and ISOCIDE antimicrobial powder-coated exterior. Overnight decontamination cycle with drying phase eliminates cabinet wipe-down.

Bright Light Fixture allows expanded incubator applications.

Caron Products & Services, Inc.    Marietta, OH 45750 0715
Jun 30, 2009 Optimized for light transmission with minimal heat generation, expandable and waterproof gLux(TM) features modular and adjustable light banks that let users fill incubator with general or direct lighting of various intensities. This energy-efficient, high-output lighting system comes standard in 10 and 25 ft³ Diurnal Incubators or is available as accessory for all other 10 and 25 ft³ products as accessory number LGHT301 or LGHT303.

Environmental Chamber efficiently fosters insect growth.

Caron Products & Services, Inc.    Marietta, OH 45750 0715
Jun 11, 2009 Along with 25 ft³ capacity, Model 6025 offers all components necessary to withstand harsh environment created with insect rearing. Standard features specific to its functionality include corrosion-resistant, phenolic-coated coils; gROD(TM) refrigeration on demand control system; and gVapor(TM) steam-free humidity control system. Stainless steel interior resists corrosion inherent in rearing process, and heavy-duty casters let chamber roll through 34 x 80 in. doorway without modification.

Heated Incubator/Environmental Chamber has 25 ft³ capacity.

Caron Products & Services, Inc.    Marietta, OH 45750 0715
May 13, 2009 Model 6023 features stainless steel interior, sliding shelves (adjustable), and full temperature range of 5°C above ambient to 70°C, controlled with drift-resistant RTD that maximizes temperature stability over time. Tool-less removable interior facilitates cleaning and configuration changes to minimize downtime, while horizontal airflow system maintains uniformity. Heavy-duty casters enable unit to roll through standard 34 x 80 in. doorway without modification.

Incubators come in refrigerated and diurnal models.

Caron Products & Services, Inc.    Marietta, OH 45750 0715
May 01, 2009 Available in 25 ft³ and redesigned 10 ft³ versions, Refrigerated Models 6011/6021 and Diurnal Models 6012/6022 are designed for medium to large loads with full temperature ranges from 5-70°C. Units are earth-friendly and include gROD(TM) Refrigeration on Demand control system, which manages power consumption. Both types also have built-in foam insulation, blower motor, and refrigeration system, allowing units to operate on standard 115 V, 20 A outlet.

Environmental Chambers and Incubators feature Green design.

Caron Products & Services, Inc.    Marietta, OH 45750 0715
Mar 16, 2009 Featuring earth-friendly technologies, Environmental Chambers and Incubators are available in 25 and 10 cu-ft capacities. All contain gVapor(TM) steam-free humidity system, which delivers controlled humidity without wasting energy or generating heat, and gRod(TM) refrigeration on demand, which manages power consumption. Designed to recycle and utilize tap water, CRYS102 Universal Condensate Recirculation System acts as water delivery system for any CARON humidity controlled chamber.