Mechanical-Drive Riding Trowel combines power and ergonomics.

Allen Engineering Corporation    Paragould, AR 72451
Mar 21, 2013 Suited for large and small contractors, MSP 455 is powered by 40 hp, air-cooled, gasoline engine and incorporates heavy-duty gearboxes and spiders, hydraulic power steering with independent manual pitch controls, and torque converter clutch system. Raised operator platform and hydraulic joystick positioning promote ergonomics, while two 46 in. dia, 5-blade, non-overlapping rotors operate at speeds up to 165 rpm. For application of retardant, electric-powered spray system is included.

Power Buggy provides traction on inclines and soft soils.

Allen Engineering Corporation    Paragould, AR 72451
Jan 11, 2013 Constructed with rugged steel frame, AT-16 Power Buggy with Track Drive is equipped with 27 hp Kohler gasoline engine, 2-speed hydrostatic drive for loaded and transport modes, and heavy-duty poly dump bucket with 16 ft³ capacity. Hydraulic dump action provides 6 in. of ground clearance when fully dumped. Featuring 2,500 lb payload, USA-made buggy includes rubber tracks, complete operator control, and 2 work lights for optimal visibility.

Ride-On Roller Screed utilizes 8 in. diameter paving tubes.

Allen Engineering Corporation    Paragould, AR 72451
Jun 19, 2012 Powered by 44 hp Kubota Turbo Diesel engine, RS800 Series Rollerscreed is available in widths of 14-34 ft with working widths of 12-32 ft. Ride-on steerable machine features 4 lights located on front and back, emergency kill switches on both ends and operator panel, adjustable seat and armrests, and manual crank removable dolly jacks with foam-filled pneumatic tires. Drive tube and paving tube scrapers are provided to eliminate concrete built-up.

Riding Trowel features all-hydraulic powered design.

Allen Engineering Corporation    Paragould, AR 72451
May 21, 2012 Driven by 74 hp Kubota Turbo Diesel engine, Model HDX 750 features automatic load sensing device, 60 in. diameter 6-bladed rotors for uniform blade and pan coverage, and Generation III joy stick power steering with independent hydraulic blade pitch controls in each joystick. Lights, key switch, tachometer, and 12 V charger are in one location. Additional features include adjustable seats/arm rests, powered spray system for retardant application, and removable steps for blade access.

Walk-Behind Power Trowels offer rotor speeds up to 150 rpm.

Allen Engineering Corporation    Paragould, AR 72451
Feb 24, 2012 Suited for concrete contractors, Models VP436 and VP446 are equipped with 36 in. and 46 in. rotors, respectively. Trowels provide height adjustable handles with either twist-action blade pitch control or lever-action positive pitch control. Driven by Honda engines, machines also feature cast iron spiders, pressure plates, and lift levers along with lifting bars.

Riding Trowel edges to within 5/16 in. of wall.

Allen Engineering Corporation    Paragould, AR 72451
Jul 21, 2011 Powered by GX690 (688 cc) air-cooled Honda gas engine, MP 235 Edger employs heavy-duty drive train, standard-duty gearboxes, and two 4-bladed, 36 in. dia, non-overlapping rotors. Torque converter clutch system gives operator full variable speed control (to 145 rpm) of rotors, and rotating guard rings let operator run along edges of walls as well as around columns and pipes to achieve clean finish. Other features include manual steering and electric-powered spray system.

Mechanical Drive Riding Trowel operates in tight spots.

Allen Engineering Corporation    Paragould, AR 72451
Mar 22, 2011 Operating on 688 cc, air-cooled Honda GX690 gasoline engine, Model MP 215 is equipped with two 36 in. diameter, 4-blade non-overlapping rotors, and torque converter clutch system, which gives operators full variable speed control of rotors up to 145 rpm. Entry-level riding trowel includes manual steering and blade pitch controls, and electric-powered spray system for application of retardant. Flip-up seat and removable screen enable access to engine, clutch, and drive-line.

Entry-Level Riding Trowel offers variable speed operation.

Allen Engineering Corporation    Paragould, AR 72451
Jan 03, 2011 Powered by GX690 (688 cc), air-cooled Honda gasoline engine, MP 315 incorporates heavy-duty drive train, standard-duty gearboxes, and two 46 in. dia, 4-blade, non-overlapping rotors. Frame facilitates servicing, and torque converter clutch gives operator full variable speed control of rotors to 145 rpm. In addition to manual steering and blade pitch controls, rider features 4 lights, 12 V charger, and electric powered spray system for application of retardant.

Mechanical Drive Riding Trowel facilitates concrete finishing.

Allen Engineering Corporation    Paragould, AR 72451
Dec 03, 2010 Intended for use by concrete finishers, Mechanical Super Pro (MSP) 445 combines features needed to pan through tough pours. Rider is powered by 40 hp, air-cooled Kohler gasoline engine and employs torque converter clutch system. Additional features include manual steering and pitch controls as well as two 46 in. dia, 5-blade, non-overlapping rotors rated to 165 rpm. Also included, electric powered spray system enables application of retardant.